Arrive InfoPoint ID-1000 Installation guide

Brand: Arrive

Model: InfoPoint ID-1000

Type: Installation guide

Arrive InfoPoint

ID-1000

INSTALLATION GUIDE

3M VHB Sticker

Optional

Installer Provided

53.5”

48.7”

ADA LINE

FIN.FLR.LN.

54’’

ADA LINE

FIN.FLR.LN.

Client provided cable

trunking or other

cable masking

For glass wall installation, use the supplied 3M sticker to attach

the mounting bracket to the glass surface.

FOR NON-GLASS WALL INSTALLATION

FOR GLASS WALL INSTALLATION

Arrive Systems, Inc.

[email protected]

+1-844-427-7483 (USA/Canada Toll Free)

does not claim

ownership of any trademark other than the Arrive

, Arrive InfoPoint

™

, Arrive RoomPoint

™

, Arrive FacePoint

, Arrive ViewPoint

™

, Arrive CloudPoint

™

, Arrive MediaPoint

™

,Arrive AirPoint

™

, Arrive

MediaPoint

™

, Arrive TouchPoint

™

, Arrive ControlPoint

™

, Arrive CablePoint

™

, Arrive EyePoint

™

, Arrive VoicePoint

™

, Arrive SoundPoint

™

and Arrive Edgeless Media

trademarks. Specications are

subject to change without notice. All images are provided for reference use only, are graphically generated and representative for promotional purposes. Finished goods, packaging and products

will be provided with user interface designs and graphic elements including packaging design elements that may vary from the images shown in this document. E&OE.

AIP-ID-1000-802-001

1 2

4 5

Make sure that the Mode Switch is set to Host.

The Arrive InfoPoint™ ID 1000 can be powered by PoE. If PoE is not

available, use the optional AC Adapter and connect the network cable.