Rubinet Faucet Company 1ARMLGDBK Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Rubinet Faucet Company 1ARMLGDBK

The Rubinet Faucet Company 1ARMLGDBK is a widespread lavatory set that comes with either a round handle or lever handle and is made of brass with a choice of 21 finishes. It features the following capabilities:

  • Quater turn Ceramic Disk cartridges for smooth operation and durability
  • 1.5 gpm @ 60 psi flow rate, which helps meet CalGreen regulations for water conservation
  • AB1953 /NSF 61, ASME A112.18.1, and CSA B125.

Rubinet Faucet Company 1ARMLGDBK

The Rubinet Faucet Company 1ARMLGDBK is a widespread lavatory set that comes with either a round handle or lever handle and is made of brass with a choice of 21 finishes. It features the following capabilities:

  • Quater turn Ceramic Disk cartridges for smooth operation and durability
  • 1.5 gpm @ 60 psi flow rate, which helps meet CalGreen regulations for water conservation
  • AB1953 /NSF 61, ASME A112.18.1, and CSA B125.
1AHOL
1AHOR
3 5/16"
84
5 1/2"
140
8"
203
2 1/4"
56
1 3/8"
35
1 3/8"
35
13 7/16"
342
3 5/16"
84
5 1/2"
140
8"
203
2 1/4"
56
1 3/8"
35
1 3/8"
35
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at:
905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com
FEATURES:
- Brass construction with choice of 21 nishes
- Two lever or round handles
- Quater turn Ceramic Disk cartridges
-- 1.5 gpm @ 60 psi (Helps meet CalGreen regulation)
APPROVAL:
- AB1953 / NSF61
- ASME A 112.18.1
- CSA B125.1
WIDESPREAD LAVATORY SET
ASSEMBLY INSTRUCTION 1AHOL or R
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living nishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
180710
Turn counter-clock
wise to unscrew.
AERATOR REMOVAL
Handle Mount
Flange Bushing
Align notch to the pin
Cap
Sleeve
Set screws
ROUND HANDLE INSTALLATION
Round Handle
Lever Handle
5
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
Turn Cartridge to
the off position
for handle alignment
Tighten valve nut and
connect water supplies
Handle Mount
Flange Bushing
Align notch to the pin
Cap
Sleeve
Set screws
ROUND HANDLE INSTALLATION
HOLE SIZE
Ø 1 3/8 ˝
Brass Nut
Brass Nut
Left (Hot)
Right (Cold)
Jig
Fiber
Fiber
Rubber
Rubber
* Adjust valve height using the JIG as shown
4 1
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
Connect hoses to the valve
Left-Hot, Right-Cold
Secure Spout with
mounting kit
Gasket
Threaded Rod
Flexhose
2 3
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
Connect hoses to the valve
Left-Hot, Right-Cold
Secure Spout with
mounting kit
Gasket
Threaded Rod
Flexhose
2 3
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
Turn Cartridge to
the off position
for handle alignment
Tighten valve nut and
connect water supplies
Handle Mount
Flange Bushing
Align notch to the pin
Cap
Sleeve
Set screws
ROUND HANDLE INSTALLATION
HOLE SIZE
Ø 1 3/8 ˝
Brass Nut
Brass Nut
Left (Hot)
Right (Cold)
Jig
Fiber
Fiber
Rubber
Rubber
* Adjust valve height using the JIG as shown
4 1
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
Turn counter-clock
wise to unscrew.
AERATOR REMOVAL
Handle Mount
Flange Bushing
Align notch to the pin
Cap
Sleeve
Set screws
ROUND HANDLE INSTALLATION
Round Handle
Lever Handle
5
WIDESPREAD LAVATORY SET 1AHOL or RWIDESPREAD LAVATORY SET 1AHOL or R
1AHOL
1AHOR
3 5/16"
84
5 1/2"
140
8"
203
2 1/4"
56
1 3/8"
35
1 3/8"
35
13 7/16"
342
3 5/16"
84
5 1/2"
140
8"
203
2 1/4"
56
1 3/8"
35
1 3/8"
35
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at:
905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com
FEATURES:
- Brass construction with choice of 21 nishes
- Two lever or round handles
- Quater turn Ceramic Disk cartridges
-- 1.5 gpm @ 60 psi (Helps meet CalGreen regulation)
APPROVAL:
- AB1953 / NSF61
- ASME A 112.18.1
- CSA B125.1
WIDESPREAD LAVATORY SET
ASSEMBLY INSTRUCTION 1AHOL or R
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living nishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
180710
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Rubinet Faucet Company 1ARMLGDBK Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Rubinet Faucet Company 1ARMLGDBK

The Rubinet Faucet Company 1ARMLGDBK is a widespread lavatory set that comes with either a round handle or lever handle and is made of brass with a choice of 21 finishes. It features the following capabilities:

  • Quater turn Ceramic Disk cartridges for smooth operation and durability
  • 1.5 gpm @ 60 psi flow rate, which helps meet CalGreen regulations for water conservation
  • AB1953 /NSF 61, ASME A112.18.1, and CSA B125.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI