SMC EZ Connect g Owner's manual

Quick Installation Guide

Installationskurzanleitung

Guide d’installation rapide

Manual de instalación rápida

Snabbinstallationshandbok

Beknopte installatiehandleiding

Manual de Instalação Rápida

EZ Connect

TM

g Wireless USB 2.0 Adapter

Module USB 2.0 sans fil EZ Connect

TM

g

Adaptador inalámbrico USB 2.0 EZ Connect

TM

g

EZ Connect

TM

g trådlös USB 2.0-adapter

Adaptador USB 2.0 Sem Fios EZ Connect

TM

g

English

2

Contents

1

English 2-11

Deutsch 12-21

Français 22-31

Español 32-41

Svenska 42-51

Nederlands 52-61

Português 62-71

Compliances & Information 72-73

After unpacking the EZ Connect™ g 802.11g 108Mbps Wireless

USB 2.0 Adapter, check the contents of the box to be sure you

have received the following components:

• 1 SMCWUSBT-G EZ Connect™ g 802.11g 108Mbps Wireless USB

2.0 Adapter.

• 1 EZ Installation Wizard and Documentation CD.

• 1 Quick Installation Guide.

Immediately inform your dealer in the event of any incorrect,

missing or damaged parts. If possible, please retain the carton

and original packing materials in case there is a need to return

the product.

Please register this product and upgrade the product warranty at

SMC’s Web site:

http://www.smc.com

LED STATUS DESCRIPTION

Link On Indicates a valid connection.

Flashing Indicates the adapter is

scanning for available networks.

SMC’s EZ Connect™ g 802.11g 108Mbps Wireless USB 2.0 Adapter

(SMCWUSBT-G) is a high speed IEEE 802.11g-compliant wireless

network adapter that supports up to 108Mbps data rate, and

seamlessly integrates with existing Ethernet networks to support

applications such as mobile users or temporary conferences. This

solution offers a high data rate and reliable wireless connectivity

with considerable cost savings over wired LANs (which include

long-term maintenance overhead for cabling). Just install enough

wireless access points to cover your network area, plug wireless

cards into your notebooks or computers, and start networking.

The EZ Connect™ g 802.11g 108Mbps Wireless USB 2.0 Adapter

has two status LED indicators.

English

4

English

3

To install and connect to the SMCWUSBT-G, you must have:

• A PC running Windows 98SE/Me/2000/XP.

• CD-ROM drive.

• An available USB 2.0 port.

• Minimum of 32MB RAM and 300 MHz CPU.

• Minimum of 10MB available hard disk space for utility and driver

installation.

• Another IEEE 802.11b, or 802.11g compliant device installed on your

network such as the Barricade™ g 802.11g 108Mbps Wireless

Broadband Router (SMCWBR14T-G), or another wireless adapter,

such as the EZ Connect™ g 802.11g 108Mbps Wireless PCI Card

(SMCWCBT-G).

English

6

5

English

EZ Connect™ wireless products offer a fast, reliable, cost-effective

networking solution for:

• Remote access to corporate network information

E-mail, file transfer, and terminal emulation.

• Difficult-to-wire environments

Historical or old buildings, asbestos installations, and open areas

where wiring is difficult to employ.

• Frequently changing environments

Retailers, manufacturers, and banks which frequently rearrange

the workplace or change locations.

• Temporary LANs for special projects or peak periods

Trade shows, exhibitions, and construction sites that need a

temporary setup.

Retailers, airline, and shipping companies that need additional

workstations for peak periods.

Auditors who require workgroups at customer sites.

• Access to databases for mobile workers

Doctors, nurses, retailers, or white-collar workers who need

access to databases while being mobile in a hospital, retail store,

in an office, or on a campus.

• SOHO users

SOHO (Small Office and Home Office) users who need easy and

quick installation of a small computer network.

English

8

English

7

You are now ready to install the driver and the utility for the USB

adapter. Thus, the following instructions will guide through overall

the recommended installation procedures. In OS-specific

situations, you should follow the on-screen instructions depending

on your Operating system in order to proceed. (For the details,

please read refer the user’s manual.)

Follow these steps below to install the wireless adapter driver and

utility.

STEP 1. Close all Windows and programs that are running on your

PC or Laptop.

STEP 2. Insert the Utility CD into your

CD-ROM drive and double click

Setup.exe in the companion CD.

STEP 3. After you double click Setup.exe

in the companion CD, a “Preparing

Setup” window appears, and you

may go to a next step when the

processing bars end.

STEP 4. When the welcome screen

appears, click “Next”.

STEP 5. Please select “Complete”

and click “Next”.

STEP 6. The installation process

takes a few minutes, please

wait until it has completed.

STEP 7. During installation, a warning

window may pop up.

Click “Continue Anyway”

to continue the installation

process.

English

1

0

English

9

STEP 8. Plug in your wireless USB 2.0

adapter as indicated in the pop up

window below.

STEP 9. The USB device you inserted is

found.

Step 10. The System will check for new

hardware and meanwhile the “Found

New Hardware Wizard” screen will

appear: Choose “Install the

software automatically

(Recommended)” and then click

“Next”.

STEP 11. After clicking “Next” at the

last step, you will see a

window showing you:

Please wait while the wizard searches.

STEP 11a. While the wizard is running,

a “Hardware Installation”

warning window may pop up:

Click “Continue Anyway”

to continue the installation

process.

STEP 12. The wizard is installing the

driver, this may take several

minutes.

Deutsch

1

2

English

1

STEP 13. The adapter’s driver installation is

completed. Click “Finish” to

complete the installation process.

STEP 14. Finally, you will be asked to reboot

your computer.

It is recommended to restart your

computer now, or you may restart it

later.

STEP 15. To verify that you have successfully installed the driver and

utility, look for a logo indicating the

wireless signal strength at a lower

right side when your PC restarts.

Prüfen Sie nach dem Auspacken des EZ Connect™ g 802.11g 108

Mbit/s Wireless USB 2.0 Adapters den Packungsinhalt, um

sicherzugehen, dass folgende Teile geliefert wurden:

• 1 SMCWUSBT-G EZ Connect™ g 802.11g 108 Mbit/s Wireless USB

2.0 Adapter.

• 1 CD mit EZ Installationsassistent und Dokumentation.

• 1 Installationskurzanleitung.

Informieren Sie bitte sofort Ihren Händler, wenn Teile fehlen,

falsch sind oder Beschädigungen aufweisen. Heben Sie, wenn

möglich, den Karton und die Originalverpackung auf. Sie

benötigen diese, wenn Sie das Produkt zurücksenden.

Bitte lassen Sie das Produkt registrieren und aktivieren Sie die

Produktgarantie auf der SMC-Website:

http://www.smc.com

Page is loading ...

Español

4

1

PASO 13. La instalación del controlador

del adaptador ha finalizado.

Pulse [Finish] (Finalizar) para

completar el proceso de

instalación.

PASO 14. Por último se le pedirá que

reinicie el ordenador. Se

recomienda que reinicie el

ordenador ahora, pero puede

hacerlo en otro momento.

PASO 15. Para verificar si ha instalado

correctamente el controlador

y la utilidad, busque el logotipo

que indica la potencia de la

señal inalámbrica, que debe

aparecer en el lateral inferior

derecho al reiniciar el ordenador.

Svenska

4

2

Package ContentsPackage Contents

Kontrollera innehållet i lådan när du har packat upp den

trådlösa USB 2.0-adaptern EZ-Connect™ g 802.11g med

108Mbit/s så att du är säker på att du har fått följande delar:

• 1 SMCWUSBT-G EZ Connect™ g 802.11g trådlös USB 2.0-

adapter med 108Mbit/s.

• 1 CD med EZ Installationsguide och dokumentation.

• 1 snabbinstallationshandbok.

Skulle någon del vara felaktig, trasig eller saknas ska du

underrätta inköpsstället direkt. Behåll helst kartong och

originalförpackning om du skulle behöva returnera produkten.

Registrera produkten och uppgradera produktgarantin på

SMC:s webbplats: http://www.smc.com

SMC EZ Connect g Owner's manual

SMC EZ Connect g Owner's manual

in other languages

Related papers

Other documents