Symmons 413RH Installation guide

413RH
Symmons
Brand
Symmons
Model
413RH
Category
Wall & ceiling mounts accessories
Type
Installation guide
1
413RH, 413TB-18, 413TB-24, 413TP, 413TRR, 413TRL
Naru® Accessories
Operation & Maintenance Manual
Model Numbers Specifications
413RH Robe Hook
413TB-18 18" Towel Bar
413TB-24 24" Towel Bar
413TP Toilet Paper Holder
413TRR Right Mount Towel Ring
413TRL Left Mount Towel Ring
All premium accessories made from metal construction,
plated in standard polished chrome nish.
Modifications Warranty
-PNL Polished nickel finish
-STN Satin nickel finish
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
2
Dimensions
Measurements
A 2 7/8", 73 mm
B 2", 51 mm
C 2 1/4", 57 mm
D 6 3/8", 162 mm
E 1 3/4", 44 mm
F 4 1/8", 105 mm
G 10 1/2", 267 mm
H 2 1/8", 54 mm
I 3 1/8", 79 mm
J 18", 457 mm
K 22", 559 mm
L 2 15/16", 75 mm
M 24", 610 mm
N 28", 711 mm
Required for Installation
Phillips head
screwdriver
Allen wrench
(2mm)
Power drill
Flathead screwdriver
Note: Dimensions are subject to change without notice.
DD
F
F
B
B EE
A
A
C
C
413RH
413TRR
413TP
HH
J
J
K
K
H
H
M
M
N
NL
L
L
L
413TB-18
413TB-24
GG II
H
H
413TRL
GG II
H
H
3
Installation
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 413TB-18 and 413TB-24 only.
Make sure both centerline
marks are
level.
2a)
Dry Wall Option: Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 5/16” holes
into wall.
Note: For plaster walls 1/2” thick or
less, insert toggle tool into toggle
anchor to secure behind wall prior to
installing accessory trim.
2b) Stud Option:
Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes
into wall.
Note: For 413TP go to step 6b.
3) With mounting brackets in
position, secure to wall using
screws.
4) Hang top of accessory on
mounting bracket. Lower into
position.
5) Secure with set screw.
1
2
1
3
3
2
1
2
1
2
4
Installation
6a)
413TP Dry Wall Option:
Place
mounting brackets into desired
position. Using brackets as a
guide, mark holes. Screw
self-drilling anchors into wall.
6b) 413TP Stud Option:
Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 3/16" holes
into wall.
7) With mounting brackets in
position, secure to wall using
screws.
8) Slide accessory into position on
bracket and secure with set screw.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
Copyright © 2019 Symmons Industries, Inc.
■
symmons.com
■
[email protected]
■
ZV-3091 REV A 060619
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
1
3
4
2
1
2
1
3
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Symmons 413RH Installation guide

413RH
Symmons
Brand
Symmons
Model
413RH
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents