#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
•Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
#12
#10
IMPORTANT: READ CAREFULLY
Baldwin hinges are extruded from the finest quality brass and individually machined to close
tolerances. The leaves from each half-pair are not interchangeable with those of any other half-pair.
To ensure smooth operation and prevent binding, do not mix hinge leaves during installation.
Hinges are supplied with brass screws to ensure proper matching of finish.
To prevent damage to the screws during installation follow the steps below:
1. Caution: If you are using power tools, do not use high torque settings to install
brass screws.
• Most tool and equipment manufacturers publish torque
recommendations--these must be followed.
• Results may vary due to unique conditions.
2. Use drilled pilot holes.
• Installation of brass screws requires drilling of pilot holes. Refer to
chart below for proper pilot hole size for your application.
3. Use proper lubrication for the screw threads.
• We recommend soap, petroleum jelly, or paraffin (candle wax),
be applied to the screw threads before installation into hardwoods.
Hinge Catalog Screw Pilot Drill Size Pilot Drill Size
Number Size for Hardwoods for Softwoods
1030; 1035
1135; 1140 #10 5/32” 1/8”
1435; 1440
1040; 1041
1045; 1046 #12 3/16” 5/32”
1050; 1051
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
Consumer Help Line 1-800-566-1986
Visit www.baldwinhardware.com for a complete warranty statement.
PK.1003A (12/08)
-
1
Baldwin 1140.150.I Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Baldwin 5225.003.ENTR User manual
-
Baldwin 3863.150.SP Installation guide
-
-
-
Baldwin Door Hardware 85355056LENT Installation guide
-
Baldwin 85390.003 Installation guide
-
Baldwin 85390.003 Installation guide
-
-
Baldwin PRIVACY Series Installation Instructions Manual
-
Other documents
-
Laura Ashley KROS2275 Installation guide
-
-
-
Kwikset 802AVH LIP L03 Installation guide
-
Paraffin Wax Works 301476 Important Instructions
-
Sharper Image 11-1606 Owner's manual
-
HoMedics ParaSpa SELECT User manual
-
Remington PFS-600 User manual
-
E-flite F-4 Phantom 32 DF Assembly Manual
-
Craftex CX Series CX615 Owner's manual
