Belkin PowerHouse F8J200 User manual

Brand: Belkin

Model: PowerHouse F8J200

Type: User manual

User Guide

Charging the Apple Watch® and iPhone® on the Belkin PowerHouse™

Charge Dock, F8J200

The Belkin PowerHouse™ Charge Dock for Apple Watch® + iPhone®, F8J200 charges the

Apple Watch and iPhone either together or separately at the same rate. Follow the steps below to

know how to charge your Apple Watch and iPhone on the Belkin PowerHouse™ Charge Dock.

NOTE: Make sure that the Belkin F8J200 is connected to a power source.

Charging the Apple Watch

Attach the back panel of the watch to the built-in Apple Watch Magnetic Charging Module.

NOTE: If the watch is placed upside down, the built-in Apple Watch Magnetic Charging Module will

still charge the watch.

The Apple Watch should be charged now.

Charging the iPhone

Step 1:

Adjust the dial on the charge dock.

Step 2:

Place the iPhone on the connector and lean it on the bar.

Step 3:

Secure a snug fit between the iPhone and the connector by adjusting the dial.

Your iPhone should now be charged.

Getting to know the Belkin PowerHouse™ Charge Dock for Apple Watch

+ iPhone, F8J200

The Belkin PowerHouse™ Charge Dock for Apple Watch + iPhone, F8J200 recharges and

displays your Apple Watch® and iPhone® at the same time. With its built-in Magnetic Charging

Module, this 2-in-1 PowerHouse Charge Dock holds and aligns the Apple Watch magnetically as it

begins charging instantly. Featuring a built-in VersaCase™ Lightning connector that can be

adjusted to fit almost any case, this dock simultaneously charges your iPhone at the fastest possible

speed.

Gray with White Base

Black

Specifications:

 Charges the Apple Watch and iPhone simultaneously or separately at the same rate

 Compatible with Belkin phone cases

 Supports up to 5 mm+ deep cases

 Total power of 3.4 A (1 A for Apple Watch, 2.4 A for iPhone)

 Cable Length of 1.2 m / 4 ft

Charging times:

 Apple Watch – charges 80 percent in 90 minutes,100 percent in 2 ½ hours

 iPhone – typically charges 80 percent in 90 minutes,100 percent in 2 hours (depending on

the model)

 Apple Watch + iPhone – charges 80 percent in 90 minutes, 100 percent in 2 ½ hours

Warranty:

 2-year limited warranty

Package inclusions:

 Belkin F8J200

 Power Supply (12 V, 1.5 A)

Compatible watches:

 Apple Watch Sport™

 Apple Watch Series 3

 Apple Watch Series 2

 Apple Watch Series 1

 Apple Watch Nike+

 Apple Watch Edition™

Compatible iPhone models:

 iPhone X

 iPhone SE

 iPhone 8 Plus

 iPhone 8

 iPhone 7 Plus

 iPhone 7

 iPhone 6s Plus

 iPhone 6s

 iPhone 6 Plus

 iPhone 6

 iPhone 5/5s

Belkin Valet™ and PowerHouse™ Charge Docks for Apple Watch +

iPhone, F8J183 and F8J200 Frequently Asked Questions

COMPATIBILITY

1. Are the current Belkin Valet™ and PowerHouse™ Charge Docks compatible with the new

iPhone® XS Max, XS, and XR?

No. The Belkin Valet and PowerHouse Charge Docks are only compatible with iPhone® 8, iPhone 8

Plus, iPhone X and previous iPhone with Lightning® connector models (iPhone 5 and later).

2. What devices are compatible with the Belkin Valet and PowerHouse Charge Docks for

Apple Watch + iPhone, F8J183 and F8J200?

The following devices are compatible with Belkin F8J183 and F8J200:

 All Apple Watch® models

 iPhone X

 iPhone SE

 iPhone 8/8 Plus

 iPhone 7/7 Plus

 iPhone 6 Plus/6s Plus

 iPhone 6/6s

 iPhone 5/5s

PRODUCT INFORMATION

1. What is the warranty of Belkin F8J183 and F8J200?

The Belkin F8J183 and F8J200 come with a 2-year hardware warranty.

2. What are the power adapter specifications of Belkin F8J183 and F8J200?

Input: 110 - 240 V 50/60 Hz

Output: 12 V / 1.6 A / 19.2 W

3. What are the charging rates of Belkin F8J183 and F8J200?

Lightning Port: 5 V / 2.4 A / 12 W

Watch Charging Pad: 5 V / 1 A / 5 W

4. What are the product features of the Belkin F8J183 and F8J200?

The Belkin F8J183 and F8J200 feature a magnetic charger for the Apple Watch and an

adjustable Lightning connector for the iPhone. The integrated chargers allow you to charge your Apple

Watch and iPhone simultaneously.

Below are the key features of the Belkin F8J183:

 Integrated magnetic charger for Apple Watch

 Adjustable Lightning connector that fits most cases

 Charges both Apple Watch and iPhone

 Power cable length: 1.5 m/4.9 ft

 2.4 A Fast Charging for iPhone

To learn more about the Belkin F8J183, click here.

Below are the key features of the Belkin F8J200:

 Charges the Apple Watch and iPhone simultaneously or separately at the same rate

 Compatible with Belkin phone cases

 Supports up to 5 mm+ deep cases

 Total power of 3.4 A (1 A for Apple Watch, 2.4 A for iPhone)

 Power cable length: 1.2 m/4 ft

To learn more about the Belkin F8J200, click here.

SETUP AND CONFIGURATION

1. How do I charge with the Belkin F8J183 and F8J200?

Charging is easy with the Belkin F8J183 and F8J200. Connect the Lightning cable to charge your

iPhone and attach your Apple Watch to the dedicated magnetic base.

2. Will the Belkin F8J183 and F8J200 still charge my Apple Watch® even if it is upside down?

Yes. It will charge even if you place your Apple Watch upside down (as opposed to what is shown in

the Quick Install Guide).

3. How do I know that my Apple® device has finished charging?

You may need to refer to the battery indicator of your Apple device connected to the charger to

make sure it’s charging and to know the device's battery level. The Belkin F8J183 and F8J200 don’t

have any light indicators.

4. Can the Belkin F8J183 and F8J200 charge my Apple Watch and iPhone separately?

Yes. They can charge your Apple devices separately or together.

Belkin PowerHouse F8J200 User manual

Belkin PowerHouse F8J200 User manual

Belkin PowerHouse F8J200 User manual

Related papers

Other documents