Arctic Sound P31X PACK User manual

Brand: Arctic Sound

Model: P31X PACK

Category: Mobile headsets

Type: User manual

Please make sure the battery has been fully charged and fully discharged at the first three times of use to ensure the best performance of

the battery. A normal charging process takes about 2 – 3 hours.

Batttery Charger PRO

Battery Charger PRO 4

Multifunction button

LED indicator

Volume +

Volume -

Mini USB charging port

Forward

Backward

Microphone

Function Diagram

Charging the Headset

Press the multifunction button for 3

seconds until the blue LED lights up

Press the multifunction button for 3

seconds until the red LED lights up

Switch on

Switch off

User Manual

Notebook

Switch the Headset On or Off

www.arctic.ac

IVT5.4

USB Bluetooth

Adapter Driver

Bedienungsanleitung: www.arctic.ac/fileadmin/p31x/manual_de.pdf

Manuel de l'utilisateur: www.arctic.ac/fileadmin/p31x/manual_fr.pdf

Manual del usuario: www.arctic.ac/fileadmin/p31x/manual_es.pdf

Manual do Utilizador: www.arctic.ac/fileadmin/p31x/manual_pt.pdf

Användarmanual: www.arctic.ac/fileadmin/p31x/manual_se.pdf

Návod pro uživatele: www.arctic.ac/fileadmin/p31x/manual_cz.pdf

Használati útmutató: www.arctic.ac/fileadmin/p31x/manual_hu.pdf

Instrukcja obsługi: www.arctic.ac/fileadmin/p31x/manual_pl.pdf

Gebruikershandleiding: www.arctic.ac/fileadmin/p31x/manual_nl.pdf

P311

USB Charging Cable

Protective Case

UD2 USB Bluetooth

Mini Adapter

USB Bluetooth

Adapter Driver

User Manual

Voice dialing:

Answer a call:

End a call:

Refuse a call:

Redial the last dialed number:

Switch the call between mobile

phone and headset:

1) In handsfree state, enable voice recognition function of your mobile phone.

2) Double press the multifunction button until you hear a beep prompt.

3) Say the name of the person you wish to call loudly.

Press once.

Press and hold for 2 seconds.

In call state, press and hold for 2 seconds.

To use P311 headset with the USB Bluetooth Mini Adapter, you must first install the software onto your computer.

A. Installing the software

Turn on your computer. Insert the driver software CD into your computer’s CD-ROM drive.

Make and Receive Calls

Installing the UD2 USB Bluetooth Mini Adapter

LED Indicators

Status

Charging

Battery full

Paring mode

Low battery

Indication

Red LED on

Red LED off

Blue LED flashes once every 7 seconds

Red and blue LED will flash alternately

Red LED flashes every 30 seconds / acoustic signal

Function Action

Make a call: Dial from your mobile phone’s keypad and press “Send” or “OK”.

Forward / Backward

Note: iPhone 4, iPhone 3GS, iPhone 3G, iPad, iPod touch (2nd generation), and iPod touch (4th generation) support pause, play,

stop, next track and previous track for AVRCP when running the latest version of the device software.

Music Controls

Adjust the volume

Play, pause, or stop music

1. Click Open folder to view files.

4. Click Next.

3. Choose Setup Language and click OK.

2. Click setup and the InstallShield Wizard will start.

B. Installing the Hardware

Simply connect the UD2 USB Bluetooth Mini Adapter to an available USB port of your computer after the installation of Bluetooth

application.

If it cannot be installed automatically, you have to follow the procedures below when Found New Hardware Wizard appears:

6. Click Change if you want BlueSoleil to be installed into a

different folder. Or just click Next to continue with the

installation procedure.

5. Select “I accept the terms in the license agreement”,

click Next.

8. Click Finish to exit the installation wizard.7. Click Install to begin the installation.

9. Click Yes to restart your system after installation.

1. Select whether you want Windows to connect to

Windows Update to search for software. If not,

click Next.

Example: Skype for Windows 7

1 . Connect the UD2 USB Bluetooth Mini Adapter to an available USB port of your computer after the installation of the Bluetooth software.

Using Your Headset with VoIP Applications

2. Select “Install the software automatically

(Recommended)” and click Next.

3. Click Finish.

2. Click on the icon located in the system tray and

select “Turn on Bluetooth” from the pop-up menu.

To activate the pairing mode on your P311, press the

multifunction button for 7 seconds until the red and

blue LED flash alternately.

Multifunction button

4. Double click on the orange ball to start / stop searching for

Bluetooth devices within range.

Right click on the P311 icon and select Pair.6. Double click on the P311 icon to search Bluetooth services.7.

To start the IVT BlueSoleil software, click the icon located in

the system tray. Select “Display Classic View” from the

pop-up menu.

10. 11.

8. 9.

Double click on the Bluetooth Headset and Microphone

service icon to initiate the connection. The application will

connect the headset to your PC (the icon will become

green).

Right click on the icon in the notification area on the

Windows taskbar and select Playback devices. In both the

Playback and Recording tabs, set Bluetooth SCO Audio as

the Default Device.

Under Audio settings, select your Bluetooth device from the

Microphone, Speakers and Ringing dropdown lists.

This step may need to be repeated after a restart of

Windows.

12. Check that your Skype audio settings are correctly

configured by calling the Echo / Sound Test Service

(Skype name:echo123)

*Undistorted CD sound quality can only be guaranteed by using the UD2 Bluetooth USB Mini Adapter from ARCTIC.

1. Follow steps # 1 to 7 from the section on Using your headset with VoIP Applications.

Listening and Sharing Digital Audio from Your PC*

Double click on the Bluetooth Advanced Audio service

icon to initiate the connection. The application will connect

the headset to your PC (the icon will become green).

Right click on the icon in the notification area on the

Windows taskbar and select Playback devices. In the

Playback tab, set Bluetooth AV Audio as the Default Device.

Using Your Headset with Mobile Phone

Connect up to 3 headsets to your computer by simply

repeating the steps # 1 to 3 above.

To activate the pairing mode on your P311, press the multifunction button for 7 seconds until the red and blue LED flash alternately.

Turn on Bluetooth on your phone and pair it with the headset

Example: Nokia N97 mini

Press Menu > Settings > Connectivity > Bluetooth > Bluetooth on > Paired devices > Options > New paired device > P311 > Passcode “0000”

Example: iPad / iPhone / iPod Touch

Press Settings > General > Bluetooth > Bluetooth on > P311 > Pair

Warranty

This ARCTIC product includes a 2-year limited warranty. For further information, please consult warranty.arctic.ac

Example: Motorola Milestone

Press Menu > Settings > Wireless & networks > Bluetooth settings > Bluetooth on > Scan for devices > P311 > Passkey “0000”

Precautions

Avoid extreme volume. Long term exposure to loud music may cause hearing damage.

The radio waves emitted by the headset and wireless transmitter can affect the operation of nearby electronics including medical devices.

Keep the unit in a cool, dry place.

*In some cases, the headset needs to be reconnected after switching off the iPad / iPhone / iPod:

Press Settings > General > Bluetooth > Not Connected

ARCTIC Switzerland

Huobstrasse 4, 8808 Pfäffi kon, Switzerland

www.arctic.ac

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language

in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of ARCTIC (HK)

Ltd. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect

or error in this manual or product.