InWin 103 Phantom Gaming Edition User manual

Category
Computer cases
Type
User manual

InWin 103 Phantom Gaming Edition is a mid tower chassis compatible with ATX, Micro-ATX, and Mini-ITX motherboards. It supports up to seven PCI-E expansion slots and has a maximum VGA card length of 421mm. The case has a maximum CPU heatsink height of 160mm and comes with two pre-installed 120mm fans in the rear and side. It also has mounting areas for additional fans or radiators in the front, side, and bottom. The front panel has two USB 3.0 ports and HD audio ports. The case is made of SECC, ABS, PC, and tempered glass. It has dimensions of 426 x 220 x 480mm and weighs 7.31kg.

InWin 103 Phantom Gaming Edition is a mid tower chassis compatible with ATX, Micro-ATX, and Mini-ITX motherboards. It supports up to seven PCI-E expansion slots and has a maximum VGA card length of 421mm. The case has a maximum CPU heatsink height of 160mm and comes with two pre-installed 120mm fans in the rear and side. It also has mounting areas for additional fans or radiators in the front, side, and bottom. The front panel has two USB 3.0 ports and HD audio ports. The case is made of SECC, ABS, PC, and tempered glass. It has dimensions of 426 x 220 x 480mm and weighs 7.31kg.

User Manual
Phantom Gaming
Product Story
Joining the ASRock Phantom Gaming
Alliance is the InWin 103 mid tower
chassis. The 103 Phantom Gaming
edition captures the spirit of gaming
by embracing the black and red
pinstripes. With this sweet case, youll
game like a phantom!
Our products comply with RoHS regulation
Specifications may vary based on different regions
Model
Part Number
Colors
Case Type
Materials
M/B Compatibility
Expansion Slots
Maximum
Compatibility
Front Ports
Internal Drive Bays
Thermal Solution
Compatibility
Power Supply
Compatibility
Product Dimensions
(H x W x D)
Product Dimensions
(H x W x D)
with screw & handle &
stand height
Package Dimensions
(H x W x D)
Net Weight
Gross Weight
103
IW-103-PGE
Black
Mid Tower
SECC, ABS, PC, Tempered Glass
12" x 10.5" ATX, Micro-ATX, Mini-ITX
PCI-E x 7
VGA Card Length: 421mm (Maximum)
VGA Card Length: 305mm
(With Side Radiator)
CPU Heatsink Height: 160mm
2 x USB 3.0
HD Audio
2 x 3.5"
2 x 2.5" (Max. up to 4 bays)
1 x 120mm Rear Fan / 120 mm Radiator
2 x 120mm Side Fan / 240mm Radiator
3 x 120mm Bottom Fan / 360mm Radiator
PSII : ATX12V
-Length up to 200mm
426 x 220 x 480mm
16.7" x 8.7" x 18.9"
446 x 227 x 480mm
17.6" x 8.9" x 18.9"
506 x 282 x 532mm
19.9" x 11.1" x 20.9
"
7.31kg / 16.1lb
8.47kg / 18.6lb
Specifications
Package Contents
103 Chassis
QR Code
Accessory Bag
Accessory Bag
A. Motherboard Stand-offs x 7
B. Motherboard Stand-off
Socket x 1
C. Hexagon Head Screws x 18
D. 2.5” HDD Screws x 12
E. Water-cooling System
Washers x 8
F. Cable Ties x 10
G. 3-pin Headerx 1
H. Graphics Card Holder x 1
I. RGB Controller x 1
A B C
D E
HG I
F
Case Structure
1
Power Button
2
Logo
3
USB 3.0 Ports
4
Audio Ports
(Earphone and Microphone)
1
2
34
Case Structure
5
3.5”/2.5” Drive Bay
6
Side Fan/ Radiator Mounting Area
7
Rear Fan/ Radiator Mounting Area
8
Bottom Mounting Area/ Radiator
Mounting Area
9
Motherboard Mounting Area
10
PCI-E Expansion Slot
11
Extra PCI-E Supporting Mounting Hole
5
6
7
8
9
10 11
Case Structure
12
13
14
15
Power Supply Mounting Area
2.5” Drive Bay
Shock-Proof Stand
Fan Dust Filter
15
13
14
12
up to 200mm
Installation Guide
(Please follow the related chapters to assemble)
For the side panel,
please pull the two tabs
and lift the glass up.
01 Opening
the Chassis
Parts Required:
Hexagon Head Screws
Power supply must be
mounted on the top
bracket.
02 Power Supply
Installation
Parts Required:
Motherboard Stand-Offs,
Motherboard Stand-Off
Socket, Motherboard
Screws
Motherboard
Installation
03
Parts Required:
Hexagon Head Screws,
Graphics Card Holder
04 Expansion Card
Installation
Parts Required : RGB Controller
05 Addressable
RGB logo
5-1 If your motherboard hosts a 3-pin ADD header,
please connect the InWin logo ADD RGB module
to the 3-pin addressable header of your
motherboard.
* If your motherboard doesn't have a 3-pin ADD
header, please use the provided RGB controller to
connect the InWin logo ADD RGB module to your
PSU to set the default lighting.
* The bottom on the controller is to switch lighting
modes.
3-Pin connector
ADD_HEADER
+5V D
IN-WIN LOGO
ADD RGB Module
GND
KEY
D
+5V
GND
KEY
D
+5V
SATA Power
Controller
SATA Power
Parts Required:
Power SW/ HD Audio/ USB3.0 Header
06 I/O Wires
Installation
5-2 3-pin Header
IN-WIN LOGO
ADD RGB Module
GND
KEY
D
+5V
GND
KEY
D
+5V
GND
KEY
D
+5V
Motherboard Add_header
GND
KEY
D
+5V
3 Pin-header Other Addreassble Light
POWER SW
HD AUDIO
07
2.5”/ 3.5” Drive
Bays Installation
USB3.0 Header
Parts Required: Water-cooling
System Washers
08 Fan / Liquid Cooling
Radiator Installation
Parts Required: Cable Ties
09 Completing
Installation
注意事項和保固範圍
1. Please follow the user manual for
installation guidelines.
2. When installing the computer components,
please use the antistatic precautions to
prevent ESD(electrostatic discharge)
damage. This can cause injury to the
installer and/or damage to the machine.
Incorrect installation may burn
motherboard and other system
components.
3. To avoid any damages, please do not use
this product for any other purpose than its
intended use.
4. Any modifications may damage the product.
5. Please remove all internal devices before
shipping or moving. (Including power
supply, hard drive, CD-ROM, motherboard
and CPU, etc.)
For more detailed warranty information,
please visit the InWin retail website at
www.in-win.com.
The actual product is subject to change
without prior notice. In Win
Development Inc. reserves the right to
make final modifications.
Notices and Warranty
Notices
Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

InWin 103 Phantom Gaming Edition User manual

Category
Computer cases
Type
User manual

InWin 103 Phantom Gaming Edition is a mid tower chassis compatible with ATX, Micro-ATX, and Mini-ITX motherboards. It supports up to seven PCI-E expansion slots and has a maximum VGA card length of 421mm. The case has a maximum CPU heatsink height of 160mm and comes with two pre-installed 120mm fans in the rear and side. It also has mounting areas for additional fans or radiators in the front, side, and bottom. The front panel has two USB 3.0 ports and HD audio ports. The case is made of SECC, ABS, PC, and tempered glass. It has dimensions of 426 x 220 x 480mm and weighs 7.31kg.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI