V-TOUCH
Quickstart Guide
Charging Your V-touch
There are two ways to charge your player,
either by connecting to a PC or to a USB
Wall Charger using the provided USB
Cable. Charging through a USB Wall
Charger is the quicker method. While the
player is connected to your PC, it will
continue to charge even while downloading
files.
Turning ON/OFF Your V-touch
The ON/OFF switch is located at the top of
the player. To turn on the unit, hold the
ON/OFF switch to the right for 3-5
seconds. Once the player has finished
loading, you will be brought to the main
menu. To turn off the unit, hold the
ON/OFF switch to the right for 3-5
seconds. Moving the switch to the left will
lock the player, preventing accidental press
of buttons/functions.
Connecting To Computer
NOTE: Our media players, including the
V-Touch, are not compatible with any
software on the market for synching media
players with user’s media libraries. Once
you connect the V-Touch to your computer
it should prompt you that the removable
storage device has been connected. If it
prompts for a driver, allow it to search
automatically it should find the correct
driver. After the V-Touch installs and the
computer detects it, there will be two
2.8" wide touch screen, 320X240
dot matrix full color high speed TFT
screen
Support MP3, WMA, RA, WAV
music formats
Support for AVI, MP4, 3GP video
formats
Support for JPEG, BMP, GIF picture
formats
Built‐in 2MP Camera for Still,
Video, and webcam.
FM Radio
Voice Recorder
E‐Book Reader
MiniSD Card Slot
•
•
•
•
•
•
•
•
•
BASIC FEATURES:
drives that show up, one being the players
internal memory, the other the memory
card slot (NOTE: Will show as empty if
there is no memory card inserted into the
V-Touch). There will be labeled folders in the
correct drive.
They will correspond with the files you may
upload to them.
Music
NOTE: Audio File Formats Supported:
MP3, WMA
1. Plug your V-Touch to your computer via
the provided USB cable.
2. Move the mouse cursor to the start
button.
3. Click on My Computer
4. Click on My Computer and double-
click the removable disk icon.
5. To add music, Double-click the Audio
folder
6. Copy and Paste your music files into this
Audio folder (do not separate into
subfolders)
Creating Favorites Or A Playlist
First, create a "My Favorites" playlist,
enter “My Favorites” from the MUSIC
menu, then select "Create New Favorite",
this should take a few seconds and will
create an empty playlist for the songs to
enter, once this has been created,
go to MUSIC and add the songs to
your playlist by highlighting the song
you wish to add and tapping the menu icon
in the top right for each song you wish to
add to a “My Favorites” list. If you have
more than one "My Favorites" list, select
the one you wish to add the song to.
Adjust Volume
1. While your music is playing
2. Press the speaker icon that is near the
lower right hand side (When you tap this
icon, volume control will activate turning
the "blue" tracking bar "orange")
3. Then press <</>> or the -/+ to adjust
volume to your desire.
Videos
NOTE: Any videos used without converting
with supplied converter must be less than
or equal to the following specs:
320x240Resolution, AVI File with 25fps
To add videos:
Use directions 1-4 from MUSIC to begin
then double-click the Video folder from the
main directory. Here you can copy and
paste AVI files, as well as removing videos
you do not wish to keep on your player.
Video Conversion Software
Can be found in the MP4Tools folder, which
is located in the same directory as the
Audio, Video, Pictures folders. If not, you
may download a copy at
http://www.visual-land.com/
downloads/MP4Tools.zip
(can be found on the V-Touch page under
the support tab)
1. Run the installation for the MP4 Tool on
the included application CD.
2. To begin, choose the video you wish to
convert by selecting the File menu, then
Open Source.
3. Find the file that you wish to convert.
Once it is opened go to the File menu again
to select the location where you wish to
save the file and what you want to name it.
4. If you do not do so it will automatically
save the file in the same location and the
same name will be used.
5. Before converting you may also adjust
different settings, such as video resolution,
volume adjustment, the frames per
second, and other advanced features, you
may also at any time select default to bring
back the original settings if you have
changed something and did not like the
results.
6. Once you have the settings to your
preference, you may now use the Convert
button, which may take a few to several
minutes, depending on the
file size of the original.
Pictures
To add images, Double-click the Image
folder. Here you can copy & paste pictures.
GIF, JPEG, and BMP.
Radio
To change between stations, move left and
right, either using the + or - buttons to
change stations or tapping right or left on
the screen.
To change radio frequencies:
Tap the Icon on the top right corner for
options, select Area Select, and choose the
appropriate area.
To save stations:
1. Once on the desired station you wish to
save
2. Tap the options icon
3. Select save Station Info
4. To move between saved stations use the
M button to move to next saved station.
Calibrate
Calibrate, only if the icons are not
responding to tapping with the stylus pen
or with your fingers. Please follow these
instructions. (NOTE: if the screen is not
responding to touch use the + and –
buttons to highlight the Calibrate feature
then the M button to select it.)
1. With the stylus gently tap the center of
the “+” as it appears.
2. A success will show up once this has
been completed successfully. If not
successful please make sure you are only
tapping the center of the “+” sign.
Camera
NOTE: The camera function does not have
a built in light, the lower the natural light in
the room the darker the image will seem.
To take a picture from Camera you will
press the M button at the bottom of the
player. The pictures will be automatically
saved. In the Camera feature, there is an
icon that for options, the same style as in
Music and Video, tap this to enter the
settings and features menu.
Troubleshooting
Player cannot power on:
Check if the battery power is out. If it is,
connect the player via USB or wall charger,
then try to power on.
No sound in earphones:
Check if the volume has been set to O.
Check if the earphones are fully plugged in.
Loud Noise:
Check whether the earphone plug is clean,
dirt can cause noise. Check whether the
music file is damaged. Try playing another
music file to determine if that is the
problem. If the file has been damaged, it
can cause serious noise.
FM reception is poor:
Try to adjust the direction and location of
player, try stretching the headphone cable.
Check whether there are electronic
devices near that's jamming the signal.
Touch isn’t responding:
Check whether the HOLD lock is on. If not
follow the instructions to Calibrate the
player.
For further details on how to use your
player, consult the full PDF manual located
inside the player or download it from our
website: http://www.visual-land.com
If you have a problem with your player
please visit our website and view our
support pages.
Copyright © 2011 Visual Land Inc.
/
