Titan Fitness Plate-Loaded Linear Hack Squat Machine User manual

Brand: Titan Fitness

Model: Plate-Loaded Linear Hack Squat Machine

Type: User manual

Titan Fitness Plate-Loaded Linear Hack Squat Machine is a versatile piece of equipment designed to help you build lower body strength and power. Its linear motion allows for a natural squatting movement, reducing stress on the knees and back while targeting the quads, hamstrings, and glutes effectively. The adjustable carriage accommodates users of varying heights, while the weight plate holders enable customization of resistance to suit your fitness level. Whether you're a beginner or an experienced lifter, this machine offers a challenging and effective workout experience.

MPN(s): LRHCSQT_1-LRHCSQT_2

SKU(s): 401231

UPC(s): 840009216251

KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY

(1) 2

Rear Support Frame

(33) 2

Protective Casing

(2) 1

Center Base Frame

(34) 2

Φ28 Bearing

(3) 2

Carriage

(35) 1

Φ25 Plug

(4) 2

Pedal Adjustable Tube-outer

(36) 2

Hollow Sleeve

(5) 2

Pedal Adjustable Tube-Inner

(37) 1

Φ12.7 Bushing

(6) 2

Pedal Frame

(38) 2

Knob

(7) 2

Weight Plate Holder-Left

(39) 2

Rubber Cushion

(8) 2

Weight Plate Holder-Right

(40) 2

Pipe Sleeve 50*75

(9) 2

Backrest Tube

(41) 2

End Cap Φ48*2

(10) 2

Backrest Adjust Tube

(42) 2

End Cap 45*2

(11) 2

Backrest Adjust Bracket

(43) 2

End Cap 50*2

(12) 2

Handlebar Frame

(44) 1

End Cap 75*2

(13) 1

Support Frame

(45) 2

End Cap 20*40*2

(14) 1

Tilted Center Frame

(46) 2

End Cap 30*60*2

(15) 2

Front Base Frame

(47) 1

Flat Washer Φ10.6*Φ26*2

(16) 2

Bushing Φ50*0.8*252

(48) 1

Flat Washer Φ11*Φ34*3

(17) 2

Rotating Shaft

(49) 2

Flat Washer Φ9*Φ16*1.6

(18) 2

Double End Bolt Φ12.5*78

(50) 2

Spring Washer Φ8

(19) 2

Double End Bolt Φ12.5*90

(51) 2

Flat WasherΦ13.5*Φ24*2.5

(20) 2

Double End Bolt Φ12.5*120

(52) 2

Cross Recessed Pan Head Screw M4*6

(21) 1

Guide Rod

(53) 1

Screws M5*20

(22) 1

Strengthen Shaft Φ25*670

(54) 2

Pan Head, Allen Bolt M8*40

(23) 2

Torsional Spring Φ48*Φ2.8

(55) 1

Pan Head, Allen Bolt M10*20

(24) 2

Wheel Φ50*Φ28*44

(56) 2

Pan Head, Allen Bolt M8*35

(25) 2

Fixing Plate 150*50*4

(57) 1

Hex Bolt M12*70

(26) 2

Fixing Plate 154*75*4

(58) 2

Hex Bolt M12*95

(27) 2

Back Cushion

(59) 2

Hex Bolt M12*100

(28) 2

Seat Cushion

(60) 2

Hex Bolt M12*105

(29) 2

Φ25 Bushing

(61) 2

Nut M12

(30) 2

Handle Bar Grip Φ24*3*140

(62) 2

Thin Nut M12

(31) 2

Hollow Sleeve

(63) 2

Pan Head, Allen Bolt M8*25

(32) 1

Φ60 Rubber Bumper

STEP 1

1. Install the Seat Cushion (28) on the Carriage (3), using Hex Bolt M10*35 (56).

2. Remove the Allen Bolt M10*20(55) and Flat Washer Φ10.6*Φ26*2(47), loosen the Allen Bolt M10*20(55)

and Flat Washer Φ11*Φ34*3(48) a little, draw out the Guide Rod (21).

3. Assemble the Handlebar (12) and Torsional Spring (23). Refer to the following instructions.

4. Insert the Guide Rod (21) through the center of the Wheel on Carriage (3) into the bottom of Tilted Center

Frame (14), tighten the Pan Head, Allen Bolt M10*20(55) and Flat Washer Φ10.6*Φ26*2(47).

SPRING ASSEMBLY INSTRUCTION

1. Put the Handlebar (12) and Torsional Spring (23) through the Carriage (3), one end of the Torsional

Spring (23) goes into the Carriage (3) (as shown in figure 1).

2. Rotate the Handlebar (12) to the position shown in figure 2, then insert the other end of the Torsional

Spring (23) into the hole on Handle bar (12). Tighten the Allen Bolt M10*20(55) and Flat Washer

Φ11*Φ34*3(48).

STEP 2

1. Connect Rear Support Frame (1) and Center Base Frame (2), using Fixing Plate (25), Flat Washer

Φ13.5*Φ24*2.5(51), M12 Nut (61) and Hex Bolt M12*100(59)

2. Fixing the Tilted Center Frame (14) on the Rear Support Frame (1) and Front Base Frame (15), using Fixing

Plate (26), Flat Washer Φ13.5*Φ24*2.5(51), M12 Nut (61), Hex Bolt M12*95(58) and Hex Bolt

M12*105(60).

Tighten all bolts after stability adjustment.

STEP 3

1. Connect Backrest Tube (9) and Backrest Adjust Tube (10), using Flat Washer Φ13.5*Φ24*2.5(51), M12 Nut

(61) and Double End Bolt (20).

2. Connect Backrest Tube (9) and Carriage (3), using Rotating Shaft (17), Flat Washer Φ13.5*Φ24*2.5(51) and

M12 Nut (61).

3. Connect Backrest Adjust Bracket (11) and Carriage (3), using Rotating Shaft (17), Flat Washer

Φ13.5*Φ24*2.5(51) and M12 Nut (61).

STEP 4

1. Install the Pedal Adjustable Tube B (5) on the Pedal Frame (6), using Flat Washer Φ13.5*Φ24*2.5(51), M12

Nut (61) and Double End Bolt (19).

2. Connect the Pedal Frame (6) and Tilted Center Frame (14), using Flat Washer Φ13.5*Φ24*2.5(51), M12

Nut (61) and Double End Bolt (20).

3. Connect the Pedal Adjustable Tube A (4) and Tilted Center Frame (14), using Flat Washer

Φ13.5*Φ24*2.5(51), M12 Nut (61) and Double End Bolt (19).

STEP 5

1. Fixing the Strengthen Shaft (22) on the Right Weight Plate Holder (8), using Flat Washer Φ9*Φ16*1.6(49),

Φ8 Spring Washer (50), and Hex Bolt M8*40(54).

2. Through the Strengthen Shaft (22) into the hole of Carriage (3), then fixing the Right Weight Plate Holder

(8) on the Carriage (3), using Flat Washer Φ13.5*Φ24*2.5(51) Hex Bolt M12*70 (57).

3. Through the Strengthen Shaft (22) into the Left Weight Plate Holder (7), then fixing the Left Weight Plate

Holder (7) on the Carriage (3), using Flat Washer Φ13.5*Φ24*2.5(51) Hex Bolt M12*70 (57).

4. Fixing the Strengthen Shaft (22) on the Left Weight Plate Holder (7), using Flat Washer Φ9*Φ16*1.6(49),

Φ8 Spring Washer (50), and Hex Bolt M8*40(54).

STEP 6

Install the Back Cushion (27) on the Backrest Tube (9), using Hex Bolt M10*20(55).

This concludes the LRHCSQT Owner’s Manual.

If applicable to your product, make sure to tighten

all nut-and-bolt combinations before use.

Enjoy!

DISCLAIMER

This equipment must be used with care by capable and competent individuals under supervision, if necessary.

The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full

responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may

occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and

agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the

same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.

TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,

COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN

USE OF THE EQUIPMENT.

NEED HELP?

1 (800) 605-8241

info@titandistributorsinc.com /

Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)

Titan Fitness Plate-Loaded Linear Hack Squat Machine User manual

Titan Fitness Plate-Loaded Linear Hack Squat Machine User manual

Titan Fitness Plate-Loaded Linear Hack Squat Machine User manual

Related papers

Other documents