JUNG CD5234WW is a microprocessor-supported blind controller that can be placed into a 58 mm recessed box and is maintenance-free. It can control a motor with a maximum of 1000 VA connected load and limit switch. The device has 9 freely programmable memory registers for one "up" or one "down" time each. These times can be coordinated to any combination of weekdays. The blind controller has 4 operating modes:

1. Manual mode The blind is controlled up and down via keys, the slats are continuously adjustable (touch operation).
2. Automatic mode Programmed switching times are executed.
3. Operation with random generator