ENFORCER SS-078Q Installation guide

Brand
ENFORCER
Model
SS-078Q
Type
Installation guide

This manual is also suitable for

ENFORCER SS-078Q is a N.O. (push-to-close) hold-up button designed for activating security measures, such as cameras or alarms, in the event of an emergency. Its solid-state design enables silent operation or the connection to audible signaling devices. The unit features a highly reliable switch mechanism, a durable stainless steel housing, and a compact size for discreet placement. Once activated, the SS-078Q latches in and displays an indicator flag, aiding in identifying the triggered unit in multi-unit installations. It can only be reset with a key, ensuring authorized access.

ENFORCER SS-078Q is a N.O. (push-to-close) hold-up button designed for activating security measures, such as cameras or alarms, in the event of an emergency. Its solid-state design enables silent operation or the connection to audible signaling devices. The unit features a highly reliable switch mechanism, a durable stainless steel housing, and a compact size for discreet placement. Once activated, the SS-078Q latches in and displays an indicator flag, aiding in identifying the triggered unit in multi-unit installations. It can only be reset with a key, ensuring authorized access.

The ENFORCER SS-077Q and SS-078Q Hold-up Buttons are the perfect
units for activating hold-up circuits, cameras, etc. Because of its superior
construction and solid-state design, these units can be used for silent operation, or if you wish these units
can be conveniently connected to sound a bell, siren, or other signalling device when triggered. The highly
reliable switch mechanism ensures that these units will give you years and years of trouble-free operation.
Once activated, the SS-077Q and SS-078Q latch-in and an indicator flag will clearly show which hold-up
switch was depressed – a great help when more than one unit is used. The unit can only be reset by an
authorized person with the key.
Features
•
Highly reliable switch mechanism.
• Attractive, durable stainless steel housing.
• Compact size.
• High-security key reset.
• Use with either N.C. or N.O. input.
• Includes 2 keys. Spare keys also available,
Spare key model #: SS-078-KEY.
ENFORCER
®
SS-077Q – N.C. (push-to-open)
SS-078Q – N.O. (push-to-close)
Hold-up Buttons
SECO-LARMSECO-LARM
SECO-LARMSECO-LARM
SECO-LARM
®
U.S.A., Inc. U.S.A., Inc.
U.S.A., Inc. U.S.A., Inc.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1)
year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is
returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or
abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes
other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s option. In no event
shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one
of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is
also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written
permission of SECO-LARM.
PITSW1
Website: www.seco-larm.com
E-mail: sales
@
seco-larm.com
FILE: DT/DTP/MUSS077_78QZZ_1107.pmd
ORDER PART# 763-034-2%
Specifications
Model
Contact
Switch type
Switch rating
Terminal type
Mounting type
Size Case
Cover
SPST
12VDC @ 1 Amp.
Screws x 2
Surface
2
3
/
4
” x 2
1
/
4
” x 1
1
/
16
(70 x 56 x 27 mm)
Stainless Steel
NC, push-to-open
NO, push-to-close
SS-077Q
SS-078Q
Position magnet
here for N.C.
Position magnet
here for N.O.
SS-077Q SS-078Q
Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant.
  • Page 1 1

ENFORCER SS-078Q Installation guide

Brand
ENFORCER
Model
SS-078Q
Type
Installation guide
This manual is also suitable for

ENFORCER SS-078Q is a N.O. (push-to-close) hold-up button designed for activating security measures, such as cameras or alarms, in the event of an emergency. Its solid-state design enables silent operation or the connection to audible signaling devices. The unit features a highly reliable switch mechanism, a durable stainless steel housing, and a compact size for discreet placement. Once activated, the SS-078Q latches in and displays an indicator flag, aiding in identifying the triggered unit in multi-unit installations. It can only be reset with a key, ensuring authorized access.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents