2268

Randell 2268 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Randell 2268 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Randell 2268?
    What refrigerant does the Randell 2268 use?
    What is the temperature range of the Randell 2268?
    What type of defrost system does the Randell 2268 have?
    What is the interior material of the Randell 2268?
    How many doors does the Randell 2268 have?
    What is the exterior material of the Randell 2268?
    What is the warranty for the Randell 2268?
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Reach-In Roll-In Double Door Freezer model 2268
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal, inside
& out. The top, bottom, & back are galvanized steel. Fronts and
sides are available in finishes as listed above. Doors and louver
are stainless steel and are removable without tools. Provided with
two stainless steel removable ramps.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F.
standard #7. Solid core stainless steel interior floor is standard.
The interior walls, ceiling and door liner are available in either
stainless steel or anodized aluminum as listed above. Foamed in
place, CFC free urethane insulation. Snap-in A.B.S. breaker strips
allow access to condensate heater wires. Provided with stainless
steel rack guide.
DOORS: Stainless steel front with either anodized aluminum or
stainless steel liner, mounted on (3) heavy duty cam lift hinges
with heavy duty chrome handle, and cylinder door lock.
REFRIGERATION: Top mounted condensing unit and evaporator coil,
expansion valve system with pressure control, factory tested and
balanced to maintain (0˚ F. to -5˚ F.) average interior temperature
utilizing CFC free 404a refrigerant. Evaporator coil is coated to
resist corrosion. Unit supplied with master on/off switch and 8'
cord and plug. Access to service points without tools is standard.
Provided with full automatic coil defrost with programmable timer
and safety switches.
Description:
Randell Series 2000 Roll-Ins are built for years of efficient, high
performance service. The top mounted, expansion valve refrig-
eration system offers the highest, most consistent performance
available while maximizing usable interior space.
Standard Features:
• Expansion Valve
• Digital Control
• Exterior LED Temperature Display
Top mounted Compressor & Evaporator Coil
• C.F.C. Free R-404a Refrigerant
• Efficient Hot Gas Condensate Evaporator
• Full Automatic Coil Defrost With Programmable Timer
and Safety Switches
• Cylinder Door Locks
• 8' Cord & Plug
• Main Power Supply Switch
• Self-Closing, Cam Lift Hinges with 120˚ Open Feature
(Lifetime Warranty)
Triple Hinged Doors
• Solid Core Stainless Steel Interior Bottom
• Fully Coved Interior meeting N.S.F. Standard #7
• Stainless Steel Interior Rack Guide
• Polyurethane Insulation
• Condensate Heaters Around All Door Openings
• Stainless Steel Removable Ramps
• Snap-In Magnetic Door Gaskets
Standard Series Doors/Louver: Stainless steel.
Exterior Sides: Anodized aluminum. Interior: Anodized aluminum
E Series Cabinet interior, exterior sides, fronts,
and doors stainless steel.
Finishes:
Randell Reach-In, Page 24
PP SPEC0042 Rev. C
Revised 06/09
0°F to -5°F 60°F to 180°F0°F to -5°F
some models
available
for -10°F
applications,
consult
factory
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2010 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
TWO SECTION ROLL-IN FREEZER
* Based on 90˚ ambient and -10˚ evaporator.
Model
2268 two section
L
68”
D
34 1/2"
H
84"
Doors
2
HP
1
Volt
120/208-230
Amps
9.7
NEMA
14-20P
BTU/HR
5060*
Ship Wt.
1310
Cu./Ft.
70.98
Model 2268
FOR REMOTE MODEL
Use same specifications as self-contained model except for:
Model No. Rec. H.P. Rec. BTU/Hr. Amp. Ship Wt.
2268R CONSULT FACTORY 1260
NOTE:
Unit designed to accommodate one 66" high x 26" wide x 29" deep rack.
Actual rack clearance dimensions: 66 1/2" high x 26 1/2" wide x 29 1/2" deep.
Actual door opening dimensions: 67 1/2" high x 28 1/2" wide.
DT DEFROST TIMER
OC CONDENSATE DRAIN 1/2"
HOT GAS
CONDENSATE
EVAPORATOR
5060 BTU/Hr
LEGEND FOR
MODEL # 2268
1hp COMPRESSOR
R404A REFRIGERANT
9' LONG CORD SET
(NEMA 14-20P)
JUNCTION BOX
120/208-230V/60Hz/1Ph
9.7 Amps
EH EVAPORATOR HOUSING
HP
J
HEATED
INDUSTRIES COMPANY
OC
J
EH
DT
HP
THERMOMETER
DOORS
TRIPLE HINGED
RAMPS
S/S REMOVABLE
DESIGNED TO ACCOMMODATE
ACTUAL CLEARANCE DIM.
66.5" x 26.5" x 29.5" DEEP
66"H x 26"W x 29"D RACK.
68"
34.5"
84"
32.5"
33"
/