Hagerco 9634CS - 1-3/4" Pocket Door Adapter Kit Installation guide

9634CS 1-3/4" Adapter

Installation Instructions

I-SD00403

Rev -, Rev Date: 11/04/20

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

Page 1 of 1

Contents:

Qty:

1. Wider Floor Plates

2. Shim

The 1-3/4" Adapter gives additional clearance for 1-3/4” thick doors.

1 Replace Floor Plates

Figure 1

2 Apply Spacers

Figure 2

• Discard the standard floor plates that came with the pocket

door kit

• Replace it with the wider floor plates included in this kit

• Peel the paper off the 1/8” shim

• Stick it to the top of each split jamb covering the slots

• Follow the rest of the installation instructions included with

the pocket door kit