Randell 2135 Datasheet

Type
Datasheet

Randell 2135 is a single-section roll-in refrigerator designed for efficient and high-performance service. With its top-mounted expansion valve refrigeration system, it offers consistent performance and maximizes usable interior space. The stainless steel front and anodized aluminum liner door are durable and easy to clean. The unit features an automatic defrost system, self-closing cam lift hinges, and a cylinder door lock for added convenience and security. The exterior LED temperature display allows for easy monitoring, and the 8' cord and plug provide ample reach for placement.

Randell 2135 is a single-section roll-in refrigerator designed for efficient and high-performance service. With its top-mounted expansion valve refrigeration system, it offers consistent performance and maximizes usable interior space. The stainless steel front and anodized aluminum liner door are durable and easy to clean. The unit features an automatic defrost system, self-closing cam lift hinges, and a cylinder door lock for added convenience and security. The exterior LED temperature display allows for easy monitoring, and the 8' cord and plug provide ample reach for placement.

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Reach-In Roll-In Single Door Refrigerator model 2135
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal,
inside & out. The top, bottom, & back are galvanized steel. Front
and sides are available in finishes as listed above. Door and louver
are stainless steel and are removable without tools. Provided with
stainless steel removable ramp.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F.
standard #7. Solid core stainless steel interior floor is standard.
The interior walls, ceiling and door liner are available in either
stainless steel or anodized aluminum as listed above. Foamed in
place, CFC free urethane insulation. Snap-in A.B.S. breaker strips
allow access to condensate heater wires. Provided with stainless
steel rack guide.
DOORS: Stainless steel front with either anodized aluminum or
stainless steel liner, mounted on (3) heavy duty cam lift hinges
with heavy duty chrome handle, and cylinder door lock.
REFRIGERATION: Top mounted condensing unit and evaporator coil,
expansion valve system with thermostatic control, factory tested
and balanced to maintain 38˚ F. average interior temperature utiliz-
ing CFC free 134a refrigerant. Evaporator coil is coated to resist
corrosion. Unit supplied with master on/off switch and 8' cord and
plug. Access to service points without tools is standard.
Description:
Randell Series 2000 Single Section Roll-Ins are built for years of
efficient, high performance service. The top mounted, expansion
valve refrigeration system offers the highest, most consistent
performance available while maximizing usable interior space.
Standard Features:
• Expansion Valve
• Exterior LED Temperature Display
Top mounted Compressor & Evaporator Coil
• C.F.C. Free R-134a Refrigerant
• Efficient Hot Gas Condensate Evaporator
Automatic Defrost
• 8' Cord & Plug
• Main Power Supply Switch
• Self-Closing, Cam Lift Hinges with 120˚ Open Feature
(Lifetime Warranty)
Triple Hinged Doors
• Cylinder Door Locks
• Solid Core Stainless Steel Interior Bottom
• Polyurethane Insulation
• Snap-In Magnetic Door Gaskets
• Stainless Steel Interior Rack Guide
• Stainless Steel Removable Ramp
• Fully Coved Interior meeting N.S.F. Standard #7
Standard Series Doors/Louver: Stainless steel.
Exterior Sides: Anodized aluminum. Interior: Anodized aluminum
E Series Cabinet interior, exterior sides, fronts,
and doors stainless steel.
Finishes:
Randell Reach-In, Page 21
PP SPEC0039 Rev. C
Revised 08/09
33°F to 40°F 18°F to 22°F33°F to 41°F
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2010 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Model 2135
Model
2135 one section
L
35”
D
34 1/2"
H
84"
Doors
1
HP
1/3
Volt
115/60/1
Amps
8.6
BTU/HR
2300*
Ship Wt.
850
Cu./Ft.
33.8
FOR REMOTE MODEL
Use same specifications as self-contained model except for:
Model No. Rec. H.P. Rec. BTU/Hr. Amp. Ship Wt.
2135R 1/2 2300 5 800
Note: All remote Reach-Income standard on 6" legs in lieu of casters.
NOTE:
Unit designed to accommodate one 66" high x 26" wide x 29" deep rack.
Actual rack clearance dimensions: 66 1/2" high x 26 1/2" wide x 29 1/2" deep.
Actual door opening dimensions: 67 1/2" high x 28 1/2" wide.
HOUSING
EVAPORATOR
CONDENSATE
DRAIN 1/2 "
HOT GAS
OC CONDENSATE
120V/60Hz/1Ph
JUNCTION BOX
COMPRESSOR
9' LONG CORD SET
LEGEND FOR
EH EVAPORATOR
MODEL # 2135
1/3hp
8.6 Amps
2300 BTU/Hr
J
(NEMA 5-15P)
HP
INDUSTRIES COMPANY
HEATED
HP
EH
OC
J
ACTUAL CLEARANCE DIM.
66"H x 26"W x 29"D RACK.
DESIGNED TO ACCOMMODATE
66.5" x 26.5" x 29.5" DEEP
S/S REMOVABLE
TRIPLE HINGED
DOORS
RAMPS
THERMOMETER
35"
84"
34.5"
33"
32.5"
ONE SECTION ROLL-IN REFRIGERATOR
* Based on 90˚ ambient and +20˚ evaporator.
NEMA
5-15P
  • Page 1 1
  • Page 2 2

Randell 2135 Datasheet

Type
Datasheet

Randell 2135 is a single-section roll-in refrigerator designed for efficient and high-performance service. With its top-mounted expansion valve refrigeration system, it offers consistent performance and maximizes usable interior space. The stainless steel front and anodized aluminum liner door are durable and easy to clean. The unit features an automatic defrost system, self-closing cam lift hinges, and a cylinder door lock for added convenience and security. The exterior LED temperature display allows for easy monitoring, and the 8' cord and plug provide ample reach for placement.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI