JUNG CD5234WW is a microprocessor-supported blind controller that can be placed into a 58 mm recessed box and is maintenance-free. It can control a motor with a maximum of 1000 VA connected load and limit switch. The device has 9 freely programmable memory registers for one "up" or one "down" time each. These times can be coordinated to any combination of weekdays. The blind controller has 4 operating modes:
- Manual mode The blind is controlled up and down via keys, the slats are continuously adjustable (touch operation).
- Automatic mode Programmed switching times are executed.
- Operation with random generator
JUNG CD5234WW is a microprocessor-supported blind controller that can be placed into a 58 mm recessed box and is maintenance-free. It can control a motor with a maximum of 1000 VA connected load and limit switch. The device has 9 freely programmable memory registers for one "up" or one "down" time each. These times can be coordinated to any combination of weekdays. The blind controller has 4 operating modes:
- Manual mode The blind is controlled up and down via keys, the slats are continuously adjustable (touch operation).
- Automatic mode Programmed switching times are executed.
- Operation with random generator
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
JUNG CD5234WW Operating instructions
- Type
- Operating instructions
JUNG CD5234WW is a microprocessor-supported blind controller that can be placed into a 58 mm recessed box and is maintenance-free. It can control a motor with a maximum of 1000 VA connected load and limit switch. The device has 9 freely programmable memory registers for one "up" or one "down" time each. These times can be coordinated to any combination of weekdays. The blind controller has 4 operating modes:
- Manual mode The blind is controlled up and down via keys, the slats are continuously adjustable (touch operation).
- Automatic mode Programmed switching times are executed.
- Operation with random generator
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: JUNG CD5234WW Mode d'emploi
- Deutsch: JUNG CD5234WW Bedienungsanleitung
Related papers
Other documents
-
Danfoss ECA 9018 User guide
-
ABB Controlpanel Operating Instructions Manual
-
Ecler MRP2 User manual
-
elero TempoTel 2 Operating Instructions Manual
-
iON Weekly Timer-WST Owner's manual
-
Intermatic talentosmartC25 User manual
-
Vestamatic Rolltec Plus G/S Installation And Operating Instructions Manual
-
Bticino ELECTRONIC TIMING THERMOSTAT ART. 4477 Owner's manual
-
Xavax 00111970 Zeitschaltuhr Owner's manual
-
