Whirlpool AKZ 315 AV Program Chart

Type
Program Chart

This manual is also suitable for

AKZ 315
PRODUCT DESCRIPTION SHEET
DE
AT
GR
5019 310 54771
OVEN
Last
First
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Oven light
6.
Circular heating element (not visible)
7.
Fan
8.
Lower heating element (not visible)
9.
Oven door hinges
10.
Oven door
Accessories:
Grid
Baking tray
Drip tray
CONTROL PANEL
1.
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Oven programmer
5.
Control knob for front, left cooking zone*
0
1 ... 10
6.
Control knob for rear, left cooking zone*
0
1 ... 10
7.
Control knob for rear, right cooking zone*
0
1 ... 10
8.
Control knob for front, right cooking zone*
0
1 ... 10
9.
Cooktop ON indicator light
*The cooktop control knobs are not interchangeable. After
cleaning or servicing, they must be returned to their
original positions.
Push push knobs
To use this type of knob, press it in the middle.
Turn the knob to the desired position.
Once cooking is over, turn the knob back to the position
marked by 0 and press it again to restore it to its
initial setting.
The cooling fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the oven and/or
cooktop. After the oven and/or the cooktop switch off, the
cooling fan may, however, continue to run for a certain time
to ensure proper cooling.
Important:
An optional kit consisting of an oven door glass
and of relevant mounting components, is available by the
After-Sales Service. The use of the kit reduces the temperature
of the outer oven surface and is strongly recommended if
there are kids in the house.
Code N°: 4819 310 39186.
0
Off
Oven light
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Pre-heat the oven to the required cooking temperature and
place the food inside as soon as the red thermostat
indicator light switches off.
-
Ideally, the shelf should be on the second runner level
when using the static function.
STATIC FUNCTION + FAN
Use this function when cooking on two different levels.
-
Oven pre-heating is not necessary (except for pizzas and
focaccia).
-
Switch the position of the dishes in the oven 10 minutes
before the end of cooking time.
-
Remove the cooked dish and, if necessary, continue
cooking the other one for as long as required.
GRILL FUNCTION
Use the grill function to cook small pieces of meat (steaks,
sausages) and for making toasts.
-
The oven door must be closed during the cooking cycle.
-
Pre-heat the grill for about 5 minutes.
-
Arrange the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover the
bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through cooking time.
GRILL + FAN FUNCTION
Ideal for large joints, pork, chicken and roast beef.
-
The oven door must be closed during the cooking cycle.
-
Place the meat on the grid with the drip tray underneath.
Pour water in the drip tray to cover the bottom to reduce
smoke and fat spatters.
-
Turn over the meat about half-way through cooking time.
DEFROST FUNCTION
Ideal for thawing frozen food to room temperature.
-
The food should be inserted in the oven in its wrapping to
prevent it from drying out.
FAN + BOTTOM HEATING FUNCTION
This function is ideal for:
-
large fruitcakes
-
timbales
-
stuffed vegetables
-
pizza
-
poultry (more than 3 kg)
Oven preheating is not necessary (except for pizzas and focaccia).
FAN FUNCTION
Use this function when cooking food on more than one level
(e.g.: fish, vegetables, pasta).
-
Choose foods that require the same cooking temperature.
-
Oven preheating is not necessary.
-
Remove the cooked dish and, if necessary, continue
cooking the other one for as long as required.
BOTTOM HEATING FUNCTION
Use:
-
To finish baking fruitcakes or cheesecakes.
-
To thicken sauces.
Use the lower heating function for the last 10 or 15 minutes of
cooking time.
Turn the selector knob to the required symbol.
The oven light switches on.
Turn the thermostat knob clockwise to the required
temperature.
The red thermostat indicator light switches on.
When the required temperature is reached, the red
thermostat indicator light switches off.
End of the cooking cycle:
Return the knobs to the OFF position (
0-
).
1.
Turn the knob fully anti-clockwise.
2.
Return the knob to the required cooking time.
3.
When the preset cooking time has elapsed, the oven
switches off.
To use the oven without programming the cooking time,
set the knob to .
Warning: If the programmer is on 0 the oven will not switch
on: to switch on the oven either set the programmer knob to
or set the required cooking time.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
PROGRAMMING COOKING TIME
The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function
symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food can be kept warm when cooking is finished.
How to operate:
1.
Turn the knob to .
2.
To deactivate the Keep Warm function, change the knob position.
DUAL ZONE FUNCTION (dependent on model)
This function is available on the front left and rear left cooking zones. The dual-zone function extends the heated area of the cooktop
so that you can use large, oval or rectangular pans.
How to operate:
1.
Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start flashing.
2.
Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit to show that the cooktop is
switched on.
3.
To deactivate the function return the knob to
0
.
FAST BOILING FUNCTION
This function makes it possible to bring water to the boil fast; the Fast Boiling function remains active for a preset time. Once the
preset time has elapsed, the cooktop returns automatically to maximum power level. The Fast Boiling function can be activated also
once you have already started cooking.
Warning:
Make sure you have placed the pan on the cooking zone before activating the fast boiling function or the glass-ceramic
surface may be damaged.
Specified performance values for the Fast Boiling function are guaranteed for all types of glass-ceramic cooktops.
How to operate:
1.
Place the pan on the chosen cooking zone.
2.
Set
the knob to .
GENTLE HEAT FUNCTION
Can be used to raise dough, soften hard butter from the fridge, keep a baby's bottle or a baby food warm, for yoghurt making, melting
chocolate, etc...
This function is available only when the residual heat indicator light is on.
How to operate:
1.
Make sure that the relative cooking zone residual heat indicator light is on.
2.
Turn the knob to .
3.
To deactivate the function change the knob position.
COOKTOP FUNCTIONS
This symbol does not correspond to any cooktop
mode; the heating element is not powered.
  • Page 1 1
  • Page 2 2

Whirlpool AKZ 315 AV Program Chart

Type
Program Chart
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI