Astria Fireplaces DRT63 Instruction Sheet

Category
Fireplaces
Type
Instruction Sheet

This manual is also suitable for

750184M
Rev. D 01/2014
HEARTH PRODUCTS
KITS AND ACCESSORIES
Figure 1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
1
Dual Arch Screen
Classic Screen Arch Screen
DECORATIVE FREE-STANDING SCREEN
INSTALLATION INSTRUCTIONS FOR DECORATIVE FREE-STANDING SCREEN KITS
FOR USE WITH DIRECT VENT GAS FIREPLACES
FIREPLACE MODELS: MDLX40, MDLX45, MDLX40-PV, MDLX45-PV, DRT63 40/45, DRC63 40/45, DRT63STE, LSM40ST AND LSM40ST-PV
KIT CONTENTS (See Figure 1)
(1) ea. Screen Assembly (includes attached chain)
(2) ea. Bottom Legs
(2) ea. Long Screws
(2) ea. Short Screws
(2) ea. Long Spacers
(2) ea. Short Spacers
(4) ea. Nuts
(2) ea. L-Brackets
(1) ea. Instruction Sheet
REQUIRED TOOLS
7/32" Allen Wrench
7/16” Nut Driver
GENERAL INFORMATION
These decorative, free-standing screens are designed to enhance the
beauty of the fireplace and create a barrier to prevent direct contact with
the hot glass.
The attached chain is provided to secure the screen to the fireplace, to
help prevent the screen from tipping over.
NOTE: These screens are for INDOOR USE ONLY.
01/13/2014
Decorative Free-Standing Screen Kits
Cat. No. Model Description
H5052 SK-LSM40-2 Classic Screen Kit - 40
H5055 SK-LSM45-2 Classic Screen Kit - 45
H5053 ASK-LSM40-2 Arch Screen Kit - 40
H5056 ASK-LSM45-2 Arch Screen Kit - 45
H5051 DASK-LSM40-2 Dual Arch Screen Kit - 40
H5054 DASK-LSM45-2 Dual Arch Screen Kit - 45
WARNING
Hot! Do not touch! These decorative screen
panels are NOT heat guards.
The glass behind
the screens will be hot during operation
and
will retain heat for a while after shutting off the
appliance
.
Severe burns may result. Carefully
supervise children in the same room as appli-
ance.
As with any similar heating appliance, surfaces of the
frame, the door and appliance can become very hot.
Long Screw
Short Screw
Long Spacer
Nut
L-Bracket
Bottom Leg
Screen Assembly
(Dual Arch Screen shown)
Chain
Short Spacer
Printed in U.S.A. © 2005 IHP LLC
P/N 750184M Rev. D 01/2014
2
Slot or Hole on Left
Side of Fireplace
Chain
Screen Assembly
Fireplace
Figure 3 - Attaching Chain
Figure 4 - Completed Installation
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, and prices, and also to discontinue colors, styles, and products. Consult your local
distributor for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Innovative Hearth Products LLC
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION INSTRUC-
TIONS AND CARE AND OPERATION MANUALS PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
TURN OFF THE FIREPLACE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
Step 1. Using a 7/32" allen wrench and 7/16" nut driver, loosely assemble
the parts as shown in Figures 1 and 2 (do not tighten yet).
Step 2. Adjust the L-bracket to the height needed for this installation
(slot allows up to 1-inch vertical adjustment). When satisfied
the screen will stand stable in front of the fireplace, tighten the
nuts on both sides.
Step 3. Place assembled free-standing screen in front of the fireplace,
near the glass door assembly.
Step 4. See Figure 3. Hook the chain to the slot or hole in the left side
of the fireplace modesty panel. Make sure the chain is securely
attached.
Figure 2 - Attaching Legs and L-Brackets to Screen
L- Bracket
Nut
Screen Assembly
Short Spacer
Long Spacer
Contoured Leg Completed
Assembly
(side view)
[FIREPLACE SIDE][FRONT SIDE]
Chain
Long Screw
Short Screw
  • Page 1 1
  • Page 2 2

Astria Fireplaces DRT63 Instruction Sheet

Category
Fireplaces
Type
Instruction Sheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI