Eagle EA5 Specification

Eagle
Brand
Eagle
Model
EA5
Type
Specification

This manual is also suitable for

The Eagle EA5 is a versatile and powerful tool designed to make your cleaning tasks easier and more efficient. With its advanced features, the EA5 delivers exceptional cleaning performance for a wide range of applications. Here are some key capabilities of your new device:

  • High-Pressure Cleaning: Tackle tough dirt and grime with the EA5's high-pressure water stream, which effectively removes stubborn stains and grease from various surfaces.

  • Adjustable Pressure Control: Customize the water pressure to suit your cleaning needs. Choose from a range of pressure settings to gently clean delicate surfaces or blast away頑固な汚れ頑固汚れ.

The Eagle EA5 is a versatile and powerful tool designed to make your cleaning tasks easier and more efficient. With its advanced features, the EA5 delivers exceptional cleaning performance for a wide range of applications. Here are some key capabilities of your new device:

  • High-Pressure Cleaning: Tackle tough dirt and grime with the EA5's high-pressure water stream, which effectively removes stubborn stains and grease from various surfaces.

  • Adjustable Pressure Control: Customize the water pressure to suit your cleaning needs. Choose from a range of pressure settings to gently clean delicate surfaces or blast away頑固な汚れ頑固汚れ.

ARMOR SEAL
Water Based Urethane Acrylic Concrete Sealer
ARMOR SEAL is a waterborne urethane-modified acrylic clear
concrete sealer formulated to exhibit increased abrasion resistance over
standard acrylic sealers. This acrylic polymer is self cross-linking, providing
excellent resistance to chemicals and hot-tire pickup. This sealer does
not significantly darken the substrate and shows a satin sheen on most
surfaces. Ease of application, low odor, and water cleanup make this an
ideal choice for interior applications. ARMOR SEAL is non-yellowing for
exterior durability.
Semi-Gloss
Water Based
Low Odor
U.V. Resistant
For Indoor or Outdoor Use
www.eaglesealer.com
Made in USA
EAGLE IFP COMPANY
www.eaglesealer.com
ARMOR SEAL
DESCRIPTION
EAGLE ARMOR SEAL is a waterborne urethane-modied acrylic clear sealer formulated to exhibit increased abrasion resistance over standard
acrylic sealers. This acrylic polymer is self-crosslinking, providing excellent resistance to chemicals and hot-re pickup. This sealer does not
signicantly darken the substrate and shows a san sheen on most surfaces. Ease of applicaon, low odor, and water cleanup make this an ideal
choice for interior applicaons.
TOOLS & MATERIALS REQUIRED
EAGLE CLEANER DEGREASER & NEUTRALIZER
EAGLE ETCH & CLEAN
Pump-up sprayer
Medium/short nap roller, lamb’s wool or microber applicator (dependent upon surface)
PREPARATION
Clean dirt, wax, grease, oil and other contaminants from the surface. Be sure to remove any foreign coang unless previous coang is
same or similar water-based sealer. Make sure the surface is clean, dry and sound. Clean oily concrete with EAGLE CLEANER DEGREASER &
NEUTRALIZER. Use a bristle brush for heavily oiled spots. If surface is slick, etch with EAGLE ETCH & CLEAN. Rinse well with EAGLE CLEANER
DEGREASER & NEUTRALIZER and a pressure washer. Allow 24 hours to dry. Concrete must be porous enough to accept water. Dense concrete
surfaces may require mechanical preparaon to accept sealer. Apply only when surface and air temperatures are above 50° F and below 90° F.
Do not apply to excessively hot surfaces as rapid drying may cause bubbles or streaking to form. For pavers, sweep away any loose sand.
APPLICATION
Perform test to ensure compability. Apply at substrate temperatures above 50° F and below 90° F. Apply with sprayer. For exterior concrete,
you may use a medium nap roller. For smooth concrete you may use a lamb’s wool or microber applicator or short nap roller and cross roll.
Thoroughly saturate surface. Apply addional coats as needed for increased gloss. Allow 4 hours for foot trac, 48 hours for auto trac. Do not
apply if rain is imminent.
NET COVERAGE RATE
Two thin coats are recommended.
Smooth Troweled: 300 ² per gallon Textured or Stamped: 200 ² per gallon
Uncured Broom Swept: 200 ² per gallon Exposed Aggregate/Pavers: 100 ² per gallon
CLEANUP
Clean up tools with water.
MAINTENANCE
Clean sealed surface with water only. Reseal surface as needed, but no more oen than every two years to prevent buildup of sealer.
TECHNICAL DATA
VOC: <70g/L
Flash Point: N/A
DISCLAIMER: Since manufacturer has no control over handling, use or storage; no guarantee expressed or implied, is offered. Eagle IFP warrants the product to be free of defects and will replace or refund the purchase price of said products
proven defective. Labor cost and/or other consequential damages are not covered by this warranty. Responsibility for claims of any kind is strictly limited to the purchase price of the product. The suitability of the product for any extended
use shall be solely up to the user.
E-AS-0315-2M
HMIS
Health 1 Flammability 0
Reactivity 0 Protection B
  • Page 1 1
  • Page 2 2

Eagle EA5 Specification

Eagle
Brand
Eagle
Model
EA5
Type
Specification
This manual is also suitable for

The Eagle EA5 is a versatile and powerful tool designed to make your cleaning tasks easier and more efficient. With its advanced features, the EA5 delivers exceptional cleaning performance for a wide range of applications. Here are some key capabilities of your new device:

  • High-Pressure Cleaning: Tackle tough dirt and grime with the EA5's high-pressure water stream, which effectively removes stubborn stains and grease from various surfaces.

  • Adjustable Pressure Control: Customize the water pressure to suit your cleaning needs. Choose from a range of pressure settings to gently clean delicate surfaces or blast away頑固な汚れ頑固汚れ.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents