iogear GME435G Quick start guide

GreenPoint Pro 2.4GHz Gyroscopic

Presentation Mouse with Laser Pointer

Quick Start Guide

GME435G

PART NO. Q1289

www.iogear.com

Guía de conﬁguración rápida

Mouse giroscópico para presentaciones

GreenPoint Pro de 2.4 GHz con puntero láser

Guide de démarrage rapide

Souris gyroscopique de présentation de

2.4 GHz avec pointeur laser GreenPoint Pro

1

Package Contents

1 x GME435G GreenPoint Pro Presenter Mouse

1 x USB Wireless Receiver

2 x AAA Batteries

1 x Quick Start Guide

1 x Warranty Card

System Requirements

• USB 2.0 Port

• Windows XP

®

, Windows Vista

®

, Windows

®

7, Windows

®

8

• Mac

®

OS X 10.6 or Later

Specifications

• Laser output power rating 5mW

• Laser class: Class IIIa

• Laser wavelength: 532nm

• Beam diameter: 1mm

Contact

IOGEAR

Toll Free 866-9-IOGEAR (USA)

Phone: 949-453-8782

19641 Da Vinci, Foothill Ranch, CA 92610

www.iogear.com

support@iogear.com

2

Overview

1. Laser Pointer Button

2. Left Mouse Button

3. Mouse Control Button

4. Direction Pad

5. Home Button

6. Help Button

7. LED Indicator

8. Right Mouse Button

9. Enter Button

10. Volume Up Button

11. Volume Down Button

12. ESC Button

13. Page Up/Down/Enter Rocker Button

14. Laser

15. On/Off Switch

16. Battery / Receiver Cover

17. USB Receiver

12

7

1

2

3

4

5

6

8

13

14

15

16

17

9

10

11

AAA

+-

AAA

+-

3

Hardware Installation

1. Remove the battery cover and

remove the USB receiver.

2. Plug the USB receiver into an

available USB port on your

computer.

3. Flip the On/Off Switch on the side

of the GreenPoint Pro to ON.

4. Your GreenPoint Pro Presentation

Mouse is ready to use!

1

2

3

Gyroscopic Mouse Function

1. To turn ON the gyroscopic

mouse movement, press the

mouse control button .

2. Once ON, simply point the

GreenPoint Pro at the screen

and move your cursor with a

flick of your wrist.

3. To calibrate the cursor location

with your point of aim, press

the mouse control button to

turn off mouse movement,

then aim the GreenPoint Pro

at the mouse cursor and press

the mouse control button

again to turn cursor

movement back on.

4. To turn OFF the gyroscopic

mouse movement or to avoid

cursor movement when using

the laser pointer feature,

simply press the mouse

control button .

5. If the computer curser moves

while the mouse is stationary,

please recalibrate it as shown

below.

4

To recalibrate GreenPoint Pro, follow these steps:

1. Place GreenPoint Pro on a flat level surface.

2. Press the Left Mouse and Laser Pointer buttons at the same time.

Keep the GreenPoint Pro as steady as possible when following

this step.

3. Wait for 2 seconds. The LED indicator will flash one time indicating

calibration is complete.

Limited Warranty

FCC Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential setting. This product generates,

uses, and can radiate radio frequency energy and, if not installed and

used as directed, it may cause harmful interference to radio

communications. Although this product complies with the limits for a

Class B digital device, there is no guarantee that interference will not

occur in a particular installation.

CE Compliance

This device has been tested and found to comply with the following

European Union directives: Electromagnetic Capability (2004/108/EC),

Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).

WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING

UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

Warranty Information

This product carries a 3 Year Limited Warranty. For the terms and

conditions of this warranty, please go to http://www.iogear.com/sup-

port/warranty

Register online at http://www.iogear.com/register

Important Product Information

Product Model

Serial Number

Page is loading ...

Especificaciones

• Potencia de salida del laser < 5mW

• La clase de laser: clase IIIa

• Longitud de onda laser: 532nm

• Diámetro del haz: 1mm

Contenido del paquete

1 Mouse para presentaciones GME435G GreenPoint Pro

1 Receptor USB inalámbrico

2 Pilas AAA

1 Guía de configuración rápida

1 Tarjeta de garantía

Requisitos del sistema

• Puerto USB 2.0

• Windows XP

®

, Windows

®

Vista, Windows

®

7, Windows

®

8

• Mac

®

OS X 10.6 o superior

1

Contacto

IOGEAR

Gratis: 866-9-IOGEAR (en EE.UU.)

Teléfono: 949-453-8782

19641 Da Vinci, Foothill Ranch, CA 92610

www.iogear.com

support@iogear.com

SPANISH

Page is loading ...

iogear GME435G Quick start guide

iogear GME435G Quick start guide

in other languages

Related papers

Other documents