Rosewill SRM-01 Micro ATX Mini Tower Computer Case User manual

Category
Computer cases
Type
User manual
SRM-01
Product Diagram
Front I/O Diagram
Accessory Kit
Install the Power Supply
Install the Motherboard
Install the Add-in Card
Install an External 5.25” Device
Install a 3.5”/2.5” Drive
Care
Options
Specifications
11
10
9
7
6
5
4
4
12
Open the Unit
Product Diagram
Front I/O Pinout
Panel L
Panel R
Bottom Dust Filter
Front Panel
SRM-01
80 mm Rear Fan
Front I/O Diagram
Accessory Kit
Figure Part’s Name FunctionQty
Screw-B
Screw-C
6
4
8
10
SRM-01
USB 2.0
HD Audio In / out
Reset Button
USB 3.0
Power Button
M/B Standoff
Screw-A
Motherboard
Motherboard
Power Supply
5.25” Device
3.5”/2.5” HDD/SSD
Open the Unit
1-1. Untwist the thumbscrews and slide out panels R and L (Figure 1).
Install the Power Supply
2-1. Secure the power supply unit on the top of the case with Screw-A (Figure 2).
1
2
SRM-01
Install the Motherboard
3b
3a
SRM-01
3-1. Unscrew to release the HDD panel (Figure 3a).
3-2. Line up the standoffs with the screw holes on the motherboard (Figure 3b).
4a
3c
3-3. Screw the motherboard down with Screw-B (Figure 3c).
4. Install the Add-in Card
4-1. Unscrew to release the HDD panel (Figure 4a).
SRM-01
SRM-01
5a
4b
4-2. Install the add-in card and secure with the screws (Figure 4b).
5. Install an External 5.25” Device
5-1. Pull the front panel out and remove it (Figure 5a).
8
SRM-01
5c
5b
5-2. Insert the 5.25” drive and secure with screws (Figure 5b).
5-3. Install the front panel back onto the case (Figure 5c).
6.
9
SRM-01
Install a 3.5” or 2.5” Drive
6b
6a
6-1. Unscrew to release the HDD panel (Figure 6a).
6-2. Secure a 3.5” HDD/2.5” SSD onto the panel and with screws, and then screw the panel back
on (Figure 6b).
10
SRM-01
7. Care
7b
7a
To prevent damage, it is recommended that all panels remain closed and secured.
7-1. Slide the side panels back into place and secure with thumbscrews (Figure 7a)
7-2. Clean the dust filter regularly to ensure adequate airflow and to prevent overheating and
damage (Figure 7b).
11
8. Options
8-1. Additional Fan Install
The SRM-01 has the capacity for additional fans. Please refer to the Specification Table on page 9
for options.
SRM-01
Stryker M
9. Specification Table
Model
Specs
Model Name
Item Number
Type
Color
Case Material
Power Supply Mounted
Motherboard Compatibility
With Side Panel Window
External 5.25" Drive Bays
External 3.5" Drive Bays
Internal 3.5" Drive Bays
Internal 2.5" Drive Bays
Expansion Slots
80/90 mm Fans
120 mm Fans 0
140 mm Fans 1 x Front (optional)
Expansion
Front Ports
Front Ports
Cooling System
Physical Specs
SRM-01
11-147-248
Mini Tower
Black
Steel/Plastic
Top
Micro ATX, Mini ITX
No
1
1
4
2 (0)
0 (2)
1 x USB 3.0
2 x USB 2.0
Audio In/Out
12
Dimensions
Weight
1 x Rear (80 mm) (pre-installed)
6.69” x 13.98” x 13.19” (W x H x D)
5.95 lb.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Rosewill SRM-01 Micro ATX Mini Tower Computer Case User manual

Category
Computer cases
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI