Aliph Jawbone Owner's manual

Category
Mobile headsets
Type
Owner's manual
User’s Guide
1. Basic Stuff You Need to Know
• Talk Button: Press once – Ans / End
Press and hold 3 seconds – On / Off
• Noise Shield Button: Press and hold 3 seconds for pairing
(Jawbone must be off)
Press and hold 3 seconds for Noise Shield On/Off
Press once – volume up
2. Get Going Quickly
• Activate phone’s Bluetooth® feature, then press the ‘Noise Shield Button’
for 3 seconds (Jawbone must be off)
• On phone, ‘Search for New Devices’ select “Jawbone”; passcode “0000”
• If the headset is not already on, press and hold the ‘Talk Button’ for 3
seconds
• You are now ready to use Jawbone
Note: The Noise Shield technology is on by default whenever Jawbone is turned on or
a call is received or placed.
Jawbone®—Designed and manufactured by Aliph.
Jawbone® and Aliph are trademarks of AliphCom.
Made in China.
22-0000-001
Talk Button Earloop
Noise Shield Button Earbud
Voice Activity Sensor
: Talk everywhere.
Jawbone is the world’s first adaptive Bluetooth
headset for mobile phones. Its revolutionary Noise
Shield technology combines the latest innovations
in acoustics, audio processing and product design
to produce a quantum leap in headset performance.
Not only does the Jawbone technology virtually
eliminate all background noise from your call, but
as your background changes it also seamlessly
adjusts the speaker output so you can hear your
caller’s voice better. Jawbone’s intelligent system of
sensors, software, and ergonomic features allows
you to use your mobile phone in any environment
without shouting or straining to hear.
Jawbone Technology Breakthroughs
Jawbone identifies your speech:
A proprietary voice activity sensor identifies precisely
when you are speaking, in any noise environment.
Unlike other headsets, Jawbone can easily separate
your speech from other sounds nearby.
Jawbone eliminates noise:
Jawbone uses highly directional microphones and
powerful signal processing algorithms to remove
background noise from your outgoing speech signal.
This allows you to be heard clearly in any environ-
ment without the need to shout and disturb others
around you.
Jawbone automatically enhances incoming audio:
The volume and frequency content of the incoming
speech is dynamically adjusted to maximize intelligi-
bility in any noise environment. No matter where you
are, Jawbone will adapt to your environment.
1
Jawbone Package Contents
What’s in the boxes?
Box 1: Customize your fit
• 1 Standard Right Ear Earloop (“Standard R ”)
• 1 Standard Left Ear Earloop (“Standard L”)
• 1 Large Right Ear Earloop (“Long R ”)
• 1 Large Left Ear Earloop (“Long L”)
• 4 Earbuds of various sizes and shapes to fit your ear
Note: You will find these earloop names are inscribed on the
edge of each earloop tail.
Box 2: Power up
• Wall charger unit with USB socket
• USB charger cable
Getting Started
1. Charging Jawbone
Jawbone comes with a built-in rechargeable battery.
Please charge the battery fully before first use.
Connect Jawbone to the USB cable with the
lettering “TOP” facing up. The crescent hole of the
connector should be facing down so that it engages
with Jawbone’s earplug.
2 3
Once Jawbone has been engaged in the charger
cable you can charge Jawbone in two ways:
1. Insert the USB end into the wall charger. To begin
charging, plug the wall charger into a standard 120V
wall outlet.
The LED indicator will turn red when the USB cable
is correctly engaged and the battery is charging.
When charging is complete, the LED will change
from red to white and Jawbone will turn off.
2. You can charge Jawbone directly from your PC or
MAC by plugging the USB end into a USB port on
your personal computer.
Note: Make sure that your computer is on when trying to
charge Jawbone.
4 5
IMPORTANT NOTE: There may be a delay of up to 30
seconds in the appearance of the red charging light if
the Jawbone battery is severely depleted.
Normal Charging Time
It takes about 2 hours to charge a fully depleted
battery. When the battery is fully charged, the LED
status indicator will change from red to white and
then turn off. Unplug Jawbone from the charger
cable and it is ready for use.
Talk and Standby Time
The fully charged battery offers up to 6 hours of talk
time and up to 120 hours of standby time. Jawbone
automatically enters standby mode at the end of
every call.
Low Battery Indication
When the battery is nearly depleted in either active
or standby mode, the LED status indicator will flash
red and Jawbone will emit a beep every minute.
Please follow the preceding instructions to recharge
the battery.
Talk Button :
• Press once – Ans / End
• Press and hold 3 seconds – On / Off
Noise Shield Button :
• Press and hold 3 seconds for pairing
(Jawbone must be off)
• Press and hold 3 seconds for Noise Shield On/Off
• Press once – volume up
Note: Both the ‘NOISE SHIELD BUTTON’ and the
‘TALK BUTTON’ are hidden beneath the external face
of the headset. To activate either button, simply press on
the indicated area.
2. Jawbone Air overview
Talk Button
Noise Shield Button
6 7
3. Pairing Jawbone
Jawbone works with Bluetooth-enabled devices
only. Prior to pairing your headset for the first time,
please ensure that your mobile phone is Bluetooth
capable and the Bluetooth feature is enabled.
The first time that you use Jawbone with your Blue-
tooth-enabled phone, you will have to “pair” them to-
gether. This is a procedure that exchanges informa-
tion between your phone and the Jawbone so that
they can work together. Pairing is only required the
first time you use the Jawbone with your phone. The
headset pairing procedure will vary depending on
the model of your mobile phone. Please refer to your
mobile phone user guide for pairing instructions.
NOTE: Instructions on how to pair Bluetooth devices with
many popular phones can be found on our website at
http://www.jawbone.com.
Steps for Pairing Jawbone:
1. Place Jawbone where it is no more than one meter
away from your mobile phone.
2. Ensure Jawbone is off (the LED status indicator
should not be flashing).
3. Activate your mobile phone’s Bluetooth function.
Please refer to your mobile phone user guide or
http://www.jawbone.com for details.
4. Press and hold the ‘NOISE SHIELD BUTTON’
for 3 seconds until the LED status indicator alternately
flashes white and red. This means Jawbone is now in
pairing mode. This mode will last for 2 minutes or until
pairing is complete.
5. Set the mobile phone to search for all available
Bluetooth devices. When the search is complete, select
Jawbone” from the list of devices shown.
6. Enter the passkey “0000” and press “OK” to pair
Jawbone with your mobile phone. When the pairing
is completed, Jawbone will beep and the LED status
indicator will then flash white rapidly eight times.
7. If prompted by the phone to connect, select “Yes”
(this will vary between phones).
8 9
‘TALK BUTTON’ once when Jawbone is in
standby.
4. Jawbone automatically enhances the volume of your
call depending on the noise of your environment. If you
want to adjust the volume of your call further, use your
mobile phone’s volume button or press the ‘NOISE
SHIELD BUTTON’ one time to increase the
volume by one level (there are a total of six levels).
4. Turning Jawbone On and Off
Press and hold the ‘TALK BUTTON’ for three
seconds until you hear a short beep. The LED status
indicator will then flash white.
IMPORTANT: After you turn Jawbone on, you may need
to press the ‘TALK BUTTON’ one time to reactivate
pairing and resume the connection between the head-
set and the mobile phone. (For pairing instructions,
please refer to the “Pairing Jawbone” section.)
Turning off Jawbone
To turn Jawbone off, press and hold the ‘TALK
BUTTON’ for three seconds until you hear a long
beep. The LED status indicator will flash red and then
go off.
8. Go back to your mobile phone’s main menu. For
certain mobile phone models, once the headset is
activated, a headset icon will be displayed on the
screen. You should now be able to make and receive
calls using Jawbone.
NOTE: After the initial pairing, the phone and Jawbone
will remember each other. Therefore you will not have to
pair your headset with your phone every time you use it.
Just select “Jawbone” from the list of paired devices and
connect to it.
IMPORTANT: If the pairing cannot be completed within
two minutes after the pairing mode has been activated,
Jawbone’s LED indicator will flash red and beep three
times. Jawbone will then turn off automatically. Please
repeat steps 2 to 8 above to pair Jawbone and the
mobile phone again.
Using Jawbone after it is Paired and
Connected
1. To answer a call, press the ‘TALK BUTTON’
once.
2. To end a call, press the ‘TALK BUTTON’ once.
3. If Jawbone is connected to the phone and you make
a call, the audio will automatically be routed to
Jawbone. To make a call using voice dialing, press the
10 11
Using Jawbone Answering a Call
When there is an incoming call, you will hear the ring
through the earphone. Press the ‘TALK BUTTON’
once to accept the call or answer the call using your
mobile phone by following the phone’s normal
procedure.
Ending a Call
Press the ‘TALK BUTTON’ once to end your call,
or end the call using your mobile phone by following the
phone’s normal procedure.
Rejecting a Call
If you do not wish to answer an incoming call, press the
‘NOISE SHIELD BUTTON’ button once to reject
the call.
Dialing from Your Mobile Phone
Simply make calls on your mobile phone by following
the phone’s normal procedure.
Voice Dialing from Jawbone
If your mobile phone is equipped with a standard voice
dialing function, simply press the ‘TALK BUTTON’
once when in Standby Mode, and when you hear a
beep say the voice tag. We recommend that you record
the voice tag using Jawbone for maximum effectiveness.
Turning Jawbone Noise Shield Off
While on a call, press and hold the ‘NOISE SHIELD
BUTTON’ for 3 seconds. The LED status indicator
will blink red and descending tones will be heard in the
earpiece.
Turning Jawbone Noise Shield On
While on a call, press the ‘NOISE SHIELD BUTTON’
for 3 seconds. The LED status indicator will blink
white and ascending notes will be heard in the earpiece.
Note: The Noise Shield technology is on by default when-
ever Jawbone is turned on or a call is received or placed.
Talk Button
Noise Shield Button
12 13
Last Number Redialing from Jawbone
Depending on your phone’s functionality, you may be
able to redial your last placed call by pressing the
‘TALK BUTTON’ on your headset twice while in
standby mode.
Transferring a Call from Jawbone to Mobile
Phone Handset
While on a call, press and hold the ‘TALK BUTTON’
for 3 seconds
Transferring a Call from Mobile Phone to
Jawbone
If you have already transferred a call from Jawbone to
your mobile phone, you may reverse the process by
pressing the ‘TALK BUTTON’ one time.
Adjusting the Volume
Jawbone will adjust the volume accordingly depending
on your noise environment. If you feel that Jawbone is
either too loud or too faint, you can adjust the volume of
your call in two different ways:
1. Press the volume keys on your mobile phone to
increase or decrease the volume.
2. Press the ‘NOISE SHIELD BUTTON’ one
time to increase the volume by one level. Jawbone has
a total of six volume levels. By pressing the ‘NOISE
SHIELD BUTTON’ again, you will advance
through these volume levels and hear a 2-step tone.
Each successive volume level is identified by a
corresponding pitch increase in the second tone. After
reaching the maximum volume, you will hear two tones
of the same pitch. Once you reach the maximum volume
level, if you press the ‘NOISE SHIELD BUTTON’
again, Jawbone will return to the lowest volume level.
NOTE: Not all phones support the first option.
IMPORTANT: The above functions are only applicable
to mobile phones that support the Bluetooth Handsfree
Profile. Not all phones support all features. Please
refer to your mobile phone user guide for additional
information.
14 15
Resetting
You may reset Jawbone to its original settings at
anytime. You should not have to repeat the pairing
process after resetting Jawbone.
Press the reset button by inserting the metal end of the
earloop in the reset hole (center hole in the row of five
holes located at the back of Jawbone). Jawbone will
then be turned off and returned to its original settings.
Customize Your Fit
To wear your Jawbone, tuck the earloop behind your
ear, place the earbud snugly inside your ear, and rest
the voice activity sensor on your cheek as shown in the
diagram.
1
2
3
16 17
It is important for the voice activity sensor to touch your
cheek. If the voice activity sensor does not touch your
cheek, your caller will not hear you properly.
Earloop
The standard right-side earloop and earbud are fitted to
Jawbone at the factory. If you would like to change the
earloop to a different size or use an earloop designed
for your left ear, gently pull the standard size earloop
out of Jawbone. You may then insert another earloop
that results in the best fit for you.
18 19
Earbud
Ears vary widely in shapes and sizes, so Jawbone comes
with multiple earbuds. If you find that the standard
earbud does not fit your ear correctly, choose a different
fit by selecting one of the additional earbuds included.
Few people have exactly the same fit in each ear, so try
the other ear as well to see if you get a better fit.
The earbud connects to Jawbone using a simple ‘rotate
and lock’ system, illustrated below:
The barrel
Note: To insert earloops meant for the left ear, you will need
to turn the headset over.
20 21
4) The earbud is now in the correct position.
3) Following the arrow marks on Jawbone’s barrel,
rotate the earbud counter-clockwise a quarter turn (90
degrees) until it is pointing left.
Attaching the Earbud (see figures below)
1) Hold Jawbone in your hand with the barrel facing you
(see figure).
2) With the earbud pointing upwards (see figure), push
the earbud onto the barrel. The positioning marks on
the earbud and the Jawbone barrel will align.
Removing the Earbud
1) Rotate the earbud a quarter turn (90 degrees)
clockwise.
2) Pull the earbud off Jawbone’s barrel vertically.
22 23
Care and Maintenance
• Turn off your Jawbone before placing it in your pocket
or bag. If the ‘TALK BUTTON’ is accidentally
pressed, your mobile phone may place an unintended
call.
• Do not expose your Jawbone to liquid, moisture,
humidity, or rain. Jawbone is not waterproof.
• Do not use abrasive cleaners to clean your Jawbone.
• Do not expose your Jawbone to extremely high or low
temperatures.
• Do not leave your Jawbone in direct sunlight for an
extended period of time.
• Do not leave your Jawbone near open flames such as
cooking burners.
• Do not dispose your Jawbone in a fire. The battery
could explode.
• Do not bring your Jawbone into contact with any sharp
objects. This can cause scratches and damage.
• Do not insert anything into your Jawbone unless other-
wise specified in the user manual. This may damage the
internal components.
• Do not attempt to disassemble your Jawbone It does
not contain serviceable components.
Troubleshooting
If you are unable to connect your Jawbone and mobile
phone, please try the following:
• Ensure that your battery is fully charged. Turn off
Jawbone, and then turn it on again.
• Ensure that Jawbone is paired with your mobile phone.
• Ensure your mobile phone’s Bluetooth function is
activated (for some phone models, a headset icon will
appear on the phone’s screen). Please refer to your
mobile phone user guide for specific instructions.
• Ensure that Jawbone is within 1 meter of your mobile
phone and there are no obstructions, such as walls or
other electronic devices.
If the above suggestions do not help solve your
problem, please reset and recharge Jawbone and begin
the pairing process again.
Jawbone is compliant with Bluetooth Specification
Version 1.2 Class 2 specifications. Due to large
variability between different handsets from different
manufacturers, interoperability between Jawbone and
all Bluetooth-enabled products is not guaranteed.
24 25
Safety Information
• Check and observe local laws regarding the use of
a mobile phone and headset while driving. If you use
Jawbone while driving, ensure that you maintain your
full attention and focus; it is your responsibility to drive
safely. Consider pulling off the road before making or
answering a call.
• Never leave your Jawbone above any air bag
deployment area inside your car as serious injury may
result when an air bag deploys.
• Never allow children to play with the headset; the
small components of the headset may be a choking
hazard.
• Observe all signs and displays that require an
electrical device or RF radio product to be switched
off in designated areas.
• Turn off your Jawbone prior to boarding aircraft.
Do not use inside an aircraft in flight unless allowed
by your airline.
• To prevent damage to your hearing, DO NOT set the
listening volume too high.
• Never use Jawbone while taking a bath.
• Do not use Jawbone in a sauna or steam room.
• Do not keep your Jawbone near a sink or other wet
areas.
Built-in Battery care:
• Do not attempt to replace your Jawbone’s battery.
It is built-in and not changeable.
• Charge the battery in accordance with the instructions
supplied with this user guide.
Charger care:
• Use only the charger supplied by Jawbone’s original
manufacturer to charge Jawbone. Other chargers may
look the similar but using them could be dangerous and
could damage Jawbone.
• Do not attempt to disassemble the charger as it may
expose you to dangerous electric shock.
• Do not use the charger outdoors or in damp areas.
• Only charge your Jawbone’s built-in battery in
accordance with the instructions described in this user
guide.
• Avoid charging your Jawbone in extremely high or low
temperatures.
• Do not use your Jawbone while it is charging.
• Do not connect Jawbone to the charger while on an
active call.
26 27
© 2006 Aliph
For warranty information see the support section at
http://www.jawbone.com
For customer support questions, call
408-848-4348,
All rights in this publication are reserved and no part
may be quoted or reproduced without the prior written
permission of Aliph. The contents of this publication
are believed to be correct at the time of print, but any
information, specifications, products or services
mentioned may be modified, supplemented or with-
drawn without further notice.
The Bluetooth® word mark and logos are
trademarks owned by Bluetooth SIG, Inc, USA
and licensed to i.Tech Dynamic Limited.
• Do not attempt to modify Jawbone.
• Do not attempt to force open the built-in battery.
• Dispose of the battery according to local regulations.
Do not dispose of the battery with household waste.
• Disposal of the packaging and Jawbone should be
done in accordance with local regulations.
Other Notes
Packaging and Product Disposal
Dispose of the packaging and this product in
accordance with the latest provisions.
FCC Compliance:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Cautions: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
28 29
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Aliph Jawbone Owner's manual

Category
Mobile headsets
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI