American Standard 7881.732.002 User guide

American Standard
Brand
American Standard
Model
7881.732.002
Category
Faucets
Type
User guide

This manual is also suitable for

American Standard 7881.732.002 is a two-handle widespread lavatory faucet with a brass crescent spout.

American Standard 7881.732.002 is a two-handle widespread lavatory faucet with a brass crescent spout.

C63
© 2006 American Standard Inc.
HAMPTON
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH BRASS CRESCENT SPOUT
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges - reversible for use with either
lever or cross handles. Cast brass spout. One-half inch male
inlet shanks with brass coupling nuts. 20 inch (500mm) long
flexible stainless steel drain cable is pre-assembled to spout.
Metal Speed Connect™ drain body with 1-1/4 inch (32mm)
tail piece. 2.2 gpm/8.3L/min. maximum flow rate.
PRODUCT FEATURES:
Brass Construction:
Durable. Ideal for prolonged contact
with water. Provides the finest surface for application of colors
and finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect™ Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Exclusive Handle Alignment System: Allows fine tuning
of handle position.
Choice of Finishes: Wide range of durable finishes.
MODEL NUMBER:
7881.702 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Porcelain Cross handles.
7881.712 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Porcelain Lever handles.
7881.722 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Metal Cross handles.
7881.732 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Metal Lever handles.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with flexible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with cross or
lever handles. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model
#7881.___.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
59mm
(2-3/8)DIA.
152mm - 305mm
(6 TO 12)
FLEXIBLE
28mm
(1-1/8)
DIA.
35mm
(1-3/8)DIA.
MOUNTING
HOLES (3)
89mm
(3-1/2)
35mm
(1-3/8)
MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
FLEXIBLE
HOSE
FLEXIBLE
HOSE
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
133mm
(5-1/4)
60mm
(2-3/8)DIA.
7881.712 Shown
N/A = NOT AVAILABLE
90mm
(3-1/2)
121mm
(4-3/4)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
7881.702
Product
Number
Description
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Porcelain Cross handles.
7881.712
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Porcelain Lever handles.
7881.722
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain
.
Metal Cross handles.
7881.732
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Metal Lever handles.
Finish Options*
Polished
Chrome
P. Chrome
/PVD
Brass
Mix
002
299
PVD
Satin/
Brass
Mix
297
PVD
Satin
Nickel
295
PVD
Satin/
Chrome
Mix
221
PVD
Polished
Brass
099
PVD
Blackened
Bronze
068
N/AN/AN/A
N/AN/A N/A
N/AN/A
N/A
N/A
N/A N/A
*EverClean™ Finish:
• Offered on Polished Chrome (002), Polished Brass (099), and Satin Nickel (295).
(and any combination of these finishes)
• One wipe effortlessly removes spots.
• Eliminates the need for cleaners and scrubbing.
32mm OD
(1-1/4 OD)
C64
© 2006 American Standard Inc.
HAMPTON
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH BRASS CRESCENT SPOUT
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for 6"
to 12" (152mm to 305mm) installations. 1/4 turn washerless
ceramic disc valve cartridges - reversible for use with either
lever or cross handles. Cast brass spout. One-half inch male
inlet shanks with brass coupling nuts. 20 inch (500mm) long
flexible stainless steel drain cable is pre-assembled to spout.
Metal Speed Connect™ drain body with 1-1/4 inch (32mm)
tail piece. 2.2 gpm/8.3L/min. maximum flow rate.
PRODUCT FEATURES:
Brass Construction:
Durable. Ideal for prolonged contact
with water. Provides the finest surface for application of colors
and finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect™ Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Exclusive Handle Alignment System: Allows fine tuning
of handle position.
Choice of Finishes: Wide range of durable finishes.
MODEL NUMBER:
7881.702 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Porcelain Cross handles.
7881.712 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Porcelain Lever handles.
7881.722 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Metal Cross handles.
7881.732 Widespread Lavatory
Metal Speed Connect™ Pop-up drain.
Metal Lever handles.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with flexible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with cross or
lever handles. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model
#7881.___.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
59mm
(2-3/8)DIA.
152mm - 305mm
(6 TO 12)
FLEXIBLE
28mm
(1-1/8)
DIA.
35mm
(1-3/8)DIA.
MOUNTING
HOLES (3)
89mm
(3-1/2)
35mm
(1-3/8)
MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
FLEXIBLE
HOSE
FLEXIBLE
HOSE
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
133mm
(5-1/4)
60mm
(2-3/8)DIA.
7881.712 Shown
N/A = NOT AVAILABLE
90mm
(3-1/2)
121mm
(4-3/4)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
7881.702
Product
Number
Description
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Porcelain Cross handles.
7881.712
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Porcelain Lever handles.
7881.722
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain
.
Metal Cross handles.
7881.732
Lavatory faucet with
Metal Speed
Connect™ Pop-up drain.
Metal Lever handles.
Finish Options*
Polished
Chrome
P. Chrome
/PVD
Brass
Mix
002
299
PVD
Satin/
Brass
Mix
297
PVD
Satin
Nickel
295
PVD
Satin/
Chrome
Mix
221
PVD
Polished
Brass
099
PVD
Blackened
Bronze
068
N/AN/AN/A
N/AN/A N/A
N/AN/A
N/A
N/A
N/A N/A
*EverClean™ Finish:
• Offered on Polished Chrome (002), Polished Brass (099), and Satin Nickel (295).
(and any combination of these finishes)
• One wipe effortlessly removes spots.
• Eliminates the need for cleaners and scrubbing.
32mm OD
(1-1/4 OD)
  • Page 1 1
  • Page 2 2

American Standard 7881.732.002 User guide

American Standard
Brand
American Standard
Model
7881.732.002
Category
Faucets
Type
User guide
This manual is also suitable for

American Standard 7881.732.002 is a two-handle widespread lavatory faucet with a brass crescent spout.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents