Symmons 553RH-STN Installation guide

553RH-STN
Symmons
Brand
Symmons
Model
553RH-STN
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

553RH, 553TB-18, 553TB-24, 553TP, 553TR
Elm
™
Accessories
Operation & Maintenance Manual
Model Numbers Specifications
553RH Robe Hook
553TB-18 18" Towel Bar
553TB-24 24" Towel Bar
553TP Toilet Paper Holder
553TR Towel Ring
All premium accessories made from brass plated in
standard polished chrome nish.
Modifications Warranty
-SBZ Seasoned bronze finish
-STN Satin nickel finish
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.
Note: Append appropriate -sufx to model number.
2
Note: Dimensions are subject to change without notice.
Dimensions
Measurements
A 2-3/8", 60 mm
B 3-5/8", 92 mm
C 3", 76 mm
D 7", 178 mm
E 7-7/8", 200 mm
F 3-1/4", 83 mm
G 8", 203 mm
H 2-1/8", 55 mm
I 10", 254 mm
J 3-1/4", 83 mm
K 19-7/8", 505 mm
L 22", 559 mm
M 25-15/16", 659 mm
N 28", 711 mm
Required for Installation
Phillips head
screwdriver
Allen wrench (3/16")
AA
B
B
HH
H
H
H
H
K
K
L
L
M
M
N
N
G
G
D
D
E
E
F
F
I
I
J
J
J
J
C
C
J
J
553RH
553TB-18
553TB-24
553TP
553TR
Replacement Parts
Description Part Number
Mounting
Hardware Kit
RA-017
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2016 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-3025 REV B ■ 040416
Installation
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 553TB-18 and 553TB-24 only.
Make sure both centerline
marks are
level.
2a)
Dry Wall Option:
Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 5/16" holes into
wall. Remove brackets and
install anchors.
2b) Stud Option:
Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes into
wall.
3) With mounting brackets in
position, secure to wall using
screws.
4) Hang top of accessory on
mounting bracket. Lower into
position.
5) Secure with set screw.
1
3
3
2
1
2
1
2
1
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Note:
For plaster walls 1/2” thick or
less, insert toggle tool into toggle to
secure behind wall prior to installing
accessory trim.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Symmons 553RH-STN Installation guide

553RH-STN
Symmons
Brand
Symmons
Model
553RH-STN
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents