1
Unpack printer
Notes:
• Place the printer near the computer
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
• Do not attach the USB cable until
prompted to do so.
• The packaged printhead is shipped
inside the printer.
• Contents may vary by model and
region.
2
Remove tape and packing material from all areas of the
printer
Lexmark S400 Series Installation
3
Raise paper support
4
Raise printer control panel
Lexmark S400 Series Installation
5
Open printer and remove packaged printhead from
printer
6
If necessary, insert correct (1) language overlay and install
(2) protective cover
Lexmark S400 Series Installation
7
Lock the protective cover in place
8
Close printer
Lexmark S400 Series Installation
9
Use lever to extend paper guides
10
Load paper
Note: Use the lever to adjust the paper
guides.
Lexmark S400 Series Installation
11
Extend paper exit tray
12
Connect power cord only
Note: DO NOT attach the USB cable yet.
CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting
power or making any cabling connections.
13
Make sure printer is on
Lexmark S400 Series Installation
14
Set language
1 Using the printer control panel, press
or until the language you want
appears on the display.
2 Press OK to save.
15
Set country/region
1 Using the printer control panel, press
or until the country or region you
want is highlighted on the display.
2 Press OK to save.
16
Set up fax
1 Using the printer control panel, press
or until Yes appears on the
display.
2 Press OK.
Lexmark S400 Series Installation
17
Set date and time
1 Using the keypad on the printer
control panel, set the date. Press
or to scroll between the month, day,
and year. Date format varies
depending on selected country or
region.
2 Press OK.
3 Using the keypad on the printer
control panel, set the time. Press
or to scroll between the hours,
minutes, and time format. Press or
to choose a time format.
4 Press OK to save.
18
Enter fax number and fax name for your printer
1 Using the keypad on the printer
control panel, enter your fax number.
2 Press OK to save.
3 Using the keypad on the printer
control panel, enter the fax name for
your printer.
4 Press OK to save.
19
Open printer and remove any tape from latch
Note: The carriage moves to the
printhead installation position as shown.
Lexmark S400 Series Installation
20
Squeeze and lift latch
21
Remove printhead from the disposable container
22
Insert printhead and close latch until it clicks
Lexmark S400 Series Installation
23
Close printer
24
Open printer
Note: The printhead moves to the
cartridge installation position as shown.
Lexmark S400 Series Installation
25
First, insert each color ink cartridge. Then, use two hands
to install black cartridge.
26
Close printer
Lexmark S400 Series Installation
27
Press OK to print alignment page
Notes:
• Do not remove the page until
printing stops. The alignment page
may take a while to print and will
move in and out during the process.
• Streaks on the alignment page are
normal and not an indication of a
problem.
• The alignment page that prints may
differ from the one shown.
• Recycle the alignment page.
Lexmark S400 Series Installation
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lexmark Interpret S405 User manual
-
-
-
Lexmark 20e User manual
-
-
Lexmark Impact S308 User guide
-
Lexmark Prospect Pro205 User manual
-
-
-
Lexmark S410 series User manual