Toshiba 24PB1V Owner's manual

Toshiba
Brand
Toshiba
Model
24PB1V
Category
LCD TVs
Type
Owner's manual
LCD Colour TV
OWNER'S MANUAL
Owner's Record
You will find the model number and serial number on
the back of the TV. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your TOSHIBA dealer regarding this product.
Model number:
Serial number:
24PB1E
24PB1T
24PB1V
32PB1E
32PB1T
32PB1V
©2010 TOSHIBA CORPORATION
All Rights Reserved VX1A00187000
TD/J
2
Introduction / Getting started
• YoualsocanusethecontrolsontheTVifthey
havethesamenameasthosereferredtoon
theremotecontrol.
• Pleasereadallsafetyandoperating
instructionsinthismanualcarefully,andkeep
thismanualforfuturereference.
Important Safety Instructions
Besuretoobservethefollowinginstructionsand
precautionstoensuresafeuseofthisTV.
Installation
1)
WARNING: To prevent injury, this apparatus
must be securely attached to the floor/wall in
accordance with the installation instructions.
Install the TV in a horizontal, stable
location. Attach the TV to the stand with
the mounting screw (not supplied on
24PB1 models).
• IftheTVisnotinstalledsecurely,itmaylean
orfalloverandcauseaninjury.
• Topreventinjury,usetheexclusiveoptional
standorwall-hangingbrackettoinstall
thisTVontheoororwallsecurelyin
accordancewithaqualiedtechnician.
Top view
Screw hole
2) Never place the TV in an unstabilized
location such as on a shaky table, incline
or location subject to vibration.
• Onlyusecabinetsorstandsrecommended
bytheTVmanufacturer.
• Onlyusefurniturethatcansafelysupport
theTV.
• EnsurethattheTVisnothangingoverthe
edgeofthesupportingfurniture.
• NeverplacetheTVontallfurniture(for
example,cupboardsorbookcases)without
anchoringboththefurnitureandtheTVtoa
suitablesupport.
• NeverstandtheTVonclothorother
materialplacedbetweentheTVand
supportingfurniture.
TheTVmaydroporfalloff,whichmaycause
aninjuryordamage.
Contents
Introduction / Getting started
Connectinganaerial.............................. 7
ExploringyournewTV........................... 7
TVfrontandsidepanelcontrols............ 7
TVbackpanelconnections.................... 8
Learningabouttheremotecontrol......... 9
TurningtheTVon................................. 10
TuningtheTVforthersttime............. 10
UsingtheQuickMenu.......................... 11
Learningaboutthemenusystem......... 11
WatchingTVprogrammes.................... 12
Programmingchannelsinto
theTV’schannelmemory..................... 12
Selectingthevideoinput
sourcetoview...................................... 14
ChannelList......................................... 14
Using the TV’s features
Pictureadjustment............................... 15
Soundadjustment................................ 18
Otherfeaturessettings......................... 19
Teletext................................................. 20
Connecting your TV
Backconnections................................. 23
ConnectingHDMIorDVIdevices......... 23
SelectingthePC/HDMIAudiomode.... 24
SettingtheHDMIAudiomode.............. 24
Connectingacomputer........................ 25
UsingthePCSettings.......................... 26
UsingtheMediaPlayer........................ 26
Reference section
Troubleshooting.................................... 29
Broadcastsystem................................. 29
Specications....................................... 30
Welcome to Toshiba
•ThankyouforpurchasingthisToshibaLCD
ColourTV.Thismanualwillhelpyouusethe
excitingfeaturesofyournewTV.
• Instructionsinthismanualarebasedonusing
theremotecontrol.
3
Introduction / Getting started
3) Never stand or climb on the TV.
• Educatechildrenaboutthedangersof
climbingonfurnituretoreachtheTVorits
controls.
Beespeciallycarefulinhouseholdswith
childrentopreventthemthroughclimbingon
topoftheTV.Itmaymove,fallover,break,
becomedamagedorcauseaninjury.
4) Always connect the power plug to an
appropriate electrical outlet equipped with
110-240V, AC 50/60Hz.
NeverusetheTVoutsidethespeciedvoltage
range.Itmaycauseareoranelectricshock.
Check!
Ex. 110-240V AC, 50/60Hz
WARNING ABOUT THREE-WIRE
GROUNDING-TYPE PLUG:
• Thisproductshallbeconnectedtoamain
socketoutletwithaprotectiveearthing
connection.
• Neverremovetheearthingpinonthepower
plug.Thissystemisequippedwithathree
pinearthing-typepowerplug.Thisplugwill
onlytanearthing-typepoweroutlet.Thisis
asafetyfeature.Ifyouareunabletoinsert
theplugintotheoutlet,contactanelectrician
toreplacethewalloutlet.
• Neverdefeatthepurposeoftheearthing
plug.
About the fuse (only for E models)
Inathreepinearthing-type,thefusetted
inthisplugisapprovedbyASTAorBSIto
BS1362.Itshouldonlybereplacedbya
correctlyratedandapprovedtypeandthe
fusecovermustberetted.
About the earth (only for 32PB1ETV models)
Anappliancewithprotectiveearthterminal
shouldbeconnectedtoamainsoutletwitha
protectiveearthconnection.
About the use (only for 32PB1ETV models)
• Makesuretoinserttheplugsrmly,when
pluggingtheACpowercordintotheTVset
endandwalloutletend.
• Makesuretoholdtheplug,when
unpluggingtheACpowercord.
• Neveruseothercordexceptforsupplied
ACpowercord,andneverusethesupplied
powercordforanyotherpurpose.
5) Never insert or remove the power plug with
wet hands.
Thismaycauseanelectricshock.
6) Never block or cover the slots and
openings in the cabinet.
• NeverplacetheTVsothatitisfacing
upwardoronitsside.
• NeverplacetheTVinacloset,bookcaseor
othersimilarareawheretheventilationis
poor.
• Neverdrapeanewspaper,tableclothor
curtainontheTV.
• WheninstallingtheTVagainstawall,
alwayskeeptheTVatleast10cmaway
fromthewall.
• NeverplacetheTVonasoftunstable
surface,suchasacarpet,oracushion.
TheinsideofthisTVwilloverheatifthe
ventilationholesarecovered,blockedor
sealed,whichmayresultinare.
7) Never place the TV near a heater or in
direct sunlight.
Thesurfaceofthecabinetorpowercordmay
meltandresultinareoranelectricshock.
4
8) Never place the TV in an area exposed to
high humidity levels, such as in a bathroom
or close to a humidifier.
Thismaycauseareoranelectricshock.
9) Never place the TV next to a stove where it
will be exposed to oil, smoke, or steam, or
in a location where there is a large quantity
of dust.
Thismaycauseareoranelectricshock.
10
) Precautions for moving the TV
• WhenmovingtheTV,besuretoremovethe
plugfromthewalloutletanddisconnectthe
aerialcableandaudio/videocables,any
steadytiesandmountingscrew.Areoran
electricshockmayresultifthepowercordis
damaged.
• WhencarryingtheTV,atleasttwopeople
areneeded.Besuretocarryitupright.
• NevercarrytheTVwiththescreenfacingup
ordown.
11)
Precautions for installing on outdoor aerial
Anoutsideaerialsystemshouldnotbelocated
inthevicinityofoverheadpowerlines,orother
electriclightorpowercircuits.
Iftheaerialfallsdownordrops,itmaycause
aninjuryoranelectricshock.
Introduction / Getting started
Use
1) Never place hot objects or open flame
sources, such as lighted candles or
nightlights, on or close to the TV.
Hightemperaturescanmeltplasticandleadtores.
2) The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Whenliquidsarespilledorsmallitemsare
droppedinsidetheTV,thismaycauseareor
anelectricshock.
IfsmallobjectsdropinsidetheTV,turnoffthe
TVandremovethepowerplugfromtheoutlet
immediatelyandcontactaservicetechnician.
3) Never insert objects (metal or paper)
or pour water inside the TV through
ventilation holes and other openings.
Theseitemsmaycauseareoranelectric
shock.Iftheseobjectsareinsertedinsidethe
TV,turnofftheTVandremovethepowerplug
fromtheoutletimmediatelyandcontacta
servicetechnician.Beespeciallycarefulthat
childrendonotinsertobjectsintheTV.
Clip
4) When the TV will not be used for a long
period of time, such as during vacation or
travel, remove the power plug from the wall
outlet for safety.
• TheTVisnotcompletelydisconnectedfrom
thepowersupplyline,asminutecurrentis
consumedevenwhenthe1Powerswitchis
turnedoff.
5
• TheMainsplugoranappliancecoupleris
usedasthedisconnectdevice,therefore
thedisconnectdeviceshallremainreadily
operable.
5) Never pull on the power cord when
removing the plug from the wall outlet.
Alwaysholdtheplugrmlywhenremoving
it.Ifthepowercordisyanked,thecordmay
becomedamagedandareoranelectric
shockmayoccur.
6) Never cut, break, modify, twist, bunch up or
bent the cord or apply excessive force or
tension to it.
Neverplaceheavyobjectsonthecordorallow
ittooverheatasthismaycausedamage,a
reoranelectricshock.Contactaservice
technicianifthepowercordisdamaged.
7) If there is thunder or lightning, never touch
the aerial cable or other connected cables.
Youmaysufferanelectricshock.
Service
1) Never repair, modify or disassemble the TV
by yourself.
Itmaycauseareoranelectricshock.
Consultaservicetechnicianforinspectionandrepairs.
2) When a malfunction occurs, or if smoke or
an unusual odor comes from the TV, turn
off the TV and remove the power plug from
the outlet immediately.
Makesurethatthesmokeorsmellhas
stopped,thencontactaservicetechnician.
IftheTVisstillusedinthiscondition,itmay
causeareoranelectricshock.
3) If the TV is dropped or the cabinet is
broken, turn off the TV and remove the
power plug from the outlet immediately.
IftheTVhaspowerinthiscondition,itmay
causeareoranelectricshock.Ifthecabinet
isbroken,becarefulwhenhandlingtheTVto
preventaninjury.
Contactaservicetechnicianforinspectionandrepair.
4) When the TV reaches the end of its useful
life, ask a qualifi ed service technician to
properly dispose of the TV.
Note:
Thelampunitcontainsasmallamountof
mercury.Disposalofmercurymayberegulated
duetoenvironmentalconsiderations.
Disposeoftheusedlampunitbytheapproved
methodforyourarea.Fordisposalorrecycling
information,pleasecontactyourlocalauthorities.
Introduction / Getting started
6
Cleaning
1) Remove the power plug before cleaning.
Neverusesolventssuchasbenzineorthinner
tocleantheTV.
• Thesesolventsmaydistortthecabinetor
damageitsnish.
• Ifrubberorvinylproductsremainincontact
withtheTVforalongtime,astainmay
result.
Ifthecabinetbecomesdirty,cleanitwitha
soft,drycloth.
WhencleaningthesurfaceoftheLCDdisplay,
wipethepanelsurfacegentlywithasoft,dry
cloth.
2) Periodically disconnect the power plug
from the outlet and check it.
If dust has collected on the power plug
connectors, clean off the dust with a dry
cloth.
Thisdustmaycauseareduetoreduced
insulationontheplug.
Clean here
Important information
1) About LCD screen
• IfyouhavetheLCDscreenfacingtothe
sun,theLCDscreenwillbedamaged.Be
awareoflocatingtheTVclosetoawindow
oroutdoors.
• NeverpresstheLCDscreenstronglyor
scratchit,andneverputanythingonit.
TheseactionswilldamagetheLCDscreen.
2) About cabinet and LCD screen
Neversprayvolatilecompoundssuchas
insecticideonthecabinetandLCDscreen.
Thismaycauseadiscolourationordamage
thecabinetandLCDscreen.
3) Some pixels of the screen do not light up
TheLCDdisplaypanelismanufactured
usinganextremelyhighlevelofprecision
technology,howeversometimessome
pixelsofthescreenmaybemissingpicture
elementsorhaveluminousspots.Thisisnot
signofmalfunction.
4) About Interference
TheLCDdisplaymaycauseinterference
inimage,sound,etc.ofotherelectronic
equipmentthatreceiveselectromagnetic
waves(e.g.AMradiosandvideoequipment).
5) About using under the low temperature
places
IfyouusetheTVintheroomof0°Corless,
thepicturebrightnessmayvaryuntilthe
LCDmonitorwarmsup.Thisisnotasignof
malfunction.
6) About afterimage
Ifastillpictureisdisplayed,anafterimage
mayremainonthescreen,howeveritwill
disappear.Thisisnotasignofmalfunction.
Exemptions
• Toshibaisnotliableforanydamagecaused
byres,naturaldisaster(suchasthunder,
earthquake,etc.),actsbythirdparties,
accidents,owner’smisuse,orusesinother
improperconditions.
• Toshibaisnotliableforincidentaldamages
(suchasprotlossorinterruptioninbusiness,
modicationorerasureofrecorddata,etc.)
causedbyuseorinabilitytouseofproduct.
• Toshibaisnotliableforanydamagecaused
byneglectoftheinstructionsdescribedinthe
owner’smanual.
• Toshibaisnotliableforanydamagecausedby
misuseormalfunctionthroughsimultaneous
useofthisproductandtheconnected
equipment.
Trademark Information
• HDMI,theHDMIlogo,andHigh-Denition
MultimediaInterfacearetrademarksor
registeredtrademarksofHDMILicensingLLC
intheUnitedStatesandothercountries.
Introduction / Getting started
Connecting an aerial
Optimumreceptionofcolourrequiresagood
signalandwillgenerallymeanthatanoutdoor
aerialmustbeused.
Theexacttypeandpositioningoftheaerialwill
dependuponyourparticulararea.
YourToshibadealerorservicepersonnelcan
bestadviseyouonwhichaerialtouseinyour
area.
Beforeconnectingtheaerialcable,turnoffall
mainpowerswitches.
IN
OUT
VHF and/or
UHF aerial
300 7 twin-lead feeder
75 7
aerial
terminal
Aerial adaptor
(not supplied)
Aerial cable (75 7 coaxial)
(not supplied)
75 7 aerial
terminal
75 7 coaxial cable
Plug
(not supplied)
Media Recorder
TV back view
Exploring your new TV
Installing the remote control batteries
Removethebatterycover.
InserttwoR03(AAA)batteriesmatchingthe–/+
polaritiesofthebatterytothe–/+marksinside
thebatterycompartment.
Introduction / Getting started
Cautions:
• Dispose of batteries in a designated disposal
area. Batteries must not be exposed to
excessive heat such as sunshine, fire or the
like.
• Attentionshouldbedrawntotheenvironmental
aspects of battery disposal.
• Nevermixbatterytypesorcombineused
batterieswithnewones.
Notes:
• If the remote control does not operate correctly,
or if the operating range becomes reduced,
replacebothbatterieswithnewones.
• Ifthebatteriesaredeadorifyouwillnotuse
the remote control for a long time, remove the
batteries to prevent battery acid from leaking
into the battery compartment.
Effective range
within 5 m
TV front and side panel controls
• YoucanoperateyourTVusingthebuttonson
thesidepanelortheremotecontrol.Theback
ofthepanelprovidetheterminalconnections
toconnectotherequipmenttoyourTV(-
“ConnectingyourTV”pages23–28).
• Fortheuseofeachcontrol,seethepagesin
brackets.
8
Introduction / Getting started
TV front view
7
Left side view
Point the
brightness sensor
(- page 18).
1
2
3
4
5
6
USB
1 1 (power on/standby)—Presstoturnthe
TVon/standby(- page10).
2 pBb (programme position)—Whenno
menuisonscreen,thesebuttonsselectthe
programmeposition.(-page12).
U u(MENU up/down)—Whenamenuis
on-screen,thesebuttonsfunctionasup/
downmenunavigationbuttons(exceptfor
theinputsourceselection)(-page11).
3 2–+(volume)—
Whennomenuison-
screen,thesebuttonsadjustthevolumelevel.
I i(MENU left/right)—Whenamenuis
on-screen,thesebuttonsfunctionasleft/right
menunavigationbuttonsoradjustsettings
(-page11).
4 MENU—Presstoaccessthemenusystem
(-page11).
RETURN—Whenamenuison-screen,
thisbuttonwilltakeyoubacktotheprevious
menu(-page12).
5 o (input source selection)—Whenno
menuisonscreen,thisbuttonselectsthe
inputsource(-page14).
OK—Whenamenuison-screen,this
buttonwillmakeaselectionortakeyouto
thenextavailablemenulayer(-page11).
TV back panel connections
RGB/PC
VIDEO
AUDIO
R L
/
MONO
AUDIO
R L
/
MONO
Y
P
R
/C
R
P
B
/C
B
1 2 3 4
PC/
HDMI1
(
AUDIO
)
1
2
AUDIO
(
FIXED
)
COMPONENT VIDEO INPUT
USB
Cable holder
*
RGB/PC
AUDIO
R L
/
MONO
Y
P
R
/C
R
P
B
/C
B
PC/
HDMI
(
AUDIO
)
AUDIO
COMPONENT / VIDEO INPUT
(
FIXED
)
VIDEO
Power cord
*
13
12
11
8
10
9
Cable holder
*
Power cord * (only for 32PB1 models)
* Make sure to insert the plugs firmly, when
plugging the AC power cord into the TV set end
and wall outlet end.
* Make sure to hold the plug, when unplugging
the AC power cord.
* Never use other cord except for supplied AC
power cord, and never use the supplied power
cord for any other purpose.
* The exact power cord will vary according to the
country.
Cable holder *
* You can use the cable holder to hold the aerial
cable, video and audio cables etc.
Never grasp the holder when moving the TV.
6 USB (input terminal)—InsertyourUSB
storagedeviceheretoviewphotos(JPEG)
(-page27).
7 1 (power LED)—Powerindicator
(-page10).
8 o HDMI (input terminal)—High-Denition
MultimediaInterfaceinputreceivesdigital
audioanduncompresseddigitalvideofrom
anHDMIdeviceoruncompresseddigital
videofromaDVIdevice(-pages24,25).
Introduction / Getting started
9
o PC/HDMI (AUDIO) (input terminal)—PC
audioinputterminalissharedwithHDMI
analogueaudioinputterminal,andtheiruse
canbeconguredintheSETUPmenu(-
pages24,25).
10 A (aerial input terminal)—Analogueaerial
signalinput(-page7).
11 o RGB/PC (input terminal)—Foruse
whenconnectingapersonalcomputer(PC)
(-page25).
12 O AUDIO (output terminals)—Standard
audiooutputs(FIXED)(-page23).
13 o COMPONENT / VIDEO INPUT (input
terminals)—High-denitioncomponent
videoandstandard(analogue)stereoaudio
inputs,orstandard(composite)videoand
standardstereoaudioinputs(-page23).
Learning about the remote control
Location of controls
1 PictureSize(-page15)
2 Subtitleon/off(-page21)
3 Inputsourceselection(TV,VIDEOor
COMPONENT,HDMI,PC)(-page14)
4 Poweron/Standby(-page10)
5 Picturestill(-page16)
6 Stereo/Bilingualselection(-pages18,19)
7 Numberbuttons(0-9)(-pages12,19,21)
8 TodisplaytheChannelList(-page14)
9 Toreturntothepreviousprogramme(-
page12)
10 •
Todisplayon-screeninformation
(-page12)
•
Initial/IndexfunctionforTeletext
(-page22)
11 SoundMute(Thisbuttonturnsthesoundoff/
on.)
12 ProgrammepositionUu(-page12)
13 Volume–+(Thesebuttonsadjustthevolume
level.)
14 EXIT(-page12)
15 ToaccesstheQuickMenu(-page11)
16 Teletexton/SuperimposeTeletext/off
(-page21)
17 •Menursvw(-page11)
•OK(-page11)
18 Toreturntothepreviousmenu(-page12)
19 MENU(-page11)
20 Teletextcontrolbuttons(Fourcoloured
buttons:Red,Green,Yellow,Blue)
(-pages21,22)
21 Torevealconcealedtext(- page22)
22 •Toselectapagewhileviewinganormal
picture(-page22)
•Toselectthetimedisplay(-page22)
23 Toholdawantedpage(-page22)
24 Toenlargetheteletextdisplaysize
(-page22)
21
4
6
8
10
12
14
16
18
20
22
24
5
7
9
11
13
15
17
19
21
23
3
10
Introduction / Getting started
Turning the TV on
Switching on the TV
Connectthepowercordtoawalloutlet,the
1powerindicatorlightsinred(standbymode).
1 Press
ontheremotecontrolorontheTV
leftsidepanel,the1powerindicatorlightsin
green.
Note:
Ifyouwatchblackandwhiteprogrammeswhen
the Colour SystemmodeissettoAuto,colour
noise may appear on the screen. In this case
select the appropriate Colour System (For the
system of each country or region, refer to pages
13, 31).
Switching off the TV
1 Press
ontheremotecontrolorontheTV
leftsidepaneltoswitchtothestandbymode.
Notes:
• WhentheTVwillnotbeusedforalongperiod
of time, such as during vacation or travel,
removethepowerplugfromthewalloutlet.
• TheTVwillautomaticallyturnitselfoffafter
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcastfortheday.Thisfunctiondoesnot
workinexternalinputorBluescreenOffmode.
TheTVwillautomaticallyturnitselfoffafter
approximately 2 hours if you do not operate the
TVafterturnedonbyontimerfunction.
• IfpoweriscutoffwhileyouareviewingtheTV,
the Last Mode Memory function turns on the
TVautomaticallywhenpowerisappliedagain.
Ifpowerisgoingtobeoffforalongtimeand
youaregoingtobeawayfromyourTV,unplug
thepowercordtopreventtheTVfromturning
on in your absence.
Tuning the TV for the first time
BeforeswitchingontheTV,putyourdecoderand
mediarecordertostandby,iftheyareconnected,
andensurethattheaerialisconnected.Tosetup
theTV,usethebuttonsontheremotecontrolas
detailedonpage9.
1 Pressthe
button.TheQuick Setup
screenwillappear.Thisscreenwillappear
thersttimethattheTVisswitchedon.
Quick Setup
Language English
2 Pressv orwtoselectthemenulanguage
(English,Chinese(CS),Malay,Thai,
Vietnamese,Russian,Arabic,Persianor
French).
3 PressQ,todisplaytheLocationmenu(-
page13).
Pressv orwtoselectStoreorHome.For
normalhomeuse,selectHome.
Location
Home
To use the TV for displaying in
a store showroom, please select [Store].
[Home] mode is recommended
for normal use.
Store mode:
AutoViewmenuisnotavailable.
4 PressQtodisplaytheAutoViewmenu(-
page16).
Pressv orwtoselectYesorNo.
AutoView
Yes
AutoView mode automatically
adjusts picture settings to suit
ambient light conditions. Do you
wish to enable AutoView mode?
5 PressQtodisplaytheAuto Signal Booster
menu(-pages12,13),andthenv orwto
selectYesorNo.
Auto Signal Booster
Yes
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode:
Thisfunctionperformsautomaticdistinction
ofOnorOff.
6 PressQtodisplaytheAuto Tuningstartup
screen.PressQtostarttheautomatic
search.
Auto Tuning
Progress
Found
1% 0
Whentheautomaticsearchiscompleted,
theTVwillautomaticallyappeartheManual
Tuningmenu(-page13).
Introduction / Getting started
1
Manual Tuning
Pos. Label
2
3
4
5
6
7
8
7 ClosingtheQuick Setupmenu,pressEXIT.
Note:
TheQuick Setup menu can also be display at
any time from the SETUP menu.
Using the Quick Menu
Quick Menuhelpsyouaccesssomeoptions
quickly,suchasPicture Mode,Picture Size,
Sleep Timeretc.
PressQUICKtodisplaytheQuick Menuand
usesorrtoselecttheoption.
Quick Menu
Picture Mode
Picture Size
Sleep Timer
Media Player
Bass Boost
Super Live
00:00
Off
On
Dynamic
Signal Booster
Note:
Quick Menu items are different depending on
the current mode.
Mode Quick menu item Description
Whenviewinga
TVprogrammeor
picturesfromthe
externalinput
PictureMode
-page16.
PictureSize
-page15.
SleepTimer
-page19.
MediaPlayer
-page27.
BassBoost
-page19.
SignalBooster
-page13.
WhenusingMedia
Player(PhotoView)
IntervalTime
-page27.
Repeat
-page27.
Learning about the menu system
Wesuggestyoufamiliarizeyourselfwiththe
displaychartsbeforeusingthemenusystem:
• PressMENUtodisplaymenu,thenpressvor
wtoselectmainmenuheadings.
• Presssorrtoselectanitem.
• Pressvorwtoselectoradjustsetting.
• PressQtodisplaythenextmenu.
Displaying the menu chart
SETUP
Language
Auto Tuning
Manual Tuning
Manual Settings
AV Connection
PC Settings
Picture Position
Quick Setup
Location
English
Home
PICTURE
Picture Settings
3D Colour Management
Base Colour Adjustment
Active Backlight Control
Auto Brightness Sensor
Noise ReductionNoise Reduction
Off
On
TIMER
Sleep Timer
On Timer
On Timer Position
0 0 : 0 0
0 0 : 0 0
01
SOUND
MTS
Dual
Bass
Treble
Balance
Advanced Sound Settings
Stable Sound
Dual 1
Auto
Off
0
0
0
FUNCTION
Media Player
Teletext
Teletext Language
Panel Lock
Automatic Power Down
Auto
1
Off
Off
Auto Format
4:3 Stretch
Blue Screen
Side Panel
On
Off
On
1
PICTURE
SOUND
SETUP
TIMER
FUNCTION
12
Notes:
• Inthevideoinputmode(VIDEO,COMPONENT
and HDMI), Auto Tuning and Manual Tuning
are not available. Instead, Manual Settings
appears in the SETUP menu (- page 20).
• Ifyouconnectexternalequipmentvia
component video source to external input,
Colour System selection in the Manual
Settings menu is not available.
• Ifyoudonotmakeaselectionforawhile,the
menu display disappears automatically.
• Ifyouwanttoclosethemenudisplayinstantly,
press EXIT or MENU.
• Toreturntothepreviousmenu,pressRETURN.
• InthePCinputmode,PC Settings appears in
the SETUP menu (- page 26).
• Inthe480i,576ior1080iinputsignalsmode,
you can select the Cinema Mode in the
Picture Settings menu (-page17).
• Whenyouusethecolourmanagementfunction
(-page18),youcanselecttheBase Colour
Adjustment in the PICTURE menu.
Watching TV programmes
Selecting the menu language
Choosefrom9differentlanguages(English,
Chinese(CS),Malay,Thai,Vietnamese,Russian,
Arabic,PersianorFrench)fortheon-screen
display.
1 PressMENU,thenpressv orwtodisplay
SETUPmenu.
2 Presssorr toselectLanguage.
3 Pressv orwtoselectthedesiredlanguage.
Changing the position
1 Enterthedesiredpositionnumberusingthe
Numberbuttonsontheremotecontrol.
Forpositionsbelow10,use0andthe
requirednumbere.g.,forposition1.
2 YoucanalsochangethepositionbyusingPU
orPu.
Thepositionwillbedisplayedonthescreen
withtheMono/Stereo/Dualaudiostatus.
Note:
Changingpositionsbetweendifferentformat
channels takes several seconds.
Switching between two positions
Youcanswitchtwopositionswithoutentering
actualpositionnumbereachtime.
1 Selecttherstpositionyouwanttoview.
2 SelectthesecondpositionwiththeNumber
buttons(0-9).
3 Press .Thepreviouschannelwillbe
displayed.
2 EFGH
3 IJKL Dual
Eachtimeyoupress ,theTVwillswitchback
andforthbetweenthetwopositions.
Displaying the on-screen information
1 Press todisplaythefollowingon-screen
information.
4 ABCD
Theinformationwilldisappearin6seconds.
•Positionorexternalinputmodeselected
•Positionskipon/offinformation
•Label(ifset)
•Mono/Stereo/Dualaudiostatus
2 Toerasethedisplayinstantly,press again.
Programming channels into the TV’s
channel memory
• First,usetheAuto Tuningfunctiontopresetall
theactivechannelsinyourareaautomatically.
Then,arrangethepresetchannelswiththe
Manual Tuningfunctionsothatyoucantune
intoonlydesiredchannels.
• UsetheManual Tuningoperationifdesired
channelscannotbepresetwiththeAuto
Tuningorifyouwouldliketopresetchannels
tospecicpositionnumbersonebyone.
Auto Tuning
1 FromtheSETUPmenu,presssorrto
selectAuto Tuning.
2 PressQtodisplaytheAuto Signal Booster
menu(-pages10,13),pressv orwto
selectYesorNo.
Introduction / Getting started
Introduction / Getting started
3 PressQtodisplaytheAuto Tuningmenu.
Auto Tuning
Previous settings will be Lost!
Press EXIT for no change.
Press OK key to start auto tune.
4 PressQtostarttheautomaticsearch.
Thesearchwillbeginforallavailablestations.
5 Whentheautomaticsearchiscompleted,
theTVwillautomaticallyappeartheManual
Tuningmenu.
6 ClosingtheAuto Tuningmenu,pressEXIT.
Note:
Whenyoupresetthechannelwhichsound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctlyiftheradiowavestransmitbadly.Atthat
time, preset the channel by Manual Tuning.
ThecountriessuchasMyanmar,Brazil,Chile,
Colombiaapplytothiscase.Seepage29for
more details.
Manual Tuning
1 FromtheSETUP menu,presssorrto
selectManual Tuning.
2 PressQtodisplaytheManual Tuning
menu.
Presssorrtoselecttheprogramme
positionyouwanttoarrange.
3 PressQtodisplaythebreakdownmenu.
Pressv orwtoselectanitem,thenpresss
orrtoselecttheitemasshownbelow.
Manual Tuning
Position
0
1 B/G A 0
On
A C E G
H
FDB
A. Position selection
B. System (Sound) (- page 29)
C. Colour System (- page 29)
A:Automatic(factoryset),P:PAL,
S:SECAM,4:NTSC4.43(MHz),
3:NTSC3.58(MHz)
Ifthecolourofacertainchannelis
abnormal,theautomaticcoloursystem
selection(A)mayhavemalfunctioned,or
soundsystemselectioniswrong.Insuch
acase,selectanothercolourand/orsound
system(-page29).
D. Position skip selection
Presssorrtoturnthepositionskip
optionon“8”oroff“(”.
Thepositionwillthenbeskippedwhenyou
selectchannelswithPUorPu.
The“8”markwillappearbesidea
positionnumberwhenyouusethe
Numberbuttonontheremotecontrol.
E. Channel search operation
Pressrtosearchupthebandorsto
searchdowntheband.
Presssorrrepeatedlyuntilyourdesired
channelisdisplayed.
Whenastationisfound,itwillbe
displayed.
NEVERPRESSANYOTHERBUTTONS
WHILETHESETISTUNING.
F. Manual Fine Tuning
Presssorruntilbetterpictureand
soundareobtained.
G. Signal Booster
Ifthereceivingsignalisweak/strongand
thepictureisnoisy,thepicture maybe
improvedwhenusingthisfunction.
PressthesorrtoturntheSignal
BoosterOnorOff.
H. Label
Stationlabelsappearunderthe
programmepositiondisplayeachtimeyou
turnontheTV,selectachannel,orpress
.
To change or create station labels:
1) Presssorrrepeatedlytoselecta
characterfortherstspace,thenpress
v orw.
*(blank space)
2) Repeatstep1)toentertherestofthe
characters.Ifyouwouldlikeablank
spaceinthelabelname,youmust
chooseablankspacefromthelistof
characters.
PressQtostoreyoursettings.
Setting the Location
YoucanselecteitherHomeorStoremode.
Homeisrecommendedfornormalhomeuse.
SelectStorewhenusingaTVfordisplayingina
shop,etc.
1 FromtheSETUP menu,presssorrto
selectLocation.
2 Pressv orwtoselectHomeorStore.
14
Sorting positions
• TheTViscapableofreceivinganumberof
differentchannelsdependinguponwhereyou
live.
• Sortingprogrammepositionisaneasyway
ofstoringeachchannelontheprogramme
positionofyourchoice.
Ex.:ToswapchannelABCD(Prog.1)forchannel
MNOP(Prog.4):
1 FromtheSETUP menu,presssorrto
selectManual Tuningmenu,andthenpress
Q.
2 PresssorrtoselectthechannelABCD,
thenpressw.
1 ABCD
EFGH
IJKL
MNOP
Manual Tuning
Pos. Label
2
3
4
5
6
7
8
3 Pressstoselectthenewposition“4”,then
pressv.
4 PressrtoselectthechannelMNOP,then
pressw.
5 Pressrtoselectthenewposition“1”,then
pressv.
6 ConrmnewManual Tuningmenu.
Selecting the video input source to view
1 Press ontheremotecontroluntil
thevideoinputmodelistappearsonthe
screen,thenpresss,ror toselect
appropriateinputsource(orpressoonthe
TVleftsidepaneltoselectrequiredinput
sourcedirectly).
HDMI
TV
VIDEO
Inputs
PC
2 PressQ.
TV(analogueaerialinput),
VIDEO(oCOMPONENT/VIDEOINPUT,
standardorcomponentvideoinput),
HDMI(HDMIinput),
PC(oRGB/PC,PCinput)
Introduction / Getting started
Setting the Manual Settings menu
1 FromtheSETUPmenu,pressvorwto
selectManual Settings,andthenpressQ.
2 Pressvorwtoselectanitem,andthen
presssorrtoselecttheitemasshown
below.
Manual Settings
Colour System : Auto
VIDEO
A
A B
A. Colour System
ConrmthatColour Systemissetto“A”
(Auto).Ifnot,select“A”withsorr.
Note:
OnlyVIDEOsignalinput,thisfunctionis
available.
B. Label
Thelabelallowsyoutolabeleachinput
sourceforyourTV.
To change or create labels:
1) Presssorrrepeatedlytoselecta
characterfortherstspace,thenpress
vorw.
*(blank space)
2) Repeatstep1)toentertherestofthe
characters.Ifyouwouldlikeablank
spaceinthelabelname,youmust
chooseablankspacefromthelistof
characters.
PressQtostoreyoursettings.
Channel List
1 Pressthe button.TheChannel Listwill
appear.
2 Presssorrtoselectachannel,andpress
Qtowatch.
Using the TV’s features
Picture adjustment
• Mostofthepicturecontrolsandfunctionsare
available.Howeverfeaturesnotavailablewillbe
greyedout.
Selecting the Picture Size
1 Press untilthePicture Sizelistappears
onthescreen,thenpresssorrtoselect
theappropriatePicture Size(orpress
repeatedlytoselectthedesiredPicture Size
directly).
AV format
Native
Picture Size
Wide
4:3
Super Live
Cinema
Subtitle
14:9
2 PressQ.
Wide
Usethissettingwhenwatchingawide-screen
DVD,widescreenvideotapeora16:9broadcast
(whenavailable).Duetotherangeofwide-
screenformats(16:9,14:9,20:9etc.),youmay
seebarsonthetopandbottomofthescreen.
4:3
Usethissettingtoviewatrue4:3broadcast.
Super Live
Thissettingwillenlargea4:3imagetotthe
screenbystretchingtheimagehorizontallyand
vertically,holdingbetterproportionsatthecentre
oftheimage.Somedistortionmayoccur.
Cinema
Whenwatching“allsidespanelformat”lms/
videotapes,thissettingwilleliminateorreduce
theblackbarsonallthesidesofthescreen
byzoominginandselectingtheimagewithout
distortion.
Subtitle
Whensubtitlesareincludedonaletterboxformat
broadcast,thissettingwillraisethepictureso
thatthemostoftextisdisplayed.
Subtitle
14:9
Usethissettingwhenwatchinga14:9broadcast.
Native
Thissettingwilldisplaytheimagecorrectly
withoutdistortionorpictureclipping.
PC Normal
UsethissettingforPCconnectedviaHDMI
orRGB/PCterminalwhenreceivingPCsignal
format.Thissettingwilldisplaytheimage
correctlywithoutdistortionorpictureclipping.
PC Wide
UsethissettingforPCconnectedviaHDMI
orRGB/PCterminalwhenreceivingPCsignal
format.Thissettingwilldisplaytheimagewithout
pictureclipping.
16
Using the TV’s features
Dot by Dot
“DotbyDot”isanon-scalingdisplay.Depending
ontheinputsignalformat,thepictureis
displayedwithsidepanelsand/orbarsatthetop
andbottom(i.e.VGAinputsource).
Notes:
• InthePCconnectedviaHDMIorRGB/
PCterminal(- page26),thepicturesize
selection is PC Wide, PC Normal or Dot by
Dot only.
• Usingthespecialfunctionstochangethe
sizeofthedisplayedimage(e.g.changingthe
height/widthratio)forthepurposeofpublic
display or commercial gain may infringe on
copyrightlaws.
• Iftheaspectratiooftheselectedformatis
differentfromtheoneoftheTVtransmission
or video programme, it can cause a difference
invision.Changetothecorrectaspectratio
picturesize.
• WhenusingthePCconnectedviaHDMIor
RGB/PCterminal,themovingimagequality
may be deteriorated.
Using the picture still
• Press tofreezethepicture.
EvenifanimageisfrozenontheTVscreen,the
picturesarerunningontheinputsource.Audio
continuestobeoutputaswell.
Toreturntoamovingpicture,press again.
(Moving) (Still)
Note:
If you use this function except for the purpose of
yourprivateviewingandlistening,itmayinfringe
thecopyrightprotectedbythecopyrightlaws.
Adjusting the Picture Position
Adjustmenttothepositionofthepicturemaybe
madetosuityourviewingpreferences.
1 FromtheSETUP menu,presssorrto
selectPicture Position.
2 PressQ,thenpresssorrtoselectthe
itemyouwanttoadjust.
Picture Position
Horizontal Position
Vertical Position
Reset
0
0
3 Pressvorwtoadjustthesettingsasdesired.
Horizontal Position
0
Notes:
• WhenthepicturesizeisinWideor4:3mode,
onlytheHorizontalpositioncanbeadjusted.
• WhenthepicturesizeisinNative, PC Wide,
PC Normal and Dot by Dot mode, none of this
functionwillbeavailable.
Resetting the Picture Position
ThisfunctionresetsyourPicture Position
settingstothefactorysettings.
1 FromthePicture Positionmenu,presssor
rtoselectReset.
2 PressQ.
Activating the Picture Mode
ThisTVoffersthechoiceofpersonalisingthe
picturestyle.
AutoView, Dynamic,Standard, Mild, Movie,
Eco Mode 1, Eco Mode 2,GameandPCare
presetoptionsandaffectmanyfeatures/settings
withintheTV.
Notes:
• BecausetheAutoView mode automatically
adjustspicturesettingsbasedonambientlight
conditions, the Auto Brightness Sensor is
greyedoutwhenitisselected.
• IfusingEco Mode 1 or Eco Mode 2willbe
changedthedarkscreen,andyouwillbeable
toreducepowerconsumption.
TheEco Mode 2 is effect better than the Eco
Mode 1.
TheBacklight mode is not available in the Eco
Mode 1 or the Eco Mode 2.
• Game mode is available in external input mode
(otherthanaerialinput).Whenyouselect
Gamemode,suitablewidescreenformatswill
be selected.
Using the TV’s features
• PCmodeisavailableinRGB/PCinputmodeor
HDMI input mode.
1 FromthePICTUREmenu,presssorrto
selectPicture Settings.
2 PressQ,thenpresssorrtoselect
Picture Mode.
Picture Settings 1/2
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Black/White Level
Dynamic
High
100
50
50
0
0
100
3 Pressvorwtoselectthepicturemodeyou
preferandpressQ.
Activating the picture preferences
Youcancustomisecurrentpicturemode
settingsasdesired.Forexample,whileselecting
"Dynamic,"ifyouchangethefollowingitems,
suchasPicture Settingsitems,yournewsetting
issavedasDynamic-user.
1 FromthePicture Settingsmenu,presss
orrtoselecteitherBacklight,Contrast,
Brightness,Colour,TintorSharpnessand
pressQ.
2 Pressvorwtoadjustthesettings.
Setting the Black/White Level
Black/White Levelimprovesthecontrastofthe
picture.
1 FromthePicture Settingsmenu,presssor
rtoselectBlack/White Level.
2 PressvorwtoselectHigh, Off, Lowor
Middle.
Using the Cinema Mode
Amovielm’spicturerunsat24framesasecond,
whereasmoviesoftwaresuchasDVD,etc.,that
youenjoywatchingonTVathomerunsat30
(NTSC)or25(PAL)framesasecond.Toconvert
thissignaltoreproduceasmoothmotionand
picturequality,selecttheOnmode.
Effective signal and setup conditions:
• WhentheVideoinputmodeisselected.
• Whentheinputsignalformatis480i,576ior
1080isignals.
1 FromthePicture Settingsmenu,presssor
rtoselectCinema Modeonthe2ndpage.
Picture Settings 2/2
Cinema Mode
Colour Temperature
Reset
Off
2 PressvorwtoselectOnorOff.
Note:
WhenaDVDmoviewithsubtitleisplayingback,
thismodemaynotworkcorrectly.
Adjusting the Colour Temperature
Colour Temperatureincreasesthewarmthor
coolnessofthepicturebysettingthered,green
orbluetint.
1 FromthePicture Settingsmenu,presssor
rtoselectColour Temperatureonthe2nd
page,thenpressQ.
2 PressvorwtoselectCool, Natural,orWarm
tosuityourpreference.
Colour Temperature
Colour Temperature Cool
Red Level
Green Level
Blue Level
0
0
0
3 PresssorrtoselectRed Level, Green
LevelorBlue Level,thenpressvorwto
adjustthesettingasrequired.
Resetting the Picture Settings
1 FromthePicture Settingsmenu,presss
orrtoselectResetonthe2ndpage,then
pressQ.
Activating the Noise Reduction (NR)
IfthereceivingsignalofMPEGisamosquito
(grained)noisedependingonthecompression
andconversion,thepictureisweakandthe
pictureisblurry,thepicturemaybeimproved
whenusingthisfunction.
1 FromthePICTUREmenu,presssorrto
selectNoise Reduction,andthenpressQ.
Noise Reduction
Auto NR On
MPEG NR Auto
DNR Auto
18
Using the TV’s features
1 FromthePICTUREmenu,presssorrto
selectActive Backlight Control.
2 PressvorwtoselectOnorOff.
Activating Auto Brightness Sensor
WhentheAuto Brightness Sensorisactivated,
itwillautomaticallyoptimisethebacklighting
levelstosuitambientlightconditions.
1 FromthePICTUREmenu,presssorrto
selectAuto Brightness Sensor.
2PressvorwtoselectOnorOff.
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
TheMTS Automodeautomaticallyrecognize
stereo/bilingualprogrammesdependingonthe
broadcastsignal.
1 PressMENU,andthenpressvorwto
displaytheSOUNDmenu.
2 PresssorrtoselectMTS,andthenpress
vorwtoselectAutoorMono.
Mono mode
Ifyouexperiencenoiseorpoorreceptionofany
stereo/bilingualprogramme,settheMTSmode
toMono.
Noisewillbereducedandreceptionmay
improve.
Note:
Ifyouexperiencenoisewithaparticular
programmeonwhosechannelreceptionis
usuallygood,trysettingMTSmodetoAuto,
thenswitchg to e Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
YoucanhearonlyDual 1orDual 2sound
selected,wheneverbilingualprogrammesare
received.
1 PressMENU,andthenpressvorwto
displaytheSOUNDmenu.
2 PresssorrtoselectDual,andthenpress
vorwtoselectDual 1orDual 2.
Notes:
• WhentheMTSsettingisinMono mode, the
Dual menu is not selectable.
• TheDual menu setting status remains even if
theTVisturnedoff.
2 PresssorrtoselectAuto NR,andthen
pressvorwtoselectOnorOff.
Off mode :
MPEG NRmenuandDNRmenuareavailable.
•MPEG NRmode:Low,Middle,HighorOff
•DNR(DigitalNoiseReduction)mode:Low,
Middle,HighorOff
Note:
DNRfunctionisavailablefor480iand576i
signals.
Adjusting the Colour Management
Youcanadjustthepicturecolourqualityby
selectingfrom6basecolouradjustments:Red,
Green,Blue,Yellow,MagentaorCyan.
1 FromthePICTUREmenu,presssorrto
select3D Colour Management.
2 Pressvorw,thenpressvorwtoselect
On.
3 PressQ,thenpresssorrtoselectBase
Colour Adjustment.
4 PressQ,thenpresssorrtoselectan
itemyouwanttoadjust.
Base Colour Adjustment
Hue Saturation Brightness
Red 0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Green
Blue
Yellow
Magenta
Cyan
Reset
5 Pressw,thenpressvorwtoselectHue,
SaturationorBrightness.
6 Presssorrtoadjustthesettingsas
required.
Hue Saturation Brightness
Red 0 0 0
Resetting the Base Colour Adjustment
Theresetfunctionadjuststhebasecolour
adjustmenttothefactorysettings.
1 FromtheBase Colour Adjustmentmenu,
presssorrtoselectReset.
2 PressQ.
Using the Active Backlight Control
Inordertoimprovescreenvisibility,theActive
Backlight Controlsetsthescreenbrightness
automaticallyduringdarkscenes.
Using the TV’s features
Adjusting the sound quality
1 FromtheSOUNDmenu,presssorrto
selectanitemyouwanttoadjust.
2 Pressvorwtoadjustthesettingsas
required.
Selection
v
Pressing
w
Bass weaker stronger
Treble weaker stronger
Balance decreasesthe
rightchannel
decreasesthe
leftchannel
Using the Advanced Sound Settings
Bass Boosthelpstocreaterichbass.
Voice Enhancementhelpstoemphasize
dialogue.Itwillbeeasiertohearvoicesover
otherbackgroundaudio.
1 FromtheSOUNDmenu,presssorrto
selectAdvanced Sound Settings,andthen
pressQ.
2 Presssorrtoselecttheitemyouwantto
adjust.
Advanced Sound Settings
Bass Boost
Voice Enhancement
On
Off
Voice Enhancement : Toturnthevocal
emphasiseffectOn
orOff.
Bass Boost:
Toselectthedesired
bassexpansionlevel
OnorOff.
Using the Stable Sound
TheStable Soundfunctionlimitsthehighest
volumeleveltopreventextremechangesin
volumewhenthesignalsourcechanges(for
example,topreventthesuddenincrease
involumethatoftenhappenswhenaTV
programmeswitchestoacommercial).
1 FromtheSOUNDmenu,presssorrto
selectStable Sound.
2 PressvorwtoselectOnorOff.
Note:
TheStable Soundeffectisactiveonlywhenthe
sound outputs from the speaker.
Selecting the stereo programmes
1 Whenastereoprogrammeisreceived,d
Stereoappears.
10 ABCD Stereo
2 Pressgtoselectthestereo/monaural
mode.dStereoandeMonoappear
cyclicallyonthescreen.
Stereo
Selecting the bilingual programmes
1 Whenabilingualprogrammeisreceived,
jDualappears.
2 Pressgtoselectthesoundtobe
heard.Thesounddiffersaccordingtothe
transmissionsystem:NICAMorGerman
stereo/bilingualbroadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
jDual1
SubIsound
Mainsound
JDual2
SubIIsound
Subsound
e Mono
Mainsound —
Note:
ThesesettingsarenotstoredintheTVmemory.
Selecting the monaural programmes
Ifsounddistortion,interruptionsorsilence
arisesinthelowsoundvolumelevel,settingthe
eMono 2modewillmitigatetheproblem.
1 Whenamonauralprogrammeisreceived,e
Monoappears.
2 Pressgtoselectamonauralmodethat
iseasytohear.eMono 1andeMono 2
appearcyclicallytothescreen.
Note:
Onsomecases,thereceptionofstereo/bilingual
broadcastsmaynotbepossibleafterswitching
on the e Mono 2 mode.
20
Using the TV’s features
Other features settings
Selecting the TIMER menu
TheTimerisespeciallyusefulifyouwanttheTV
toturnitselfonoroffafteraselectedperiodof
time.
1 PressMENU,andthenpressvorwto
displaytheTIMERmenu.
2 Presssorrtoselecttherequiredtimer
mode(Sleep Timer(TurnofftheTV)orOn
Timer).
3 PresstheNumberbuttons(0-9),vorwto
settheOnorOffdelaytime.
Thetimerdisplaywillsetby10minutes,upto
12hoursand50minutes.
4 WhensettingtheOntimer,presssorrto
selecttheOn Timer Positionandenterthe
programpositionnumberyouwanttowatch.
PressEXITtoexitthemenu.SettheStandby
modebypressing ontheremotecontrol.
Note:
TheTVwillautomaticallyturnitselfoffafter
approximately 2 hours if you do not operate the
TVafterturnedonbyontimerfunction.
Using the Auto Format
WhentheTVreceivesatrueHDMIsignalpicture
andtheAuto FormatisOn,itwillautomatically
bedisplayedinHDMIsignalformat,irrespective
oftheTV’sprevioussetting.
1 PressMENU,thenpressvorwtodisplay
theFUNCTIONmenu.
2 PresssorrtoselectAuto Format,then
pressvorwtoselectOnorOff.
Activating Blue Screen
WiththeBlue ScreenfunctionOn,thescreen
willautomaticallyturnblueandthesoundwillbe
muted(exceptforPCinput)whennosignalis
beingreceived.
1 FromtheFUNCTIONmenu,presssorrto
selectBlue Screen.
2 PressvorwtoselectOnorOff.
Note:
InthePCinputmodeorTeletextmode,this
function is not available.
Setting the Automatic Power Down
TheTVwillautomaticallyturnitselfoff(standby)
afterapproximately4hours,ifyoudon’ttouch
thecontrolbuttonsontheremotecontroloron
theTVcontrolpanel.
1 FromtheFUNCTIONmenu,presssorrto
selectAutomatic Power Down.
2 PressvorwtoselectOnorOff.
Panel Lock
Panel LockdisablesthebuttonsontheTV.All
buttonsontheremotecontrolcanstillbeused.
1 FromtheFUNCTIONmenu,presssorrto
selectPanel Lock.
2 PressvorwtoselectOnorOff.
Note:
WhenPanel Lock is On,areminderwillappear
whenthebuttonsontheTVarepressed.
Ifthestandbybuttonispressed,theTVwill
switchoffandcanonlybebroughtoutofstandby
by using the remote control.
Activating the 4:3 Stretch
When4:3 Stretchisactivated,thisfunctionwill
switch4:3formatprogrammesintoafullscreen
picture.
1 FromtheFUNCTIONmenu,presssorrto
select4:3 Stretch.
2 PressvorwtoselectOnorOff.
Note:
In HDMI signal format, this function is available.
Adjusting the brightness of Side Panel
YoucanadjustthebrightnessofSide Panelin
14:9or4:3,etc.mode.
1 FromtheFUNCTIONmenu,presssorrto
selectSide Panel.
2 Pressvorwtoadjustthesettingsas
required.
Teletext
ThisTVhasamulti-pageTeletextmemory,which
takesafewmomentstoloadanditofferstwo
waysofviewingTeletextAutoandListwhich
areexplainedbelow.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Toshiba 24PB1V Owner's manual

Toshiba
Brand
Toshiba
Model
24PB1V
Category
LCD TVs
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents