MPN(s): 16BRNBX, 30BRNBX, 47BRNBX
SKU(s): 899259, 899256, 899255
UPC(s): 840009216060, 840009215827, 840009215582
2
KEY BOX DESCRIPTION QTY
(1) 1
16” Lateral Plate
4
(2) 1
Top Plate
1
(3) 1
Bottom Plate 1
3
STEP 1
Connect the three Lateral Plates (1) end to end. Open the Lateral Plate (1) on both sides
outwards. Insert the Bottom Plate (3) into the slot on the Lateral Plate (1).
4
STEP 2
1. Insert the last Lateral Plate (1) into the slot on both side of Lateral Plate (1). And ensure
that the bottom plate (3) is not inserted into the bottom slot of the last lateral plate (1).
2. Then forcefully lift the last Lateral plate (1) and make it hook into the adjacent slot.
3. Press bottom plate (3) into the groove under the Lateral plate (1).
5
STEP 3
Cover the Top Plate (3).
6
SHOWN WITH 30-INCH PANNELS
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1
30” or 47” Lateral Plate 4 (6) 1 L-Shape Handle 2
(2) 1
Top Plate
1
(7)
1
Small Handle Tube
1
(3) 1
Bottom Plate
1
(8)
1
Bushing Φ20*Φ8.20*25
1
(4) 1
Support Plate
2
(9)
1
Butterfly Nut M8
1
(5) 1
Top Strengthening Plate
4
(10)
1
Carriage Bolt M8*40
1
7
STEP 1
1. Insert the Top Strengthening Plate (5) into the slot on the Top Plate (2), then Push them to
the side near the center.
2. Pass carriage bolt (10) through the side of Top Plate (2) completely, then pass Bushing (8)
through carriage bolt (10) with Butterfly Nut (9), do not tighten.
3. Insert the L-shape Handle (6) into the Small Handle tube (7), then install them on the slot of
Top Plate (2).
4. Push the Top Strengthening Plates (5) around to fix the handle. Finally, tighten the butterfly
nut (9).
8
STEP 2
1. After Support Plate (4) are cross fixed as shown in the figure, Place the Bottom plate (3)
on the fixed support plate (4).
2. Lift a Lateral plate (1) gently into the slot. Install other Lateral plates (1) in this way.
* SHOWN WITH 30-INCH
9
STEP 3
1. Insert the last Lateral Plate (1) into the slot on both side of Lateral Plate (1).
2. Then forcefully lift the last Lateral plate (1) and make it hook into the adjacent slot.
*
SHOWN WITH 30-INCH
10
STEP 4
Cover the Top Plate (3).
*
SHOWN WITH 30-INCH
11
This concludes the BRNBX Owner’s Manual.
If applicable to your product, make sure to tighten
all nut-and-bolt combinations before use.
Enjoy!
SHOWN WITH 30-INCH
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Titan Fitness Square Grip Stud Bar User manual
-
Titan Fitness T-2 Series Roller J-Hooks User manual
-
Titan Fitness 5 LB Pair Color Change Plates User manual
-
-
-
-
-
-
Gold's Gym XRT 75 User manual
-
NordicTrack NTSY59210 User manual