Printed in U.S.A. © 2005 IHP LLC
P/N 750184M Rev. D 01/2014
2
Slot or Hole on Left
Side of Fireplace
Chain
Screen Assembly
Fireplace
Figure 3 - Attaching Chain
Figure 4 - Completed Installation
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, and prices, and also to discontinue colors, styles, and products. Consult your local
distributor for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Innovative Hearth Products LLC
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION INSTRUC-
TIONS AND CARE AND OPERATION MANUALS PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
TURN OFF THE FIREPLACE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
Step 1. Using a 7/32" allen wrench and 7/16" nut driver, loosely assemble
the parts as shown in Figures 1 and 2 (do not tighten yet).
Step 2. Adjust the L-bracket to the height needed for this installation
(slot allows up to 1-inch vertical adjustment). When satisfied
the screen will stand stable in front of the fireplace, tighten the
nuts on both sides.
Step 3. Place assembled free-standing screen in front of the fireplace,
near the glass door assembly.
Step 4. See Figure 3. Hook the chain to the slot or hole in the left side
of the fireplace modesty panel. Make sure the chain is securely
attached.
Figure 2 - Attaching Legs and L-Brackets to Screen
L- Bracket
Nut
Screen Assembly
Short Spacer
Long Spacer
Contoured Leg Completed
Assembly
(side view)
[FIREPLACE SIDE][FRONT SIDE]
Chain
Long Screw
Short Screw