Zanussi ZEL63W User manual

Page is loading ...

29

During Operation

• It is most important that this instruction book should

be retained with the appliance for future reference.

Should the appliance be sold or transferred, always

ensure that the book is left with the appliance in order

that the new owner can get to know the functions of the

appliance and the relevant warnings.

• This appliance has been designed for non professional

purpose in private houses only. It is meant to cook

edible foodstuff only and MUST NOT be used for any other

purposes.

• It is dangerous to alter the specification in any way.

• For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other

foodstuff could result in a fire.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious

malfunctioning. Refer to your local Electrolux Service

Centre. Always insist on genuine Electrolux spare

parts.

• Ensure that all control knobs are in the OFF position

when not in use.

• Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables are

not in contact with it and keep them far enough from

the heated parts of this appliance.

• If the appliance is out of order, disconnect it from the

electric supply.

Child Safety

• This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST NOT be allowed to tamper with the controls or play

near or with the oven.

• Accessible parts of this appliance may become hot

when it is in use. Children should be KEPT AWAY until it

has cooled.

• This appliance is not intended for use by children or

other persons whose physical, sensory or mental

capabilities or lack of experience and knowledge

prevents them from using the appliance safely without

supervision or instruction by a responsible person to

ensure that they can use the appliance safely.

ENGLISH

These warnings are provided in the interest of safety. You MUST read them carefully before

installing or using the appliance.

Important Safety Information

About Installation, Cleaning

and Manteinance

• It is mandatory that all operations required for the

installation are carried out by a qualified or competent

person, in accordance with existing rules and

regulations.

• Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance work.

• Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable is

in perfect conditions. Otherwise, contact your dealer

before proceeding with the installation.

• The manufacturer disclaims any responsability

should all the safety measures not be carried out.

Service

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious

malfunctioning. Refer to your local Service Centre.

Always insist on genuine spare parts.

Environmental Information

• After installation, please dispose of the packaging

with due regard to safety and the environment.

• When disposing of an old appliance, make it

unusable, by cutting off the cable.

• The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office, your

household waste disposal service or the shop where

you purchased the product.

These instructions are only for the countries

stated by the symbol printed on the front cover

of this instruction book.

30

Contents

For the User

For the Installer

Instruction for the User

Use of electric plates

To switch on the plates, turn the relevant knob to the

required position.

Pilot lamp

The pilot light signals the connection of the electric plate.

Electric plate with 7 position

knob

The plates are regulated by a 7 position switch:

Position 0: off

Position 1: minimum disbursement of heat

Position 6: maximum disbursement of heat

In the intermediate positions, 2-3-4-5, increasing power

values are obtained.

When cooking with fats or oils maximum

care must be taken as these can self-ignite

when over-heated.

Normal and rapid plates: For best results we

advise you to initially regulate the switch to “rapid”

to accelerate the heating of the plate and then turn

the switch to the position most suitable for the

food to be cooked.

Very low 1 To keep food hot. To melt

butter or chocolate.

Low 2 For the preparation of sauces,

casseroles, puddings, fried

eggs.

Moderate 3 For vegetable soups. To thaw

food, boil water or milk.

Medium 4 For potatoes, fresh

vegetables, pasta, minestro-

ne, stocks, doughnuts, fish.

High 5 Omelettes, steak, pancakes.

Very high 6 Steak, meat in breadcrumbs,

fried food.

Important Safety Information 29

Instruction for the User 30

Hints and tips 31

Cleaning and maintenance 31

Instruction for the Installer 32

Electrical connections 34

This appliance complies with the following

E.E.C. Directives:

- 73/23 - 90/683 (Low Voltage Directive);

- 89/336

(Electromagnetical Compatibility Directive);

- 93/68 (General Directives)

and subsequent modifications.

)

The following symbols will be found in the text to guide

you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

Guide to Use the instructions

31

Before the first use

Once the hob has been installed, it is important to remove

any protective material, which were put on in the factory.

It is important to note that the plate may smoke a little

and produce a slightly unpleasant odour when used for

the first time. This is quite normal and will disappear after

a few minutes.

Practical hints

When cooking by electric, saucepans should have a thick

base and be perfectly flat in order to ensure total contact

with the plate and, consequently, perfect conduction (Fig.

1).

Occasionally, saucepans have a thin bottom and these

loose their shape over a period of time. In this manner

two of the qualities of the electric plate are lost: the even

distribution of heat and the saving of energy. Cooking time

is also lengthier. We therefore recommend that you

acquire a battery of kitchenware specifically for use with

electric plates. Furthermore, these particular saucepans

are easy to use and clean.

Recipients in heat-resistent glass (pyrex) or in oven-proof

pottery can be placed directly on the plates if their

instructions for use are followed.

As regards the size of the saucepans: for best results,

the plate and the saucepan should have the same

diameter. The diameter of the saucepan may be slightly

larger; a smaller diameter is not advised.

Never leave the plates on without a saucepan! Switch off

the plate just before the end of cooking time. The heat

accumulated by the plate will finish cooking the food and

save energy.

Before cleaning, disconnect the appliance

To ensure the long-life of the hob, we advise you to clean

it regularly. Naturally, before cleaning the plates, allow

them to cool.

Do not acquire the bad habit of wiping over the plates with

a damp cloth whilst they are still hot. Although they will

stand up to such teatment, fragments of the cloth could

remain. The plates and their bases can, however, be

cleaned occasionally using fine sandpaper.

The base of the plates in special steel will stay

impeccable if cleaned with hot water and vinigar. We

advise you to grease the surface of the plates from time

to time with a non-acid fat (cooking oil, sewing machine

oil or vaseline). Products for care and maintenance are

available commercially.

Hints and tips

Cleaning and maintenance

Clean the control panel with a damp cloth, do not use

abrasive products. The knobs can be removed by lifting

to facilitate cleaning.

The enamelled part of the hob can be cleaned with warm

water and detergent.

Although the enamel will tollerate acids, we advise you

to quickly remove splashes of vinigar, lemon and all acid

substances.

Also immediately remove all residue of fat or other to

avoid any incrustation. If incrustations have formed leave

the crust immersed in hot water. Never use metal

brushes, knives or similar objects which could scratch

the enamel. Avoid using acid detergents. Clean steel

hobs with specific detergents.

Fig. 1

32

Technical Data

1) Normal hot plate 180 mm Ø 2,0 kW

2) Normal hot plate 145 mm Ø 1,5 kW

3) Rapid hot plate 180 mm Ø 2,0 kW

4) Rapid hot plate 145 mm Ø 1,5 kW

Total energy 7,0 kW

Voltage 230 V - 50 Hz

Hob recess dimensions

Length 550 mm.

Width 470 mm.

Instruction for the Installer

500

580

231

4

Insertion and assembly

The hobs can be installed in a kitchen unit with an

opening for insertion of the dimensions illustrated in Fig.

3.

The appliance is of type X and has been designed to be

built into or fitted next to the unit according to the

regulations in force (I.E.C. 335.2.6). The side walls of the

unit must not exceed the height of the hob. Avoid

installing the appliance in the proximity of inflammable

materials (e.g. curtains, tea towels, etc.).

The fixture of the hob to the unit must be carried

out as follows:

z Position the relevant sealings, supplied, on the edge

of the opening predisposed for installation, taking care

that the edges meet without overlapping;

z Install the hob in the opening of the unit taking care

in centring.

z Fix the hob with the appropriate clips (Fig. 2).

The edge of the hob forms a double labyrinth seal which

provides a total guarantee against the infiltration of

liquids.

Fig. 2

a) Seal

FO 0199

a

Important safety requirements

(for UK use only)

This hob must be installed in accordance with the IEE

Wiring Regulations (Current Edition).

Detailed recommendations are contained in the following

British Standards Codes Of Practice: B.S. 6172/ B.S.

5440, Par. 2 and B.S. 6891 Current Editions.

)

33

Fig. 4

FO 2166

30

20 min

80

a

b

a) Removable panel

b) Space possibly useful for

connections

Possibilities for

insertion

Kitchen unit with door

Proper arrangements must be taken in

designing the forniture unit, in order to avoid

any contact with the bottom of the hob which

can be heated when it is operated. The

recommended solution is shown in Fig. 4.

The panel fitted under the hob should be

easily removable to allow an easy access if

a technical assistance intervention is

needed.

Kitchen unit with oven

The hob recess dimensions must comply

the indication given in Figs. 3 and 5 and

must be provided with brackets to allow a

continuous supply of air.

To avoid overhating, the building in should be

carried out as shown in Figs. 3 and 6.

The hob's electric connection and the oven's

one must be carried out separately, both for

safety reasons and to allow the oven to be

easily taken off the unit.

In case a hood with lenght of 600 mm. is

fitted over the hob, the hanging furniture

units beside the hood must be placed at 550

mm. minimum from the hob, to allow the

fitting and the correct use of the lid, if

required (Fig. 3).

Fig. 5 Fig. 6

FO 0939 FO 0938

120 cm

2

180 cm

2

360 cm

2

50 cm

2

Fig. 3

34

Electrical connections

Supply Cable Specifications

Connection Min. size Cable / flex Fuse

via Cable/flex type

• Cooker 6 mm

2

PVC/PVC 30 A

Control twin and

Circuit earth

Min. size Cable/flex Cable / flex type Fuse

2.5 mm

2

H05 RR-F / H05V2V2 30 A

H05 BB-F

FO 0488

For UK use only

This hob is designed to be connected to a 230 V 50 Hz

AC electrical supply.

For Europe use only

Electrical connection to the

terminal box

The appliance is fitted with a five pole terminal box whose

cables are predisposed for a 230 V monophase function

(Fig. 7).

In case of a different voltage, carry out the connection

as shown in Fig. 8.

The earth wire should be connected to the terminal

marked by the sign .

After having connected the wire to the terminal secure it

with a cable clip.

Supply Cable Specifications

Type of Monophase Triphase Triphase Y Biphase Y

connection 3f. + neutre 2f. + neutre

Connection

cable with

terminal box

Network

tension 230 V

~

230 V

~

400 V

~

3N 400 V

~

2N

Heating

element 230 V 230 V 230 V 230 V

tension

3 X 2,5 mm

2

4 X 1,5 mm

2

5 X 1,5 mm

2

4 X 1,5 mm

2

18 A 13 A 13 A 13 A

3

2

1

R

21

R

3

21

R

T

S

32

1

RS

All-electric

appliance

4

S

4

T

3

S

4

N

4

N

Fig. 8 - CHOICE OF CONNECTION CABLE AND FUSE GUAGE (in Amps) - For

Europe use only

Fig. 7

35

Electrical connections (UK and

Europe)

The hob should be connected to a double pole switch

with a minimum gap of 3 mm. between the switch

contacts and of a type suitable for the required load in

compliance with the current electric regulations. The

switch should be sited within 2m of the hob and be easily

accessible upon completion of the installation.

The switch must not break the yellow and green earth

cable at any point.

Ensure that the hob supply cord does not come

into contact with surfaces with temperatures

higher than 50 deg. C.

)

Any electrical work required to install this hob

should be carried out by a qualified electrician or

competent person, in accordance with the current

regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these

safety measures not be observed.

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the hob rating

plate. The rating plate is located on the bottom of the

hob. A copy is attached on the back cover of this book.

The hob is supplied without supply cord. A 3 core flexible

supply cord must be fitted, in accordance with the

specification given in the relevant tables.

1) Remove the mains terminal cover plate from

the underside of the hob, to expose the mains

terminal block.

2) Loosen the two cable clamp screws and lift the

top section of the clamp enough to allow the

cable to be passed through.

3) Connect the red (live) wire to the terminal which

is marked with the number 1.

4) Connect the black (neutral) wire to the terminal

which is marked with the number 4.

5) After fitting a green or yellow/green sleeve over

the bare copper wire (earth wire), connect the

exposed end to the terminal which is marked

with the earth symbol or with the number 5.

NOTE:

The earth wire should be about 2 cm. longer

than the live and neutral wires.

6) Secure the cable by means of the clamp screws

and refit the terminal block cover.

Page is loading ...

37

Declaration of guarantee terms

Belgium

Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services

department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not,

however, be reduced as a result.

This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the Civil

Code. The statutory rights that the consumer has under this legislation are not affected by this declaration of guarantee

terms.

This declaration does not affect the vendor’s statutory warranty to the end user. The appliance is guaranteed within the

context of and in adherence with the following terms:

1. In accordance with provisions laid down in paragraphs 2 to 15, we will remedy free of charge any defect that occurs

within 24 months from the date the appliance is delivered to the first end user.

These guarantee terms do not apply in the event of use for professional or equivalent purposes.

2. Performing the guarantee means that the appliance is returned to the condition it was in before the defect occurred.

Defective parts are replaced or repaired. Parts replaced free of charge become our property.

3. So as to avoid more severe damage, the defect must be brought to our attention immediately.

4. Applying the guarantee is subject to the consumer providing proof of purchase showing the purchase and/or delivery

date.

5. The guarantee will not apply if damage caused to delicate parts, such as glass (vitreous ceramic), synthetic

materials and rubber, is the result of inappropriate use.

6. The guarantee cannot be called on for minor faults that do not affect the value or the overall reliability of the appliance.

7. The statutory warranty does not apply when defects are caused by:

- a chemical or electrochemical reaction caused by water,

- abnormal environmental conditions in general,

- unsuitable operating conditions,

- contact with harsh substances.

8. The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. Nor will

the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect

the assembly instructions or directions for use.

9. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that

result from the addition of non-original accessories or spare parts are not covered by the guarantee.

10. Appliances that are easy to transport may be delivered or sent to the consumer services department. Home repairs

are only anticipated for bulky appliances or built-in appliances.

11. If the appliances are built-in, built-under, fixed or suspended in such a way that removing and replacing them in the

place where they are fitted takes more than half an hour, the costs that result therefrom will be charged for.

Connected damage caused by these removal and replacement operations will be the responsibility of the user.

12. If, during the guarantee period, repairing the same defect repeatedly is not conclusive, or if the repair costs are

considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another

appliance of the same value.

In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has

been used.

13. A repair under guarantee does not mean that the normal guarantee period will be extended nor that a new guarantee

period begins.

14. We give a twelve month guarantee for repairs, limited to the same defect.

15. Except in the event where liability is legally imposed, this declaration of guarantee terms excludes any compensa-

tion for damage outside the appliance for which the consumer wishes to assert his rights. In the event of legally

admitted liability, compensation will not exceed the purchase price paid for the appliance.

These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user

must first make sure that they satisfy the technical conditions (e.g.: voltage, frequency, installation instructions, etc.) for the

country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased

abroad, the user must first ensure that they meet the qualifications required in Belgium. Non-essential or requested

adjustments are not covered by the guarantee and are not possible in all cases.

Our consumer services department is always at your disposal, even after the guarantee period has expired.

38

Address for our consumer services department:

BELGIUM

Tel: Fax:

Electrolux Home Products Belgium Consumer services02/363.04.4402/363.04.00

ELECTROLUX SERVICE 02/363.04.60

Bergensesteenweg 719

1502 Lembeek

E-mail: [email protected]

GRAND-DUCHÉ DE LUXEMBOURG

ELECTROLUX HOME PRODUCTS Consumer services 00 35242431-1 0035242 431-360

Rue de Bitbourg. 7

L-1273 Luxembourg-Hamm

E-mail: [email protected]

39

Guarantee/Customer Service

UK only

Standard guarantee conditions

We, Zanussi-Electrolux, undertake that if within 12 months of the date of the purchase this Zanussi-Electrolux appliance

or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair

or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:

· The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.

· The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s

instructions.

· The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised

by us.

· Electrolux Service Force Centre must undertake all service work under this guarantee.

· Any appliance or defective part replaced shall become the Company’s property.

· This guarantee is in addition to your statutory and other legal rights.

Exclusions

· Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable

parts of glass or plastic.

· Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United

Kingdom.

· Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.

· Products of Electrolux manufacturer that are not marketed by Electrolux.

Service and Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service

Force Centre by telephoning

0870 5 929 929

Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.

For the address of your local Service Force Centre and further information about Service Force, please visit the website

at

www.serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading “Something not working”

When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and postcode.

2.Your telephone number.

3. Clear concise details of the fault.

4. The model and Serial number of the appliance (found on the rating plate).

5.The purchase date.

Please note a valid purchase receipt or guarantee documentation is required for in guarantee service calls.

Customer Care

For general enquiries concerning your Electrolux appliance, or for further information on Electrolux products please

contact our Customer Care Department by letter or telephone at the address below or visit our website at

www.electrolux.co.uk

Customer Care Department

Electrolux Major Appliances

Addington Way

Luton

Bedfordshire, LU4 9QQ

Tel: 08705 727 727 (*)

(*) Calls may be recorded for training purposes

40

This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period

specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries

listed below the appliance guarantee will move with you subject to the following qualifications:

• The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of

a valid purchase document issued by the seller of the appliance.

• The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your new country

of residence for this particular model or range of appliances.

• The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user.

• The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home,

i.e. is not used for commercial purposes.

• The appliance is installed in accordance with all relevant regulations in force within your new country of residence.

The provisions of this European Guarantee do not affect any of the rights granted to you by law.

European guarantee

Page is loading ...

Zanussi ZEL63W, ZEL63X User manual

Related papers

Other documents