Alape EV.3 Installation guide

Type
Installation guide

Alape EV.3

The Alape EV.3 is an angle valve cover that can be used to conceal unsightly angle valves. It is easy to install and can be cleaned with mild, soapy water. The EV.3 is made of high-quality materials and is designed to last for many years.

Some of the key features of the Alape EV.3 include:

  • Easy to install
  • Conceals unsightly angle valves
  • Made of high-quality materials
  • Durable and long-lasting
  • Easy to clean

The Alape EV.3 is a versatile product that can be used in a variety of applications. It is perfect for use in bathrooms, kitchens, and other areas where angle valves are visible. The EV.3 is also a great way to add a touch of style to your home.

Alape EV.3

The Alape EV.3 is an angle valve cover that can be used to conceal unsightly angle valves. It is easy to install and can be cleaned with mild, soapy water. The EV.3 is made of high-quality materials and is designed to last for many years.

Some of the key features of the Alape EV.3 include:

  • Easy to install
  • Conceals unsightly angle valves
  • Made of high-quality materials
  • Durable and long-lasting
  • Easy to clean

The Alape EV.3 is a versatile product that can be used in a variety of applications. It is perfect for use in bathrooms, kitchens, and other areas where angle valves are visible. The EV.3 is also a great way to add a touch of style to your home.

Alape GmbH
Am Gräbicht 1-9
D-38644 Goslar
Postfach 1240
D-38602 Goslar
Tel +49(0)5321 558 0
Fax +49(0)5321 558 400
E-Mail info@alape.com
www.alape.com
Montageanleitung Eckventilverkleidung EV.3
Installation instructions angle valve cover EV.3
951422/080807
Achtung:
Vor der Montage unbedingt die Leitung
spülen. Danach Wasserzufuhr am
Haupthahn abdrehen.
Important:
The pipe must be rinsed thoroughly
prior to assembly. The water supply
should then be turned off at the main
stopcock.
Pflegehinweise / Care instructions
Zur Reinigung nur milde, seifenhaltige
Reinigungsmittel verwenden.
Keine kratzenden, scheuernden, alkohol-,
ammoniak-, salzsäure-, phosphorsäure- oder
essigsäurehaltigen Reinigungs- oder
Desinfektionsmittel benutzen.
Keine Reinigung mit Hochdruck- und
Dampfstrahlgeräten!
For cleaning, use only mild cleaning products
containing soap. Do not use any cleaning or
disinfecting products that are abrasive or
scouring or which contain alcohol, ammonia,
hydrochloria acid, phosphoric acid or
acetic acid.
Do not clean with high-pressure or
steam jet devices!
90 303 00 00
951422/080807
Montageanleitung EV.3 / Installation instructions EV.3
951422/080807
Montageanleitung EV.3 / Installation instructions EV.3
5. Ventil wird in geschlossener Stellung geliefert.
Zum Aufdrehen Haube entfernen und
anschließend durch Linksdrehung Öffnen. Danach
Haube wieder aufstecken und fest andrücken.
The valve is delivered in the closed position. To
open it, remove the cap an turn the knob
anticlockwise. The replace the cap and press it
on firmly.
2. Achtung:
Eckventil nicht mit Hanf, Kitt oder Gewindeband
abdichten.
Important:
Do not seal the angle valve with hemp, putty or
thread sealing tape.
4. Blendrohr über Armaturenschlauch oder
Chromrohr schieben.
Messing-Konus-Quetschverbindung mit einem
19-er Gabelschlüssel oder einer Armaturenzange
fest anziehen und Chromrohr aufstecken.
Slide the cover tube over the hose fixture or
chrome pipe. Tighten the conical brass
compression connection with a 19 mm openend
spanner or wrench an connect it to the chrome
pipe.
1. Die Rosette auf das Eckventil aufschieben.
Slide the circular cover plate over the angle
valve.
3. Eckventil über den Dichtring hinaus bis
Gewindeende einschrauben.
Das Anschlussgewinde muss gradfrei sein.
Ausrichten und Zurückdrehen ist möglich.
Die Verbindung bleibt dicht.
Screw in the angle valve on top of the sealing
ring until the end of the thread is reached. The
connection thread must not have any rough
edges. It is possible to adjust the angle valve
an turn it back. The connection will remain
tight.
90 303 00 0090 303 00 00
  • Page 1 1
  • Page 2 2

Alape EV.3 Installation guide

Type
Installation guide

Alape EV.3

The Alape EV.3 is an angle valve cover that can be used to conceal unsightly angle valves. It is easy to install and can be cleaned with mild, soapy water. The EV.3 is made of high-quality materials and is designed to last for many years.

Some of the key features of the Alape EV.3 include:

  • Easy to install
  • Conceals unsightly angle valves
  • Made of high-quality materials
  • Durable and long-lasting
  • Easy to clean

The Alape EV.3 is a versatile product that can be used in a variety of applications. It is perfect for use in bathrooms, kitchens, and other areas where angle valves are visible. The EV.3 is also a great way to add a touch of style to your home.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages