Whirlpool AWO/D 6130 Program Chart

Brand: Whirlpool

Model: AWO/D 6130

Type: Program Chart

Whirlpool AWO/D 6130 is a washing machine with a variety of features to make laundry day easier. It has 14 different wash programs to choose from, including Cotton, Synthetics, Delicates, and Wool. The machine also has a number of special options, such as Prewash, Rapid, and Clean+, which can be used to customize the wash cycle to your specific needs. Additionally, the AWO/D 6130 has a delay start feature, which allows you to set the machine to start washing at a later time.

E. Programme selector

F. “Start (Pause)” button

G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button

J. “Start delay” button

K. Time display

A. “Door open” indication

This washing machine is equipped

with automatic safety functions which

detect and diagnose faults at an early

stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

Programme

Care

Labels

Max.

Load

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Detergents and Additives Special options Max

Spin

Speed

rpm

Pre-

wash

Main

Wash

Softener Pre-

wash

Prelava.

Rapid

Rapido

Start

delay

Inicio

diferido

Clean+ Cold

wash

Lava.

frío

Intensive

rinse

Extra

acl./enx.

Easy

ironing

Fácil

Rinse

hold

Para cuba

llena/

cheia

Spin

Centrif.

Cotton/

Antibacterial

95 °C

Algod.

95 °C

6.0

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or

stains, you can add an oxygenbased bleach additive which can be used at 95°C. This

programme eliminates bacteria, ensuring sanitization of your laundry. The bacterial removal

efficiency has been tested following a similar methodology to the NF EN 13697 standard of

Nov. 2001

Yes

i i

–

i i

–

i i i i

Max.

Cotton

40 - 60 °C

Algod.

40 - 60 °C

6.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made

of cotton and linen.

Yes

i i i i i i i i i i

Max.

SuperEco

60 °C

6.0

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Economical energy consumption by prolonged wash duration - ideal to be run overnight to

profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin

speed to “0” and start spin programme in the morning, or by defining programme start with

“Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend

to use a laundry net.

– Yes

– –

–

i i

–

i i

Max.

Synthetics

30 - 40 - 60 °C

Sintéticos

30 - 40 - 60 °C

3.0

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.)

or their blends with cotton.

Yes

i i i i

–

i i i i i

Max.

Delicates

30 - 40 °C

Delicados

30 - 40 °C

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Yes

i i

–

– –

i i

1000

Daily load

40 °C

Diario

40 °C

3.0

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

blends. Effective one-hour programme. Make sure to wash only similar colours together in

one wash load.

– Yes

– –

–

i i i i i

Max.

Quick wash

30 °C

Rápido

30 °C

3.0

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

Brief programme to refresh your laundry.

– Yes

– –

–

– –

i i

Max.

Wool

Cold - 40 °C

Lana/lã

Frío - 40 °C

1.0

Only woollens, labelled with the Woolmark and identified as machine washable.

– Yes

– –

–

– –

i i

1000

Handwash

40 °C

A mano/mão

40 °C

1.0

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Care programme with a very gentle spin.

– Yes

– –

–

– –

i i

400

Lingerie

30 °C

Lingerie

30 °C

1.0

This programme is particurarly suitable to treat delicate lingerie (use of laundry net

strongly recommended).

– Yes

– –

–

– –

i i

400

Rinse & Spin

Aclar./enx.

& Centrif.

– 6.0

Same as the last rinse and the final spin in the “Cotton” programme.

– –

–

i i

Max.

Spin Centrif. – 6.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

– – – – –

Max.

Drain Desagüe/Drenag. – –

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

– – – – –

– – – – – – –

i : option / Yes : dosing required

For improved garment care spin speed is restricted in these programmes.

GB PROGRAMME CHART

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01281

ADD DETERGENTS, CLOSE THE DOOR AND

SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the the door can be opened. As long as a

wash programme is running, the door remains locked and

must on no account be forced open.

In case you have an urgent need to open it during a running

programme, refer to “Cancel (Reset) a running programme

before the end”.

Push the button(s) of any option(s) desired - the respective

indication lamp lights up. When the combination of

programme and additional option(s) is not possible,

the indication lights switch off automatically. Unsuitable

combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt) sensible. Increases the cycle time by approximately

15 min.

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for small loads or only lightly

soiled laundry.

PROGRAMME START

Open the tap and press the “Start (Pause)” button. The

indication lamp next to the “Start (Pause)” button lights

up. The programme sequence indicator shows the current

programme phase, running from left to right through Wash,

Rinse, Spin/Drain. The time display shows the remaining

programme time. Due to variations in load and temperature

of inlet water, the remaining time is newly calculated in

certain programme phases. If this is the case, an animation

appears on the time display.

PROGRAMME END

• All the lights of the programme sequence indicator are

off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

1. Press the “Start (Pause)” button to pause the

programme. The light blinks.

2. Select the new programme (with temperature), any

options and another spin speed if you want.

3. Press the “Start (Pause)” button again. The new

programme continues at the same position where

the previous programme was interrupted.

Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME

BEFORE THE END

“Clean+” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will

optimize the additive’s efficiency to get better wash

performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”;

choose temperature of 30 or 40°C and use with

maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together

with your detergent (only use powder detergent with this

option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches

must not be used!

“Cold wash” button

• Water is heated only up to 20ºC.

• Suitable for delicate laundry items with wash temperature

recommendation of max. 30ºC on the care label.

• Selectable only on the lowest temperature step

of each programme.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics”

and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun

very gently.

START DELAY

Add detergents as indicated on the front page and as

described in the chapter “Detergent and Additives” in your

Instructions for Use.

• Turn the programme selector to the desired

programme and temperature.

• The time display shows the duration of the chosen

programme (in hours and minutes), and the “Start

(Pause)” indication lamp is flashing.

• The indication lamp of the predefined spin speed lights up.

“Rinse hold” button

• The laundry remains in the last rinse water without

pregressing to the final spin cycle to avoid creasing

and prevent colours from changing.

• This option is particularly recommended for the

programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to

a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to soak for

too long.

Note: The programme stops to “Rinse hold” at the time

the “Rinse hold” lights in the preogramme sequence

indication is on. The indication lamp next to the “Start

(Pause)” button blinks.

Terminate the “Rinse hold” option:

• Press the “Start (Pause)” button; the programme

will terminate automatically with the final spin cycle

for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme

and press the “Start (Pause)” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during

rinse. The water is drained out only.

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds.

Any existing water is drained out. It may last some time

until the door can be opened.

The “Start delay” allows to run the machine at the

consumer’s convenience, for example at night when

electricity is cheaper. Do not use liquid detergent when

activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by

1 to 23 hours.

• Press the “Start/Pause” button. The countdown of the

delay time begins; the “Start delay” indication lamp and

the dot on the display will keep blinking until the

programme starts.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining

programme time.

• Once having pressed the “Start (Pause)” button,

the number of hours preselected can be reduced by

pressing again the “Start delay” button.

To cancel the “Start delay”

...before you press the “Start (Pause)” button:

• Turn the programme selector to another position or

press the “Reset” button.

...after having pressed the “Start (Pause)” button:

• Press the “Reset” button for at least 3 seconds - the

start delay time disappears from the time display.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01281

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

Cotton/ Antibacterial 95 6.0 59* 1.90 2:00 -

Cotton ** 60 6.0 49 0.90 4:00 2:30

Cotton ** 60 3.0 37 0.69 2:20 ***

Cotton 40 6.0 54 0.65 2:45 1:45

Cotton ** 40 3.0 37 0.58 2:30 ***

SuperEco 60 6.0 51 0.72 4:00 -

Synthetics 60 3.0 50* 0.70 1:30 1:09

Synthetics 40 3.0 46 0.50 1:15 0:54

Delicates 30 1.5 50 0.50 0:45 -

Daily load 40 3.0 45 0.45 1:00 -

Quick wash 30 3.0 40 0.40 0:30 -

Wool 40 1.0 55 0.60 0:45 -

Handwash 40 1.0 45 0.60 0:40 -

Lingerie 30 1.0 45 0.50 0:36 -

CONSUMPTION DATA

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the

home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type

of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin

speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that

time (see also “Troubleshooting Guide” in your Instructions for Use).

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

*** Automatic adaptation of programme duration after detection of wash load

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a

fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the

water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be

kinked or the filter must be cleaned (see “Cleaning the filter”

in your Instructions for Use).

Whirlpool AWO/D 6130 Program Chart

Whirlpool AWO/D 6130 Program Chart

Whirlpool AWO/D 6130 Program Chart

Related papers

Other documents