MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
Mini Hi-Fi
Component System
© 2007 Sony Corporation
MHC-GT55
MHC-GT44
MHC-GT22
3-098-275-14 (1)
Operating Instructions
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
2
GB
WARNING
To reduce the risk of re or
electric shock, do not expose
this apparatus to rain or
moisture.
To prevent re, do not cover the
ventilation of the apparatus with news
papers, table-cloths, curtains, etc.
And don’t place lighted candles on the
apparatus.
To prevent re or shock hazard, do not
place objects lled with liquids, such as
vases, on the apparatus.
Install this system so that the power cord
can be unplugged from the wall socket
immediately in the event of trouble.
Do not install the appliance in a
conned space, such as a bookcase or
built-in cabinet.
is appliance is classied as a CLASS 1
LASER product. is marking is located
on the rear exterior.
Don’t throw away the
battery with general
house waste, dispose of
it correctly as chemical
waste.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not
be playable by this product.
e recorded music is limited to private
use only. Use of the music beyond
this limit requires permission of the
copyright holders.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MICROVAULT is a trademark of Sony
Corporation.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
3
GB
Table of Contents
Guide to parts and controls .............4
Getting Started
Hooking up the system
securely .................................................... 9
Setting the clock ................................12
Basic Operations
Playing a CD/MP3 disc .....................13
Listening to the radio .......................15
Recording from a disc onto an USB
device .....................................................16
Listening to music of an USB
device .....................................................19
Playing a tape ......................................21
Using optional audio
components .........................................22
Adjusting the sound .........................23
Changing the display .......................23
Other Operations
Creating your own program
(Program Play) .....................................25
Presetting radio stations .................26
Recording onto a tape
(CD Synchro recording/Manual
recording/Sound Mixing) ................27
Creating your own sound
eect ......................................................29
Enjoying karaoke ................................30
Using the Timers .................................31
Others
Troubleshooting .................................33
Messages ...............................................38
Precautions ...........................................39
Specications ......................................41
Playable/Recordable USB
devices ...................................................43
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
4
GB
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
MHC-GT55
MHC-GT44/GT22
* MHC-GT44 only
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
5
GB
Guide to parts and controls
Remote
/ (on/standby) (page 10, 12,
18, 20, 32, 37)
Press to turn on the system.
Unit: STANDBY indicator (page
23, 33)
Lights up when the system is o.
Remote sensor (page 33)
DISPLAY (page 12, 23, 33)
Press to change the information on the
display.
Unit: ILLUMINATION (page 23)
Press to change the illumination pattern
around MASTER VOLUME
.
CD (page 10, 13, 25, 28, 37)
Press to select the CD function.
TUNER/BAND (page 15)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
Unit: TAPE A/B (page 21)
Press to select the TAPE function. Press
to select TAPE A or TAPE B.
Unit: AUDIO (page 22)
Press to select the AUDIO function.
USB (page 18, 19, 25)
Press to select the USB function.
Remote: FUNCTION
Press to select the function.
(MHC-GT55/GT44 only)
SUBWOOFER (page 23)
Press to turn on and o the subwoofer.
SUBWOOFER indicator (page 23)
Lights up when the subwoofer is on.
Continued
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
6
GB
PUSH (page 21)
Press to insert or eject a tape.
ERASE (page 18)
Press to erase MP3 les and folders
from the connected optional USB device
(Digital music player or USB storage
media).
Unit: PRESET EQ (page 29),
GROOVE (page 23, 29, 37),
SURROUND (page 23, 29)
Remote: EQ (page 23)
Press to select the sound eect.
PLAY MODE/TUNING MODE
(MHC-GT55 only) (page 14, 15,
17, 20, 28)
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
EQ BAND (MHC-GT44/GT22 only)
(page 29)
Press to select the frequency band.
PHONES jack
Connect the headphones.
AUDIO INPUT L/R jacks (page 22)
Connect to an audio component
(Portable audio player, etc.).
(USB) port (page 16, 17, 18, 19)
Connect an optional USB device (Digital
music player or USB storage media).
REC/ERASE indicator (page 18,
20)
Lights up when recording to the
connected optional USB device (Digital
music player or USB storage media), or
when erasing MP3 les or folders.
MIC jack (page 30)
Connect an optional microphone.
MIC LEVEL (page 30)
Turn to adjust the microphone volume.
Unit: MASTER VOLUME (page 13,
15, 19, 21, 22)
Turn to adjust the volume.
Remote: VOLUME +/ (page 13,
15, 19, 21, 22, 31)
Press to adjust the volume.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
7
GB
Guide to parts and controls
OPERATION DIAL (page 13, 20,
29)
Turn to select a track, le or folder.
Unit: (play/pause) (page 10,
13, 19, 21, 37)
Remote: (play) (page 13, 19,
21, 26)
(pause) (page 13, 20, 22)
Press to start or pause playback.
(stop) (page 13, 15, 17, 20, 22,
28, 37)
Press to stop playback.
/ (go back/go forward)
(page 13, 18, 20, 25)
Press to select a track or le.
Unit: TUNING +/ (page 15, 37)
Remote: +/ (tuning) (page 15)
Press to tune in the desired station.
+/ (select folder) (page 13,
18, 20, 25)
Press to select a folder.
/ (rewind/fast forward)
(page 13, 20, 22)
Press to nd a point in a track or le.
Continued
CD-USB SYNC/REC1 (page 17)
Press to record from a disc onto the
connected optional USB device (Digital
music player or USB storage media).
CD-TAPE SYNC (page 28)
TAPE REC PAUSE/START (page 28)
Press to record onto a tape.
OPEN/CLOSE (page 13)
Press to insert and eject a disc.
Unit: DISC 1 3 (page 13, 14)
Press to select a disc. Press to switch to
the CD function from other function.
Unit: DISC SKIP/EX-CHANGE
(page 13, 14, 28)
Press to select a disc. Press to exchange a
disc while playing.
Remote: DISC SKIP (page 13, 25,
28)
Press to select a disc.
RETURN (page 13, 20)
Press to return to the parent folder.
Press to exit search mode.
ENTER (page 12, 13, 17, 18, 20, 25,
26, 28, 31)
Press to enter the settings.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
8
GB
(MHC-GT55 only)
ENTER (page 12, 13, 17, 18, 20,
28)
Press to enter the settings.
+/ (equalizer level) (page 29)
Press to adjust the equalizer level.
(MHC-GT55 only)
BASS (page 29)
Press to select low frequency. e
indicator lights up when the button is
pressed.
VOCAL (page 29)
Press to select mid frequency. e
indicator lights up when the button is
pressed.
GUITAR (page 29)
Press to select high frequency. e
indicator lights up when the button is
pressed.
FOCUS (page 29)
Press to emphasize equalizer level of the
selected band.
CLOCK/TIMER SELECT (page 32)
CLOCK/TIMER SET (page 12, 31)
Press to set the clock and the timers.
REPEAT/FM MODE (page 13, 15,
20)
Press to listen to a disc, an USB device, a
single track or le repeatedly.
Press to select the FM reception mode
(monaural or stereo).
Battery compartment lid (page
11)
CLEAR (page 26)
Press to delete a pre-programmed track
or le.
TUNER MEMORY (page 26)
Press to preset the radio station.
PLAY MODE/TUNING MODE
(page 14, 15, 17, 20, 25, 27, 28)
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
SLEEP (page 31)
Press to set the Sleep Timer.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
9
GB
Getting Started
Getting Started
Hooking up the system securely
AM loop antenna
FM lead antenna (Extend it horizontally.)
Brown side for other regions
White side for North American model
Red (Solid/)
Black (Striped/)
D-LIGHT SYNC controller cord (not supplied)
or
Subwoofer
Front speaker (right)
Front speaker (left)
Wall socket
Continued
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
10
GB
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antennas.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Subwoofer (MHC-GT55/GT44 only)
Insert only the stripped portion of the
cords into the SUB WOOFER OUT jacks.
Speakers
Insert only the stripped portion of the
cords into the SPEAKER jacks.
D-LIGHT SYNC OUT jack (Except for
Oceanian model)
Use the D-LIGHT SYNC controller to
connect to this jack. You need to connect
the D-LIGHT SYNC controller to the
lighting device* (not supplied). e
lighting device will react according to
control signals transmitted by the D-
LIGHT SYNC controller upon receiving
music source from the system. For details
on the use of D-LIGHT SYNC controller
and lighting device, refer to the respective
operating instructions supplied with the
respective device.
* Refer to the D-LIGHT SYNC controller
operating instruction for the recommended
lighting device.
Note
e lighting eect may be dierent depending
on the connected lighting device or the type of
music being played back.
Power
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
e demonstration appears in the display.
If the plug does not t the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
Remove all discs to protect the CD
mechanism.
2
Press CD
to select the CD
function.
3
Hold down
on the unit,
and press /
on the unit until
“STANDBY” appears.
4
After “LOCK” appears, unplug the
power cord.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
11
GB
Getting Started
Speaker pads
Attach the supplied speaker pads to
the bottom of the front speakers and
subwoofer to prevent slipping.
Front speakers:
4 pads for each speaker
Subwoofer:
4 pads (MHC-GT55/GT44 only)
To use the remote
Slide and remove the battery
compartment lid
, and insert the two
supplied R6 (size AA) batteries, side
rst, matching the polarities shown
below.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix dierent types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Batteries installed devices shall not be
exposed to excessive heat such as sunshine,
re or the like.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
12
GB
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /
to turn on the
system.
2
Press CLOCK/TIMER SET
.
If the current mode appears on
the display, press /
repeatedly to select “CLOCK SET”
and then press ENTER
.
3
Press /
repeatedly
to set the hour, and then press
ENTER
.
4
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is o
Press DISPLAY
repeatedly until the
clock is displayed. e clock is displayed
for about 8 seconds.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
13
GB
Basic Operations
Basic Operations
Playing a CD/MP3 disc
1
Select the CD function.
Press CD
.
2
Place a disc.
Press OPEN/CLOSE
on the
unit, and place a disc with the label
side up on the disc tray.
To insert additional discs, press DISC
SKIP
to rotate the disc tray.
To close the disc tray, press OPEN/
CLOSE
on the unit again.
Do not force the disc tray closed with
your nger, as this may damage the
unit.
3
Start playback.
Press (or on the unit)
.
4
Adjust the volume.
Press VOLUME +/ (or turn
MASTER VOLUME on the unit)
.
Other operations
To Press
Pause playback (or on the
unit)
. To resume
play, press the button
again.
Stop playback
.
Select a folder
on an MP3
disc
+/
.
Select a track
or le
/
.
Find a point in
a track or le
Hold down /
during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
Select a disc DISC SKIP (or DISC 1
3 on the unit)
in
stop mode.
Select a folder
and le on an
MP3 disc while
viewing the
folder and le
names on the
display*
Turn OPERATION
DIAL
on the unit
to select the desired
folder, then press
ENTER
.
Turn OPERATION
DIAL
on the unit to
select the desired le,
then press ENTER
.
To return to the
previous operation,
press RETURN
on
the unit.
Continued
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
14
GB
To Press
Switch to CD
function from
other function
DISC 1 3
on the
unit (Automatic Source
Selection).
Exchange other
discs while
playing
EX-CHANGE
on
the unit.
* When using a CD-DA disc, you can use the
same operation to select a track.
To change the play mode
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ALL DISCS” for all discs or
“1 DISC” for a disc or “ *” for all MP3
les in the folder on the disc), shue
play (“ALL DISCS SHUF” or “1 DISC
SHUF” or “ SHUF*”), or program
play (“PGM”).
* When playing a CD-DA disc, (SHUF)
Play performs the same operation as 1 DISC
(SHUF) Play.
Notes on Repeat Play
All tracks or les on a disc are played
repeatedly up to ve times.
You cannot select “REP” and “ALL DISCS
SHUF” at the same time.
“REP1” indicates that a single track or le is
repeated until you stop it.
Notes on playing MP3 discs
Do not save other types of les or
unnecessary folders on a disc that has MP3
les.
Folders that have no MP3 les are skipped.
MP3 les are played back in the order that
they are recorded onto the disc.
e system can only play MP3 les that have
a le extension of “.MP3”.
If there are les on the disc that have the
“.MP3” le extension, but that are not MP3
les, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 150 (including the root folder).
MP3 les is 255.
MP3 les and folders that can be
contained on a single disc is 300.
folder levels (the tree structure of les)
is 8.
Compatibility with all MP3 encoding/writing
soware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and playback continues until
another session is encountered.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
15
GB
Basic Operations
Listening to the radio
1
Select “FM” or “AM.”
Press TUNER/BAND
repeatedly.
2
Select the tuning mode.
Press TUNING MODE
repeatedly
until “AUTO” appears.
3
Tune in the desired station.
Press +/ (or TUNING +/
on the unit)
. Scanning stops
automatically when a station is
tuned in, and then “TUNED” and
“STEREO” (for stereo programs only)
appear.
4
Adjust the volume.
Press VOLUME +/ (or turn
MASTER VOLUME on the unit)
.
To stop automatic scanning
Press
.
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNING +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn o stereo
reception.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
16
GB
Recording from a disc
onto an USB device
You can connect an optional USB device
(Digital music player or USB storage
media) to the (USB) port
on the
unit and record music from a disc to the
USB device.
You can record from a CD-DA disc or
MP3 disc only.
e audio format of les recorded by this
system is MP3.
e approximate size of the recording is
about 1 MB per minute of recording time
from a CD. e size may be larger when
recording from an MP3 disc.
See “Playable/Recordable USB devices”
(page 43) for a list of USB devices that
can be connected to this system.
Synchro Recording
You can easily record an entire disc onto
an USB device.
1
Connect a recordable USB
device to the (USB) port
as shown below.
USB device (Digital music
player or USB storage
media)
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
2
Select the CD function, then
load the disc you want to
record.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
17
GB
Basic Operations
3
Press PLAY MODE
repeatedly
to select the play mode when
the CD player is stopped.
e play mode automatically changes
to normal play mode, if you start
recording in shue play mode, repeat
play mode or in program play mode
(when no tracks or MP3 les are
programmed).
For details about the play mode, see
“To change the play mode” (page 14).
4
Press CD-USB SYNC/REC1
on
the unit.
“REC” ashes, and the display
cycles through “CD-USB SYNC,”
“xxxxxxFREE” (remaining space on
the USB device) and “PUSH ENTER.”
e USB device stands by for
recording and the CD player pauses
for play.
5
Press ENTER
.
Recording starts. When the recording
is completed, the CD player and the
USB device stop automatically.
Recording a single track or MP3
le during playback (REC1)
You can easily record the track or MP3
le that is currently being played back
onto an USB device.
1
Connect a recordable USB
device to the (USB) port
.
2
Select the CD function, then
load the disc you want to
record.
3
Select the track or MP3 le you
want to record, then start play.
4
Press CD-USB SYNC/REC1
on
the unit while the selected track
or MP3 le is being played back.
“REC” ashes, and the display
cycles through “CD-USB REC1,”
“xxxxxxFREE” (remaining space on
the USB device) and “PUSH ENTER.”
e USB device stands by for
recording and the CD player pauses
for play.
5
Press ENTER
.
Recording starts. When the recording
is completed, the CD player continues
to play.
To stop recording
Press
.
Continued
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
18
GB
To remove the USB device
1
Check that the REC/ERASE indicator
on the unit is o.
2
Press /
to turn o the system.
3
Remove the USB device.
To erase MP3 les or folders from the
USB device
You can erase MP3 les or folders from
the USB device.
1
Connect a recordable USB device to
the (USB) port
.
2
Select the USB function.
Press USB
.
3
Press /
or +/
repeatedly to select the MP3 le or
folder you want to erase.
4
Press ERASE
on the unit.
“TRACK ERASE” or “FOLDER
ERASE,” and “PUSH ENTER” appear
alternately in the display.
To cancel the erase operation, press
.
5
Press ENTER
.
e selected MP3 le or folder is
erased.
Folder and le generation rules
When rst recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and les are
generated within this “MUSIC” folder
as follows according to the recording
method.
Synchro Recording
1)
Recording
source
Folder name File name
MP3 Same as the recording source
2)
CD-DA “FLDR001”
3)
“TRACK001”
4)
REC1 recording
Recording
source
Folder name File name
MP3
“REC1”
5)
Same as the
recording
source
2)
CD-DA “TRACK001”
4)
1)
In Program Play mode, the folder name is
“FLDRxxx,” and the le name depends on the
recording source (CD-DA disc or MP3 disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereaer.
4)
File numbers are assigned serially thereaer.
5)
A new le is recorded in the “REC1” folder
each time REC1 recording is performed.
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
19
GB
Basic Operations
Notes
Do not connect the system and the USB
device through an USB hub.
When recording from a CD, the tracks
are recorded as 128 kbps MP3 les. When
recording from an MP3 disc, MP3 les
are recorded with the same bit rate as the
original MP3 les.
While recording from an MP3 disc, no sound
is output and “HIGH SPEED” appears.
CD text information is not recorded in the
created MP3 les.
If you cancel the recording partway, an
MP3 le is created up to the point when the
recording was stopped.
Recording stops automatically if:
the USB device runs out of space during
recording.
the number of MP3 les on the USB
device reaches the limit for the number
that the system can recognize.
Up to 999 MP3 les or 997 folders can be
contained on a single USB device.
e maximum number of MP3 les and
folders may vary depending on the MP3 le
and folder structure.
You cannot erase MP3 les and folders in
shue play mode or program play mode.
If the folder to be erased contains non-MP3
format les or sub folders, these are not
erased.
If a folder or le that you are trying to record
already exists on the USB device with the
same name, a sequential number is added
aer the name without overwriting the
original folder or le.
When recording aer the erase operation has
been performed, the new folders and les are
registered to the erased locations, so les may
not be played back in the recorded order.
e Program Play setting is erased when the
erase operation is performed.
Listening to music of
an USB device
You can listen to music stored in the USB
device.
e audio format that can be played back
by this system is MP3* only.
See “Playable/Recordable USB devices”
(page 43) for a list of USB devices that
can be connected to this system.
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
1
Select the USB function.
Press USB
.
2
Connect an optional USB device
to the (USB) port
on the
unit.
When the USB device is connected,
the display changes as follows:
“READING” “STORAGE
DRIVE*”
* When connecting USB storage media,
the volume label is displayed next if
recorded.
Note
It may take about 10 seconds before
“READING” appears depending on the
type of USB device connected.
3
Start playback.
Press (or on the unit)
.
4
Adjust the volume.
Press VOLUME +/ (or turn
MASTER VOLUME on the unit)
.
Continued
MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
20
GB
To remove the USB device
1
Press
to stop playback.
2
Check that the REC/ERASE indicator
on the unit is o.
3
Press /
to turn o the system.
4
Remove the USB device.
Other operations
To Press
Pause playback (or on the
unit)
. To resume
play, press the button
again.
Stop playback
. To cancel
resume play, press
the button twice and
check that “RESUME”
disappears from the
display.
Select a folder
+/
.
Select a le /
.
Select a folder
and le on an
USB device
while viewing
the folder and
le names on
the display
Turn OPERATION
DIAL
on the unit
to select the desired
folder, then press
ENTER
.
Turn OPERATION
DIAL
on the unit to
select the desired le,
then press ENTER
.
To return to the
previous operation,
press RETURN
on
the unit.
To Press
Find a point in
a le
Hold down /
during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
To change the play mode
Press PLAY MODE
repeatedly while
the USB device is stopped. You can
select normal play (“ ” for all les in
the folder on the digital music player),
shue play (“SHUF” or “ SHUF”), or
program play (“PGM”).
Notes on the USB device
You cannot change the play mode during
playback.
Some time may be needed to start playback
when:
the folder structure is complex.
the memory capacity is excessive.
When the USB device is inserted, the system
reads all the les on the USB device. If there
are many folders or les on the USB device,
it may take a long time to nish reading the
USB device.
Do not connect the system and the USB
device through an USB hub.
With some connected USB devices, aer an
operation is performed, there may be a delay
before it is performed by this system.
If the system is turned o during Resume
Play mode, when the system is turned on
again playback starts from the beginning of
the MP3 le that was in Resume Play mode.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
Sony MHC-GT22 Operating instructions
- Category
- Cassette players
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sony CMT-EH15 Operating instructions
-
Sony Home Theatre and Hi-Fi CMT-EH25 User manual
-
-
Sony MHC-EC77 User manual
-
Sony MHC-EC68USB Owner's manual
-
Sony MHC-EC50DC Operating instructions
-
Sony CMT-FX200 Owner's manual
-
-
Sony MHC-V11 User manual
-
Other documents
-
Hyundai H-MS2302 User manual
-
TEAC CD-X9 User manual
-
Hamilton CD 563 Owner's manual
-
Supersonic SC-803SILVER Datasheet
-
Panasonic SC-AKX10 Datasheet
-
Akura ANLGT2-X User manual
-
Aiwa DBX-DS55/DS50 Operating Instructions Manual
-
Pioneer DRM-6324X User manual
-
Philips AZ1836/98 User manual
-