2. American Standard
  3. 270CB001.021

American Standard 270CB001.021 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 270CB001.021 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K209
© 2013 AS America Inc.
CADET
®
3 ELONGATED TOILET
10" ROUGH-IN
VITREOUS CHINA
7/13
CADET
®
3 ELONGATED TOILET
10" ROUGH-IN
❑ 270CB.001
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•Lowconsumption(6.0Lpf/1.6gpf)toilet
•PowerWash
®
rimscrubsbowlwitheachush
•Includescolormatchbowlcaps
•EverClean
®
surfaceincluded
•3"ushvalve
•2-1/8"trapway
•10"(254mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.6gpf
•5yearwarranty
❑ 3717C.001ElongatedBowl
❑ 4019.001NTank
Nominal Dimensions:
724x439x737mm(28-1/2"x17-1/4"x29")
Fixtureonly,seatandsupplysoldseparately
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5321.110EverClean
®
ElongatedSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
190mm
(7-1/2")
724mm
(28-1/2")
19mm ± 6mm
(3/4" ± 1/4")
64mm
(2-1/2")
470mm
(18-1/2")
439mm
(17-1/4")
737mm
(29")
381mm
(15")
*203mm
(8")
254mm
(10")
356mm
(14")
216mm
(8-1/2")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
356mm
(14")
*152mm
(6")
244mm
(9-5/8")
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
254MM(10")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
/