Pyronix BREAKGLASS 2000 Quick start guide

Brand: Pyronix

Model: BREAKGLASS 2000

Type: Quick start guide

BREAKGLASS

2000/BG16DF

TESTER

GENERAL DESCRIPTION

This unique tester has been designed

specifically for testing the BreakGlass

detector.

By simulating the sound of breaking

glass the Breakglass Tester offers

a way of correcting the sensitivity

of the Breakglass detector ensuring

good detection and performance

at all times.

RINS 301-4

This product is approved for use in the

Residential, Commercial and Light Industrial Environment.

OPERATIONAL SWITCHES

OFF - Tester switched off.

NORMAL - Press the trigger when in normal mode to

Generate a loud breaking glass sound.

FLEX - In Flex mode, pressing the trigger arms the unit.

To create a flex condition thump the protected

glass in a controlled manner.

This will cause the Breakglass Tester to

generate a breaking glass sound.

TRIGGER - Creates glass break sound.

TEST PROCEDURE

Step 1 - Take the cover off the detector and place in test mode.

Step 2 - Set sensitivity to minimum.

Step 3 - Place the tester next to the window, which is to be protected.

Step 4 - Switch the tester into flex mode.

Step 5 - Arm the tester by pressing the trigger button.

Step 6 - Thump the glass lightly to simulate object hitting the window.

Step 7 - When the Tester simulates breaking glass check all the LED

indicators on the Breakglass detector.

The indicators will illuminate in the following order indicating

a good activation. (Green, Orange and Red)

Step 8 - Adjust the sensitivity as required to gain the best LED indication.

(After sensitivity adjustment re-test)

Step 9 - Replace cover on detector.

Step 10 -Note See Breakglass instructions for further

information on detector.

LOUD NOISE

SAFETY

The Breakglass tester produces loud sounds, always direct the tester away from the ear

when in use.

SPECIFICATIONS

Operating Voltage - 9V Battery

Battery Life - 2000+ Operations

Simulated Glass - Plate glass

Operating Temperature -10 C to 40 C

Storage Temperature -20 C to 60 C

STEP 1

Sensitivity adjustment

Min

Max

STEP 2

STEP 7

GREEN = Flex activation.

ORANGE = Shatter activation.

RED = Alarm Activation

LED Indicators

BREAKGLASS

2000

Tester

TRIGGER

FLEX

NORMAL

OFF

LOUD NOISE

TRIGGER

FLEX

NORMAL

OFF

100mm

190mm

35 mm

WARRANTY

This product is sold subject to our standard warranty

conditions and is warranted against defects in workmanship for

a period of 2 years. In the interest of continuing improvement

of quality, customer care and design Pyronix LTD reserve

the right to amend specifications without giving

prior notice.

Pyronix Limited

Pyronix House

Braithwell Way

Hellaby, Rotherham

S66 8QY, ENGLAND

Tel: 0845 6434 999

or +44(0)1709 535225

Hours: Monday to Friday, 8:00am - 6:30pm

email: customer.[email protected]

website: www.pyronix.com

Pyronix BREAKGLASS 2000 Quick start guide

Pyronix BREAKGLASS 2000 Quick start guide

Pyronix BREAKGLASS 2000 Quick start guide

Related papers

Other documents