Costar CCI5100 Owner's manual

Costar
Brand
Costar
Model
CCI5100
Category
Security cameras
Type
Owner's manual
Network Box Camera
Instruction
Manual
English Version 1.1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT
OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT
REMOVE COVER. NO USER SERVICABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The
lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the
product’s enclosure that
may be
of sufficient magnitude to
constitute a risk of electric shock.
The
exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature
accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT
EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY
INSERT.
Precautions
Service
13.
Servicing
-
Do not attempt to service this video
equipment yourself as opening
or
r
e
m
oving co
v
e
r
s
may
expose
you to dangerous voltage or other
hazards.
Refe
r
all servicing to qualified service
pe
r
sonne
l.
14.
Conditions Requiring Service
-
Unplug this video
product from the
wa
ll
outlet and
refer
servicing to
qu
a
l
ified service personnel under the
f
o
ll
owing
cond
itions:
•
When
the power supply cord or plug is damaged.
•
If liquid has
been
spilled or objects
have
f
a
ll
en
int
o
the
video
pr
oduct.
•
If the
video
product has been
exposed
to
rain or
water
.
•
If the
video
product
does
not operate normally by
f
o
ll
owin
g
the operating instructions. Adjust only
those controls that are covered by the operatin
g
instructions. Improper adjustment of other
co
ntr
ols
may
result
in
damage
and
will
often
r
e
quir
e
extensive
work by a
q
u
a
l
ified technician to
r
es
t
or
e
the
video
product to its normal operation
.
•
If the
video
product
has been dropped
or the cabinet
has been damaged.
•
When
the
video
product exhibits a distinct change
in performance. This indicates a need
for
service.
15.
Replacement
Parts
-
When
replacement parts
ar
e
required,
have
the service technician verify that the
replacemen
ts used
have
the same safety
characteristics as the original parts. Use of
replacements specified by the
video
pr
oduct
manufacturer can prevent fire,
e
l
ec
tric
shock
o
r
other hazards.
16.
Safety Check
-
Upon completion of
any
service
or
repairs to this
video
product, ask the service
technician to perform safety checks
r
eco
mme
nded
by the manufacturer to determine that the video
product is in safe operating
co
ndition.
17. Wall or
Ceiling Mounting
-
The cameras provided
should be mounted to a w
a
ll
or ceiling
o
n
l
y
as
instructed in this guide, using the provided
mounting
br
acke
ts.
18. Heat
-
The product should be situated
away
fr
om
heat sources such as radiators, heat
r
e
gis
ter
s,
stoves,
or other products (including amplifiers) that
p
r
oduce
heat.
Use
19.
Cleaning
-
Unplug the
video
product from the
wall
outlet
be
f
o
r
e
cleaning.
Do
not use
l
i
quid
c
l
e
a
ne
r
s
or
ae
r
oso
l
cleaners. Use a damp cloth
for
c
l
e
a
ning.
20.
Product and
Cart
Combination
-
Video
and
c
a
rt
combination should be moved with
c
a
r
e.
Quick
stops,
excessive
force, and
uneven
surfaces may
cause the
video
product and cart combination
t
o
o
v
e
rturn.
21.
Object and Liquid Entry
-
Never push objects of any
kind into this
video
product through openings as
they may touch dangerous voltage points
or
“short-out”
parts that could
result
in a fire
or
e
l
ec
tric
shock. Never
spill
liquid of any kind on the
video p
r
oduc
t.
22.
Lightning
- For
added
protection
for
this video
product during a lightning storm, or when it is
l
e
ft
unattended and unused
for
l
ong
periods of time,
unplug it
from
the wall outlet and disconnect the
antenna
or
c
a
b
l
e
system. This
will
p
r
e
v
e
n
t
damage
to the
video
product due to lightning and power line
su
r
ges.
Important
Safeguards
In addition to the careful attention
devoted
to quality standards in the manufacturing process of
your
video
product, safety is a major factor in the design of
every
instrument.
However,
safety is
your responsibility too. This sheet lists important information that will help to assure your
enjoyment and proper use of the
video
product and
accessory
equipment. Please read them
carefully before operating and using your
video
product.
Ins
t
allation
1.
Read and Follow Instructions
-
All the safety and
operating instructions should be
r
ead befo
r
e
the
video
product is operated.
F
o
ll
o
w
all
op
er
ating
ins
tr
uctions.
2.
Retain Instructions
-
The
safety and operating
instructions should be retained for future
r
e
f
e
r
ence.
3.
Heed Warnings
-
Comply with all warnings on the
video
product and in the operating ins
tru
ctions
.
4.
Polarization
-
Do not defeat the
safety purpose of the polarized
or
grounding-type plug.
A polarized plug has two blades
with one wider than the
o
t
h
e
r.
A grounding type plug has two
blades
and
a third grounding prong.
The wide blade or the third prong
are provided for
you
r
safety.
If the provided plug does not fit into
you
r
outlet,
consult an electrician for replacement of the
obsolete outlet.
5.
Power
So
u
r
c
e
s
-
This
video
product should be
ope
r
at
ed
only from the type of
po
w
e
r
sour
ce
indicated on the marking label. If
you
are not sure of
the type of power supply to your
l
oc
a
tion,
co
nsult
your
video
dealer or
l
oc
a
l
power
company.
For video
products intended to operate from ba
ttery power,
or
other sources,
refer
to the operating ins
tru
ctions
.
6.
Overloading
-
Do not overload wall outlets
o
f
extension cords as this can
result
in the risk of
fire
or electric shock.
Overloaded AC
outlets, extension
cords,
f
r
ay
ed po
w
e
r
cords,
damaged
or
c
r
a
c
k
ed
w
i
re
insulation, and broken plugs are
dange
r
ous.
They
may
result
in a shock
or
fire hazard.
P
e
r
i
od
i
c
a
ll
y
examine the
co
r
d
,
and if its
appearance
indic
a
t
es
damage or deteriorated insulation,
have
it
r
e
plac
ed
by your service
t
e
chnician.
7.
Power Cord Protection
-
Power supply cords should
be routed so that they are not
lik
e
l
y
to be walked on
or pinched byit ems placed upon or against them,
paying
particular attention to cords at plugs,
convenience
r
ecep
t
ac
l
es,
and the point where they
exit from the
video
pr
oduct.
8.
Ventilation
-
Slots and openings in the case
ar
e
provided
for
ventilation to ensure reliable oper
a
t
ion
of the
video
product and to protect it
fr
om
overheating.
These openings
must not be blocked
or
covered. The
openings should never be blocked by
placing the
video
equipment on a bed, sofa, rug,
or
other similar surface. This
video
product should
ne
v
e
r
be placed near or over a radiator or heat
register.
This video
product should not
be
placed in a
built-in installation such as a
bookcase
or
r
a
ck
un
l
ess
proper ventilation is provided or the video
product manufacturer’s instructions
have
been
fo
ll
o
w
ed.
9.
Attachments
-
Do not use attachments
unl
ess
r
eco
mm
ended
by
the
video
product manufacturer as
they may
cause
a h
aza
r
d.
10.
Camera Extension Cables
–
Check
the rating of
your extension
cable(s)
to verify compliance with
your
l
oc
a
l
authority regulations prior to in
s
t
all
a
tion
.
11. Water
and Moisture
-
Do not use this
video
pr
oduct
near water. For example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a w
e
t
basement, near a swimming pool and the
lik
e.
Caution: Maintain electrical safety.
Po
we
rline
ope
r
ated
equipment or accessories connected to
this unit should bear the UL listing mark of CSA
certification mark on the
accessory
itself
and shou
ld
not be modified so as to defeat the safety
fea
tures.
This
will
help
avoid any
potential hazard
from
electrical shock or fire. If in doubt, contact qualified
service personnel.
12.
A
ccess
o
r
ie
s
-
Do not place
th
is
video
equipment on an unstabl
e
cart, stand, tripod, or table. The
video
equipment may fall, causing
serious
damage
to the video
product. Use this
video
pr
oduct
only with a cart, stand,
t
r
ipod,
bracket, or table
r
eco
mm
ended
by
t
h
e
manufacturer or sold with the
video
product. Any
mounting of the product should
f
o
ll
o
w the
manufacturer’s instructions and use a mounting
accessory
r
eco
mmended by the manufactur
er
.
Features
•
HD
CMOS
Progressive Scan
•
720p or 1080p models with
real-time
(25/30
fps)
•
3Mega Pixel 2048x1536 or 5 Mega Pixel 2592x1920 Models
•
Triple-streaming
(H.264/MJPEG)
•
Future proof
ONVIF 2.1
compliance
(1.02
backwards
c
o
mpatibl
e)
•
Compatible with popular third party
VMS
softwar
e*
•
Power-over-Ethernet
(PoE)
operation,
14Watt max/12V
operation
•
Backup options: micro SD
c
a
r
d
, FTP, NAS,
l
o
c
a
l
•
Mobile Apps: iPhone®, iPad®, Android™
•
Supports two-way audio
•
Simple ins
t
a
llation and adjustment
•
2.8-12mm vari-focal
l
e
ns
•
30 ft. (9m) IR Night
Vision,
T
r
ue
Day/Night (TDN)
•
IP66
Weatherproof and IK5
Vandal
Resistant
•
Multi-browser support:
IE,
Firefox, Safari, Chrome
•
3-axis gimbal
for versatile mounting
*
Check Onvif compliance on for your software.
General
Precautions
1. All warnings and instructions in this manual should be
f
o
ll
owed.
2.
Remove
the plug from the outlet before cleaning.
Do
not use liquid aerosol detergents.
Use
a
water
dampened
cloth for cleaning.
3.
Keep
enough
space
around the unit for ventilation. Slots and openings in the
s
t
o
r
age
cabinet
should not be blocked.
4. During lightning storms, or when the unit is not used for a
l
ong
time, disconnect the
po
wer
supply, antenna, and cables to protect the unit from electrical
sur
ge.
FCC CLASS A
NOTICE
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
ha
rmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the manu
facturer’
s
instruction manual, may
cause
harmful interference with radio communications.
Operation
of this
eq
uipment
in a residentia
l
a
r
ea
is likely to cause harmful interference, in which case you will be required to correct
th
e
interference at your own expense.
This
equipment
has been
certified
and
found to comply with the limits regulated
by FCC, EMC,
and
LVD.
Therefore, it is
designated
to
provide
reasonable protection against interference
and
will not
cause
interference with other appliance usage.
However,
it is imperative that the user follows the guidelines in this manual to
avoid
improper
usage which may result in damage to the unit, electrical shock and fire hazard injury.
In order to improve the feature functions
and
quality of this product, the specifications are
subje
ct
to
change
without notice from time to time.
6.7.7 BNC Video
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
30
6.7.8
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
30
6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
6.8.1
Disk Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
31
6.8.2
Motion Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
32
6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
6.9.1
Record Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
34
6.9.2
Record Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
39
6.10
Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
6.11
Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
6.11.1
DDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
42
6.12 Service
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
6.12.1 SMTP
(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
43
6.13
Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44
6.13.1
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
45
6.13.2
User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
46
6.13.3
Unlocking User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
47
6.14
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
6.14.1
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
48
6.15 Device
Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
6.16
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
6.17
Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
6.17.1
Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
50
6.17.2
Shutter Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
50
6.17.3 Gain
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
51
6.17.4
Day/Night Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
51
6.17.5
Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
52
6.17.6
Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
52
6.17.7 AE
Meter
Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
53
6.17.8 WB
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
53
6.17.9
WDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
54
6.17.10
Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
55
6.17.11
Noise Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
55
7.
Resetting
to
Factory
Defaults . . . . . . . . . . . . . . . . . . . 56
8.
Dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
9.
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TABLE OF
CONTENTS
1.
Getting
Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 1
1.1 Default Camera Username, Password, and Ports . . . . . . . . . .
.
1
1.2 Camera Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
2
1.2.1
Connection Overview . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
1.3
ONVIF
Compatibility and Included Software Overview . . . . . . .
.
3
1.3.2
NVMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1.3.3 CD Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
2.
Connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
Camera
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.
Finding
the
Camera’s
IP
Address
. . . . . . . . . . . . . . . . . . 6
4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . .
.
7
4.2 Finding the Camera’s IP Address using
UPnP
in Windows® 7. .
7
4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®
8
4.4 Finding the Camera IP using the BNC Test Cable . . . . . . . . . . .
.
9
5.
Configuring Remote
Connection
. . . . . . . . . . . . . . . . . . 10
5.1
Connecting
to a
DDNS
address using NVMS . . . . . . . . . . . . . .
.
13
6.
Web Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
15
6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .
.
15
6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
16
6.4
Web
Interface/Live
Video Overview
. . . . . . . . . . . . . . . . . . . . . .
.
19
6.4.1
Live
Video
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
6.4.2
Configuring Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
6.5
Device
Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
21
6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
22
6.7
Device
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
23
6.7.1
Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
6.7.2 Device
Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
6.7.3
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
6.7.4
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
6.7.5
OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
6.7.6
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
1 2
1.
GETTING
STARTED
The
system comes with the following
components:
•
1 x Camera
•
1 x DC IRIS connector
•
1 x Adapter ring
•
1 x
RJ45
Coupler
•
1 x Quick Start Guide
•
1 x Instruction Manual
•
1 x Top mounting pack
•
1 x Software/Documentation CD
RJ45
Coupler
1.1
Default Camera Username, Password, and
Ports
Username: admin
Password: admin
Ports: 80
(HTTP),
30001
(Control/Streaming), 8080
(RTMP),
554 (RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once
you
have
completed the basic setup of the camera, it is
r
e
c
o
mmended
t
o
configure
a
static
IP
addr
es
s. This
will
pr
ev
ent the
c
a
mer
a
IP address changing in the
event
of a power failure. For details,
see
“6.7.1
Local Network” on page 24.
1.2
Camera
Overview
Interface
Connection
Network interface
RJ45 Interface. PoE socket
Audio input
Connect to audio input device, such as tone alarm
Audio Output
Connect to acoustics device, such as speaker etc. for audio
speech output(impedance: >16Ω)
Power (DC12V)
Camera Power if not using PoE
Alarm output
(COM OUT)
Connect to alarm output, 1 channel on-off parameter(the
connected power must be within range of DC12V and 300mA)
Alarm (COM IN)
Alarm input, 1 channel signal alarm
（
0~DC12V
）
RS-485 interface
Connect to RS-485 device, such as Pan/Tilt, PTZ etc.
SD card socket
Insert SD card for local storage
Video Output Service Video Setup / IP setting info., standard BNC interface
RESET RESET button, restore ex-factory value. Hold for 5 seconds.
*microSD card slot (max. 64GB supported; recommend SanDisk™/Kingston™
DC IRIS
1
Control +
2
Control -
3
Drive -
4
Drive +
3 4
1.3
ONVIF Compatibility and Included Software
Overview
This camera is
ONVIF v2.1
compliant. It is designed for interoperability
with
popular
VMS’s and NVR’s*,
with backwards compatibility to
ONVIF v.1.02.
For
more information on
ONVIF,
visit www
.onvif
.or
g
NOTE:
Provided software is
PC
compatible only; Mac
OS® access
to the
cameras is available via Safari® browser only.
1.3.1
NVMS
•
NVMS
is a
client-only solution
that
supports up
to 36 IP
cameras.
NVMS
is a free software provided on the CD.
•
NVMS
supports all the features of the camera. It
can access
microSD/
SD
card recordings and camera setup over a local network.
•
NVMS
manual is provided on the
CD.
1.3.2 CD Tools
•
CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway
NTP Service Tool ; Time Sync Application: IP devices match one PC system time.
FTPUpdater ; Firmware Update tool
IP Support Help Files ; Website support help documents for common problems.
RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help ; documents on Onvif specifications
Open the NTP service ; Windows XP only enables NTP time to be enabled.
Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices
NVMS_Install.exe ; NVR Software installation for PC
NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software
SNMedia_Player.exe ; File Player for recorded files / backup files from devices /
NVMS.
1.2.1 Connection Overview
Camera mounting is made using standard 1/20” UNC at base of camera.
Included with product is top side connection for hanging installations where
bracket is desired to be connected to the top of the camera housing.
5 6
3.
CAMERA
INSTALLATION
Make
sure to follow the correct polarity if connecting
the camera to
DC
power. Polarity is marked on the
power connector.
1.
Box Camera requires only the
correct mounting to be applied
to the camera
Standard installation can be from bottom
Or can be made from the top of camera/
2.
Use
the included connection
to attach the bottom
installation connections block,
using the provided small
screws to attach to base of
camera.
3.
Connect camera Lens, use the
BNC connector for a fast live
video output view to adjust and
focus camera.
4.
Optional use the back focus
adjustment Ring if required to fit
lens so focus position is correct.
Connection
2. CONNECTION
Alarm input connection as below diagram
:
（-）GND
（+）DC5-12V
Alarm output is in on-off (No voltage), outside power is needed while connection alarm.
Outside power must be within DC12V and 300mA while connection DC power.
1.
RJ45
Network
Interface:
Connect
to a
router
or switch on your network
using
RJ45
Ethernet cable
(Cat5e
or better).
100Mhz
connection. PoE
supported (class 3
PoE
switch
r
e
quir
ed).
2.
Audio Input (3.5mm):
Connect
to a self-powered microphone
for lis
t
en-
in
audio.
3.
Audio Output (3.5mm):
Connect
to an amplifier or self-powered speaker
f
o
r
intercom/2-way audio.
4.
DC12V (1A):
12V DC
power input terminal. Make sure to
f
o
ll
ow c
o
rr
ect
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
450mA
/
5.4W.
7 8
4. Click on a camera IP address in
Device
List to
l
o
gin.
5. Under
User Name
,
enter the user name
for
the camera (default: admin).
Under
Password
,
enter the password
for
the camera (default: admin).
Click Continue.
Enter C
amera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click C
ontinue to login
6.
The
camera appears under the camera IP address. Click and drag the
cam
era to the display grid to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE:
For detailed instructions on using
NVMS,
see the NVMS
manual on the CD.
4.2
Finding
the
Camera’s
IP
Address using UPnP
in
Windows®
7
NOTE:
To use
this method, your
router
must support
UPnP and
the
c
a
mer
a
and
computer must
be
on
the
same
network.
UPnP
is enabl
ed
in
the
c
a
mer
a
by
default,
and c
a
n
be
enabled/disabl
ed
using
NVMS (check
the NVMS
manual
for details).
4.
FINDING THE CAMERA’S
IP ADDRESS
Use
the steps below to find the camera’s IP address and connect to the
camera over the local area network
(LAN)
using
NVMS, UPnP
on
Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
the
Camera’s
IP
Address Using
NVMS
1. Install
NVMS
from the
CD. Now
Doubl
e-click
the
NVMS
icon
(
) on the
Desktop.
The
l
o
g
in screen
appears.
2. Under User Name and
Password
,
enter the default
NVMS
user name
(
admin
)
and password
(
admin
).
Click Login.
Enter A
dmin
Enter Admin
Click Logi
n
3.
NVMS
opens and scans the
l
o
c
a
l
network
for
connected
c
a
mer
as.
Detected camera IP addresses on the LAN appear in the
Device
List on
the
left
side of the screen with a icon.
Found
camera
IP address
9 10
2. Click
Bonjour
. The
camera’s IP address appears in the Bonjour Devices
list.
3. Double-click the camera to open it in
Saf
ari®.
Bookmarks
button
Bonjour
Double-click the camera’s IP address
4. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click
Login
.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.4
Finding
the
Camera
IP
using
the
BNC Test
Cable
When
the
BNC
test
cable
is
connected
to the camera, the
IP address
is shown
on the test monitor.
The
camera must
be connected
to power to use the BNC
test cable.
NOTE:
The
default IP address of
192.168.0.129
is shown if the
c
a
mer
a
cannot obtain an IP address from the
router.
Check
the Ethernet/power
connections and
router
c
o
nfigur
ation.
1. Click
Start>Computer>Network
.
The
camera’s IP address appears
under Network
Infr
as
tructur
e.
Double-click to open
the camera
Network
2. D
ouble-click the camera to open it in your default browser.
3. Under User Name and
Password
,
enter the camera’s User Name
(default:
admin
)
and Password (default:
admin
)
and click
Login
.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.3
Finding
the
Camera’s
IP
Address using
Bonjour
®
in
Mac
OS®
NOTE:
To use
this method, the camera
and
computer must
be on
the same
network. Bonjour® is enabled by default, and can be enabled/disabl
ed
using
NVMS
(check the
NVMS
manual
for details).
1.
Open
Safari® browser and click the Bookmarks button ( ).
11 12
Configuring Connection
Step
3 of 6:
Locate your camera’s MAC
address:
1.
Open
a web browser and enter the camera’s IP address in the address
bar in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.129:80
IP
address
Colon
HTTP
port number
2. Under User Name and
Password
,
enter the camera’s User Name
(default:
admin
)
and Password (default:
admin
)
and click
Login
.
3. Click
Device Info
and write down the
MAC
Address.
MAC
Address
Step
4 of 6:
Register
for DDNS:
Register for one of the DDNS
services which are currently supported for use
with your IP camera. A DDNS account allows
you
to set up
a web
site
address
that points back to your local network.
The
following outlines how to
set up your free
DDNS
account.
NOTE:
Y
our router
must support
UPnP
to enable DDNS.
NOTE:
You
may use the same
DDNS
account
for
multiple IP cameras on
the same LAN.
Configuring Connection
5. CONFIGURING REMOTE
CONNECTION
Follow the steps below to configure your camera for connections over the
Internet using a web browser,
NVMS,
or other
VMS
software.
Step
1 of 6:
Locate
the
camera’s local
IP address:
•
See
“4. Finding the Camera’s IP Address” on
page 6
.
Step
2 of 6: Port
Forward your
router:
You
need to enable port forwarding for the following ports on your router to
the camera’s local IP address:
•
HTTP
Port (default: 80)
•
Control Port (default: 30001)
NOTE:
If you are configuring multiple IP cameras
for
individual
r
e
mot
e
access, you
must
change
the ports
for
each
camera.
Two
cameras cannot
use the same port number
.
NOTE:
Port forwarding the
RTSP
and
RTMP
ports is not
necessary
unl
es
s
your installation has special
r
e
quir
ements.
There are two methods for port forwarding:
•
You
can
manually port forward your router.
See yo
ur
router’s user manual
for details. An example of a port forwarding screen is shown below.
HTTP
80 80
100
Control
30001
30001
100
13 14
Configuring Connection
5.1
Connecting
to a
DDNS address using
NVMS
NOTE:
Complete all the steps
above
before performing the
f
o
ll
owing
method.
1.
Open NVMS
and click
Device
Manager>Video
Device
Manager.
2. Click
Manager
. The Device Maintenance
window opens.
Enter t
he
camera’s
DDNS
address
Control
Port
Click Add Click Save
3. Under
Device
IP, enter the
Domain
Name from the confirmation email.
For example, enter
mycamera
.dyndns,org
.
4. Under
Control
Port, enter the camera’s control port (default: 30001).
5.
(Optional)
Under
Device Name
,
enter a name
for
the
c
a
mer
a.
6. Click
Add
to add the camera to the
Device
Lis
t.
7. Click
Save
to
save changes.
Click OK.
Configuring Connection
Step
5 of 6:
Enable DDNS on
the camera:
1. Ent
er the camera’s IP address in your web browser. Log in and then
click
Network
Servic
e>DDNS
.
2.
Check
Enable
DDNS.
3. Configure the
f
o
ll
owing:
•
Provider:
Select the ddns service you use..
•
Domain Name:
Enter the
Domain
Name you received from the
c
onfirmation email you received after you created your
DDNS
account
(e.g.
mycamera.dyndns.org
).
•
User Name:
Enter the
User
Name
.
•
Password:
Enter the account name
Password
4. Click
OK
to
save
settings.
Step
6 of 6:
Connect
to the
camera’s DDNS
address:
1. Enter the camera’s
DDNS
address in your web browser in the
f
o
ll
owing
fo
r
m
a
t
:
http://
http://
mycamera.dyndns.org
:
80
Colon
DDNS
address
HTTP
port number
2. Under User Name and
Password
,
enter the camera’s User Name
(default:
admin
)
and Password (default:
admin
)
and click
Login
.
Once
you
have
logged into your system using your
DDNS
address, you can
connect to the IP camera from a remote location using a web browser,
NVMS
.
15 16
Configuration
6.
WEB
CONFIGURATION
The
camera includes a built-in web interface that can be
accessed
using a
web browser.
6.1
Supported
Browsers
•
Google
Chrome, Mozilla Firefox, and Apple Safari®
(via Adobe
Flash
Player)
•
Microsoft Internet Explorer®
7.0
or later, 32-bit version
(via
ActiveX®)
6.2
Chrome, Firefox, and
Safari Setup
1.
Connect
the camera to your
l
o
c
a
l
network and find the camera’s IP
address.
See
“4. Finding the Camera’s IP Address” on
page
7.
2.
Open
your browser and enter the camera’s IP address in the address bar
in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.129:80
Colon
Camera IP address
HTTP
port number
NOTE:
You
can also connect to the camera using a
DDNS
address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on
page
10
for
det
a
ils).
3. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Configuring Connection
8.
Close Device Maintenance
and
Device Manager,
and
return
to the
Liv
e
Video
screen.
The
newly
added
camera will appear in
Device
Lis
t.
Found
camera
NOTE:
A icon is shown
for
all cameras outside of the LAN. This does
not affect your ability to connect to the camera
r
e
motel
y
.
9. Click on the camera in
Device
List to
l
o
gin. Enter the
User Name
(def
ault:
admin
)
and
Password
(default:
admin
)
and then click Continue.
Enter C
amera User Name (default: admin)
Enter Camera Password (default: admin)
Click C
ontinue
10.Click and drag the camera to a display grid screen to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE:
For detailed instructions on using
NVMS,
see the NVMS
manual on the CD.
17 18
Configuration
3. Under
Download unsigned ActiveX controls
,
click Prompt
(recommended) or Enable.
Select Enable or Prompt under
Download
unsigned
ActiveX
controls
Click
OK
4. Click
OK
.
Click
OK
again to
save
changes.
Step
2 of 2:
Log into
camera:
1.
Connect
the camera to your
l
o
c
a
l
network and find the camera’s
IP
address.
See
“4. Finding the Camera’s IP Address” on
page 7.
2. Enter the camera’s IP address in the address bar in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.129:80
IP address
Colon
HTTP
port number
NOTE:
You
can also connect to the camera using a
DDNS
address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on
page
10
for
det
a
ils).
3. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Configuration
4.
The
main screen
for
the camera web interface
opens.
From here you can
view and configure the
c
a
mer
a.
NOTE:
If
you
do not
see video
from the camera, make sure your
c
o
mputer
has the latest
v
e
r
s
ion of
Adobe
Flash Player ins
t
a
ll
ed
(visit
http://
www.adobe.com/ to download the latest version). After installing Flash
Player, restart your browser and reconnect to the camera.
6.3 Internet Explorer® Setup
Step
1 of 2:
Change
Internet
Explorer security settings
for ActiveX®:
1.
Open
Internet Explorer and open the Security tab.
•
Internet Explorer 8: Click
Tools
>
Internet
Options
and select the
Security
tab.
•
Internet
Explorer 9:
Click
>
Internet
Options
and
select the Security
tab.
2. Click
Custom
Level.
Click C
ustom level
19 20
Configuration
6.4
Web
Interface/Live
Video
Overview
Camera
configuration
menus
Click and drag to zoom in. Right-click and
select
ZoomOut
to zoom out.
Double-click inside window for
full-screen
Select Stream
TIP:
Select stream2 for better performance for remote
connections. Stream2 has a lower resolution than stream1.
The
Live
video page
appears when you log into the camera. Live video
requires an ActiveX® plug-in or
Adobe
Flash Player.
6.4.1 Live Video
Menu
You
can
right-click
on the live
video
area to bring up the Live
Video
Menu.
Right-cl
ick on the
video
area to
open the Live
Video
Menu
Configuration
4. If your computer has Flash Player ins
t
a
ll
ed,
the main screen
for the
camera web interface
opens.
From here you can view and configure the
ca
m
e
ra
.
NOTE:
The ActiveX
plug-in
may
provide smoother
video
performance than
Flash Player.
To
use
ActiveX,
click the
message above
the
video
window.
Then
click inside the
video area,
select
Install
this Add-on for
all
users
on
this computer
,
and follow the prompts.
Install
ActiveX
plug-in
NOTE:
If your computer
does
not
have
Flash Player ins
t
a
ll
ed,
you will be
prompted
t
o
select if
y
o
u would like
t
o
use Activ
eX
or Flash
Play
er
t
o
connect
to the
ca
m
e
ra:
•
Click
to
play
live
video
with
ActiveX control
to
reduce
latency
(recommended):
Uses
an
ActiveX
plug-in to connect to the camera. To
install the plug-in, click on the
video
area,
and
select Install
this
Add-on
for all
users on this computer
,
and follow the prompts.
•
Click
to
download
the latest
version
of
Flash
Player to
play
live video:
Opens
a link to download Flash Player from
Adobe’s
website.
After
completing the installation, restart your browser and reconnect to the
c
amera.
Select
ActiveX
or Flash Player
21 22
Configuration
6.5
Device
Info
The Device
Info
page
shows information about your IP camera, such as the
Device
Name (which appears in the
Device
List in
NVMS),
firmware
version,
MAC
address, and camera inputs and outputs.
You
can also
configure the
Device
Name for your camera.
ATTENTION:
The device
ID is unique.
Do
not
change
it unless your
installation has special requirements.
To configure
the
Device
Name:
1. Click
Device
Info.
2. Under
Device Name
,
enter the desired
device
name and then click Set.
Configuration
The Live Video Menu contains
the
following
options:
•
Full
Screen:
Open
the
video
in full screen. Press
ESC
to exit full
sc
reen.
•
Sensor Config:
Configure the camera sensor settings.
See
“6.17 Sensor
Configuration” on
page 49.
•
ZoomIn:
Zoom in one level.
•
ZoomOut:
Zoom out one level.
•
Restore Panorama:
Zoom out all the way.
6.4.2 Configuring Camera Settings
•
Click the options
on
the left to configure camera settings. Setting options
are detailed in the remainder of this section.
Click t
o select
camera menus
TIP:
Some
sub-menus
have
a Reset button. This button will reset the
sub-menu options to factory defaults.
You
then
have
to click
OK
to save
changes.
23 24
Configuration
•
Frame
Rate:
Select the frame rate for the stream up to maximum of
30FPS
for stream1 or stream2 or
12FPS
for stream3.
NOTE:
Frame rate ma
y
be a
utoma
t
ical
l
y
adjusted
to
ac
c
o
un
t
f
o
r
bandwidth
limitations.
•
I Frame interval: Select the interval for I frames: 1, 2, or 3.
The
default
value of 2 should be used unless there are special requirements.
The
I
Frame interval
does
not apply to stream3.
•
Bit Rate:
For stream1 or stream2, select
CBR
(Constant
Bit
Rate)
or VBR
(Variable
Bit
Rate).
Enter the desired bit rate below in
kbps.
Stream3 only
supports VBR.
•
Quality:
Select the
video
quality between 1 (lowest) and 9 (highest).
TIP:
A quality of 7 provides a
good
picture. It is not recommended to set a
high quality value with a small
VBR
bit rate.
3. Click
OK
to apply changes.
6.7
Device
Configuration
Device
Configuration contains the following sub-menus:
•
Local Network
•
Device
Port
•
Camera
•
Date & Time
•
OSD
•
Microphone
•
BNC Video
Output
•
Language
•
Multicast (Not supported)
•
Dome
PTZ
(Not supported)
Configuration
6.6
Stream
Configuration
The
Stream Configuration
page
allows you to configure the camera’s video
streams.
The
camera supports three different
video
streams. This allows
you
to
have a
high quality recording stream (stream1),
a
lower quality stream
(stream2) to preserve bandwidth for remote connections, and an MJPEG
stream for applications requiring MJPEG.
To configure video streaming
settings:
1. Click Stream
Configuration
.
Under Stream ID, select the stream you
would like to
c
o
nfigur
e.
2. Configure the
f
o
ll
owing:
•
Video Encode Type:
Select the
Video Encoding
type for the stream.
Stream1 and stream2 can be configured for
H.264 High
Profile, H.264
Main
Profile, or
H.264 Base
Profile. Stream3 supports
MJPEG
only.
•
Audio Encode Type:
Select the Audio
Encoding
type for the
stream:
G711_ALAW
,
G711_ULAW
,
or RAW_PCM.
•
Resolution:
Select the resolution for the stream. Stream1 and stream3
can
be
set to
1920x1080
or
640x360
. Stream2
can only
be
set to 640x360.
Stream3 can only be set to 1920x1080.
25 26
Configuration
4. Clic
k
OK
to
save changes. The
camera will
restart
with the new IP
address.
6.7.2 Device
Port
The Device
Port
page (
Device
Configuration>Device
Port) allows you to
configure the camera’s port configuration.
The
camera has the following
ports:
•
Control
port:
The
default is
30001.
Enables
video
streaming.
•
HTTP Port:
The
default is
80. Enables web access. Please
note that if the
HTTP
is port is anything other than
80, you
must enter http:// before the
c
amera’s
IP address and
colon
(:) and
the
HTTP
port after the
IP
address
when connecting using an Internet browser
(e.g.
if the
HTTP
port is 85,
enter http://192.168.x.x:85).
•
RTSP
Port: Default is
554. Only
used for special applications
requiring
RTSP
streaming, such as VLC player or quicktime movie.
•
RTMP
Port: Default is
8080. Only
used for special applications.
NOTE:
If you are configuring multiple IP cameras
for
individual
r
e
mot
e
access
(without an
NVR
or server),
you
must
change
all the ports
for
each
camera.
Two
cameras cannot use the same port number
.
To change camera
ports:
1. Configure the camera ports as required and then click OK.
2. Click
Device
Configuration>Device
Port.
Configuration
6.7.1 Local
Network
The
Local Network
page
shows the camera’s current IP address and
network parameters if
DHCP
is enabled. It also allows you to set a static IP
address for the camera
(see
below), set the networking parameters, and to
select
IPv4
or IPv6.
NOTE:
DHCP
is dis
abled by
default.
When DHCP
is
enabled,
the
IP
address
is shown under
DHCP
IP.
Use the IPScan tool on CD
to configure a static
IP address. This
will
prevent the camera IP address changing in the event
of a power
f
a
ilur
e.
To configure
the
camera’s networking
parameters:
1. Click
Device
Configuration>Local
Network.
2. Under IP
Protocol
,
select
IPv4
or
IPv6
.
If
you
would like to use
IPv6,
mak
e
sure it is supported on your network.
You
may need to contact
y
o
ur
network administrator or
ISP
for
details.
3. Select
Device obtain an
IP
address automatically
to use
DHCP
or Device
use
the
following
IP
address
to set a static IP address
for
the camera.
If
you are using a static IP address, configure the
f
o
ll
owing:
•
IP
Address:
Enter the IP address
you
would like to assign to the camera.
Make sure the IP address is available on your network.
•
Subnet Mask:
Enter the subnet mask.
•
Preferred
DNS
Server/Alternate
DNS
Server: Enter desired DNS
servers.
27 28
Configuration
You can
set the
camera’s date and
time the
following
ways:
•
Using an
NTP
server (recommended)
•
Using your computer’s system
time
•
Manually
The
camera is configured to use
NTP
by default, but you
must set the time
zone
and Daylight
Savings
Time settings
to ensure accurate time. After a power failure, the camera
is configured to
connect
to
an NTP
server
and
automatically
update the time when power is restored. If using another
method to set the camera clock, time must be manually
updated after a power
failure.
To
set the
camera’s date and
time
using an NTP
server:
1. Click
Device
Configuration>Date & Time.
2. Under
Time Zone
,
select your time zone.
3. If your region
observes
daylight
savings
time, check
Adjust clock
for
daylight saving
changes.
•
Under Start and
End
,
select the start and end times for daylight savings.
4. Next to Current
PC
Time, click Apply.
To sync
the
camera’s date and
time to
your computer’s system
time:
1. Click
Device
Configuration>Date & Time.
2. Un-check
Enable NTP
and click
Apply
at the bottom of the
scr
een.
3. Under
Time Zone
,
select your time zone.
4. If your region
observes
daylight
savings
time, check
Adjust clock
for
daylight saving
changes.
•
Under Start and
End
,
select the start and end times for daylight savings.
5. Click
Apply
next to Current Computer Time.
The
Current
Device
Time
updates.
To
set the
camera’s date and
time manually:
1. Click
Device
Configuration>Date & Time.
2. Under
Time Zone
,
select your time zone.
Configuration
6.7.3 Camera
The
Camera
page (
Device
Configuration>Camera
)
allows you to configure
the
Channel
Name, which appears on the camera
OSD
and the
video
system
frequency.
To change
the
Channel
Name:
•
Configure the
Channel Name
as
needed
and then click the Set button
next to Channel Name.
To change
the
video system
frequency:
•
Select the desired setting under
Video System
and then click the
Set
button next to Source Resolution.
6.7.4 Date & Time
The
Date & Time
page
allows you to configure the camera’s date and
time.
29 30
Configuration
•
Cus
tom:
Create
a
custom
OSD
message.
Enter the custom
OSD
text under
Custom
OSD.
Device
Name
Channel
ID
Channel
Name
Time
Custom
3. Enter the desired
Row
and
Column
for
enabled
OSD messages.
Text on
row 0 is shown at the top of the screen, and moves down as the
r
o
w
number increases. Text on column 0 is shown on the
left
side of the
sc
reen, and moves right as the column number increases.
Column
0
Column # increases
Row
0
Row
#
increases
4. Clic
k
OK
to update the camera OSD.
6.7.6
Microphone
Configuration
3. Un-check
Enable NTP
and click
Apply
at the bottom of the
scr
een.
4. If your region
observes
daylight
savings
time, check
Adjust clock
for
daylight saving
changes.
•
Under Start and
End
,
select the start and end times for daylight savings.
5. Click
Set Manually
,
and use the on-screen
c
a
l
e
ndar to set the time and
date.
6. Click
Apply
. The
camera updates to the newly entered
time.
6.7.5 OSD
The OSD page
allows you to configure the camera’s on-screen display text.
To configure
the
camera
OSD:
1. Click
Device
Configuration>OSD.
2.
Check
the following options to enable
OSD
te
xt:
•
Device Name:
Display the
Device
Name.
•
Channel
ID:
Show
the channel ID number.
•
Channel Name:
Show
the name of the channel set in the Camera menu.
•
Time:
Show
the date and time on the
OSD.
Select the desired date and
time format under
Time
Format.
31 32
Configuration
To change
the
language
for the
OSD and
email alarms:
1. Click
Device
Configuration>Language.
2. Under
Language
,
select the desired language then click
OK
to save
changes.
6.8 Alarm Configuration
Alarm Configuration contains the following sub-menus:
•
Disk
Alarm
•
Motion
Alarm
•
Alarm I/O (Not supported)
•
I/O Alarm Linkage (Not supported)
•
Alarm Setting (Not supported)
6.8.1 Disk
Alarm
The
Disk Alarm
page
allows
you
to configure alarms if there is an issue
with
the recording disk.
You
can configure a Disk Full Alarm or a Disk
Error
Alarm.
A
Disk Full Alarm triggers
an
alarm when the recording disk is full
or
exceeds
a certain percentage. A Disk Error Alarm triggers an alarm if
there
is an error
accessing
or writing to the recording disk.
Alarms can be
viewed
using the Alarm Manager in
NVMS (see
the
NVMS
manual on the
CD
for details).
To configure Disk
Alarms:
1. Click Alarm
Configuration>Disk
Alarm.
2.
Check
Disk
Full Alarm to enable Disk Full Alarms.
Configuration
Configure microphone settings for listen-in audio. Self-powered
microphone required (not included).
To configure microphone
settings:
1. Click
Device
Configuration>Microphone.
2.
Check
Enable Microphone
to enable listen-in audio or un-check
t
o
disabl
e.
3. Under
Microphone Volume
,
select the volume
for
the
micr
ophone
between 1~100.
4. Click
OK
to
save
changes.
6.7.7 BNC Video
Output
Under
BNC
Output
(
Device
Configuration>BNC
Ouput
),
select
On
to enable
analog output or
Off
to disable and click OK.
6.7.8
Language
Change
the
language
for the camera
OSD
display
(e.g.
time
and
date display)
and email alarms. Supported languages are English, Polish,
Russian,
and
Chinese.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Costar CCI5100 Owner's manual

Costar
Brand
Costar
Model
CCI5100
Category
Security cameras
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents