Kohler 14297-MP1 Installation guide

Type
Installation guide

This manual is also suitable for

Kohler K-14297-MP1 is an undercounter lavatory designed for installation in a countertop with the help of clamps and fasteners. It requires a countertop with preinstalled anchors and the use of silicone sealant for a leak-proof seal. It is not compatible with adhesives or adhesive sealants. The installation process involves applying sealant, positioning the lavatory, and securing it to the countertop. Once installed, it offers a stylish and functional basin for everyday use in bathrooms.

Kohler K-14297-MP1 is an undercounter lavatory designed for installation in a countertop with the help of clamps and fasteners. It requires a countertop with preinstalled anchors and the use of silicone sealant for a leak-proof seal. It is not compatible with adhesives or adhesive sealants. The installation process involves applying sealant, positioning the lavatory, and securing it to the countertop. Once installed, it offers a stylish and functional basin for everyday use in bathrooms.

Installation Guide
Undercounter Lavatory
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-14297
1114039-2-A
Tools and Materials
Before You Begin
IMPORTANT! Bronze is easily scratched. Avoid contact with metal
objects.
Observe all local plumbing and building codes.
Provide your countertop manufacturer with your lavatory model
number when ordering your countertop.
Countertop manufacturer should preinstall the anchors into the
underside of the countertop. Use the anchors and fasteners
provided by the countertop manufacturer and the clamps
provided with your lavatory.
NOTE: Do not use adhesives or adhesive sealants with this product.
Only use silicone sealant.
Install so future removal from underneath the countertop is
possible. This will avoid countertop damage.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
Verify cabinet clearance beneath the countertop to accommodate
lavatory basin, faucet valving, and drain piping.
Install the faucet to the countertop according to the
manufacturer’s instructions.
Rags
Silicone Sealant
Sealant Tape
1114039-2-A 2 Kohler Co.
2. Install the Lavatory
Apply sealant tape to the threads of the drain tailpiece.
Thread the drain tailpiece into the underside of the lavatory.
NOTE: Do not use adhesives or adhesive sealants with this product.
Only use silicone sealant.
Apply a continuous bead of silicone sealant to the top surface of
the lavatory rim where it will contact the countertop.
Position the lavatory and gently press into place.
Loosely secure the lavatory to the countertop using the clamps
provided with the lavatory and the fasteners provided by the
countertop manufacturer.
Verify the lavatory position within the cutout before tightening
the clamps. Draw the lavatory rim up against the countertop until
it is snug. Do not overtighten.
Immediately wipe away any excess sealant and fill any voids as
needed. Allow the sealant to set for 30 minutes before proceeding.
Connect and tighten the trap to the drain. Complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Apply silicone sealant.
Clamp
Fastener (provided by
countertop manufacturer)
Drain Tailpiece
Kohler Co. 3 1114039-2-A
USA/Canada: 1-800-4KOHLER
México: 001-877-680-1310
kohler.com
©2009 Kohler Co.
1114039-2-A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Kohler 14297-MP1 Installation guide

Type
Installation guide
This manual is also suitable for

Kohler K-14297-MP1 is an undercounter lavatory designed for installation in a countertop with the help of clamps and fasteners. It requires a countertop with preinstalled anchors and the use of silicone sealant for a leak-proof seal. It is not compatible with adhesives or adhesive sealants. The installation process involves applying sealant, positioning the lavatory, and securing it to the countertop. Once installed, it offers a stylish and functional basin for everyday use in bathrooms.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI