Displays2go FD30S42BKC Assembly Instructions

Hello! I'm a chat assistant and I have reviewed the instructions for the Bar Table FD24, FD30. This document details how to assemble your table, including the attachment of glides, column, plate and table top. It also highlights unique features like the purse hook. I'm ready to answer any questions you have about the assembly process or the table itself.
What tool is needed for assembly?

What should I do before starting the assembly?

How do I attach the table top?

BAR TABLE

PARTS

A1 pc

HARDWARE BAG

H1 1 pc

B

Bottom

Base screw

1 pc

Bottom Base

Column

Attention: Before you start assembling your table top; please prepare a soft surface work area on the floor. The only tool

you will need is a screwdriver. Carefully remove all hardware from packaging and place the hardware parts on the soft work

area where they will not come in contact with the laminated wood components. To avoid damage to the laminated wood

surfaces, keep hardware parts separated until they are needed for assembly.

C1 pc

Plate

H3 2 pcs

Plate Nut

D1 pc

Table Top

H2 4 pcs

Glides H4 8 pcs

Wood

Screw

A

B

C

D

Please use 4 pre-drilled holes on the reverse

side to install

H1

H2

H3

H4

Fig. (1)

Fig.(2)

Fig. (3)

ASSEMBLY INSTRUCTIONS

Step 1: Attach glides (H2) to

bottom base (A).

Step 2: Attach column (B) to

bottom base using bottom base

screw (H1).

Step 5: Attach table top (D) to Plate by inserting wood

screws (H4) through holes in plate and into table top.

FD24, FD30 CUSTOMIZED COUNTERTOP SERIES

If you have any questions regarding our products, please contact D2G customer service.

Tighten the screw to

fix the purse hook

Step 3: Slide purse hook over column

and secure by tightening screw.

Step 4: Attach plate (C) to column

using plate nuts (H3).

/

Other documents