Greenlee 40790 Chain Brake Shroud User manual

40790 Chain Brake Shroud
Greenlee
Brand
Greenlee
Model
40790 Chain Brake Shroud
Category
Car kits
Type
User manual
SERVICE BULLETIN
52057245 REV1 © 2019 Greenlee Tools, Inc. 9/19
40790 Chain Brake
Shroud Replacement
for use on HPS513CB
and HCS8160CB Chain Saws
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
40790 Chain Brake Shroud Replacement
Important Safety Information
Read and understand all of the
instructions and safety information
in this bulletin before operating or
servicing this tool. Refer also to the
instruction manuals for your saw.
Failure to observe this warning could
result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from ying
debris or hydraulic oil.
Instructions
1
4
5
3
2
6
1. Loosen bowden pin (2) to release cable (6).
2. Remove shoulder bolt (5) and washers (4).
3. Remove socket head cap screw (3).
4. Slide cable (6) from bowden pin (2) on shroud (1).
5. Repeat steps in reverse order, replacing shroud (1),
shoulder bolt (5), and washers (4) with new congu-
ration (shown below) contained in kit.
1
5
4
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
©2019 Greenlee Tools, Inc. • An ISO 9001 Company
USA Tel: 800-435-0786
Fax: 800-451-2632
Canada Tel: 800-435-0786
Fax: 800-524-2853
International Tel: +1-815-397-7070
Fax: +1-815-397-9247
www.greenlee.com
  • Page 1 1
  • Page 2 2

Greenlee 40790 Chain Brake Shroud User manual

40790 Chain Brake Shroud
Greenlee
Brand
Greenlee
Model
40790 Chain Brake Shroud
Category
Car kits
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers