Zanussi ZV210R User manual

Brand: Zanussi

Model: ZV210R

Category: Fridge-freezers

Type: User manual

CONGELATEUR

FREEZER

CONGELADOR

ZV 210 R

NOTICE D’UTILISATION

INSTRUCTION BOOKLET

LIBRO DE INSTRUCCIONES

MANUAL DE INSTRUÇÕES

2222 060-33

Page is loading ...

DŽgivrage

PŽriodiquement (toutes les 2 ou 3 semaines) ˆ lÕaide

de la spatule en plastique livrŽe avec lÕappareil,

grattez la mince couche de givre qui recouvre les

parois. Il nÕest pas nŽcessaire de dŽbrancher

lÕappareil et dÕenlever les produits contenus dans ce

compartiment.

NÕutilisez jamais de couteau ou dÕobjet

mŽtallique pour gratter la couche de givre,

vous risquez de dŽtŽriorer

irrŽmŽdiablement lÕŽvaporateur.

Une ou deux fois par an, ou chaque fois que

lÕŽpaisseur du givre exc•de 5 mm environ, il est

recommandŽ de procŽder, au dŽgivrage complet .

Pour dŽgivrer compl•tement

lÕappareil

1. Choisissez le moment o• votre appareil est peu

garni.

2. Comme une ŽlŽvation de tempŽrature peut

altŽrer les denrŽes congelŽes, actionnez la

congŽlation rapide 12 heures avant dÕeffectuer le

dŽgivrage pour assurer une rŽserve de froid (une

baisse de tempŽrature des aliments).

3. Mettez le thermostat sur la position Ç

4. DŽbranchez lÕappareil.

5. Sortez les bacs ˆ gla•ons et Žventuellement les

denrŽes congelŽes. Enveloppez celles-ci dans

plusieurs feuilles de papier journal, ou mieux,

dans des emballages isothermes. Conservez-les

dans un endroit frais.

6. Maintenez la porte ouverte.

7. Utilisez la spatule comme goutti•re. Placez au-

dessous un rŽcipient dans lequel sÕŽcoulera lÕeau

de dŽgivrage.

Le dŽgivrage terminŽ, rebranchez lÕappareil et

remettez-le en service ou alors, si vous le souhaitez,

procŽdez au nettoyage de lÕappareil.

Deux heures plus tard, replacez les produits

surgelŽs et congelŽs (sÕil y a lieu).

☞

D068

En cas dÕabsence prolongŽe ou de

non-utilisation

Ramenez le thermostat sur la position Ç

È.

DŽbranchez, videz, dŽgivrez et nettoyez lÕappareil.

Maintenez la porte entrouverte pendant toute la

durŽe de non-utilisation.

Si toutefois, vous nÕavez pas la possibilitŽ de

dŽbrancher et vider lÕappareil, assurez-vous que

quelquÕun puisse venir vŽrifier rŽguli•rement le bon

fonctionnement de celui-ci et ceci en tenant compte

de son autonomie de fonctionnement.

En cas dÕarr•t de fonctionnement

Si la panne est de courte durŽe, il nÕy a aucun risque

dÕaltŽration pour les aliments. Abstenez-vous

cependant dÕouvrir la porte.

Si la panne doit se prolonger, transfŽrez les produits

surgelŽs et congelŽs dans un autre appareil.

LÕautonomie de fonctionnement de votre appareil est

de 26 heures. Cette durŽe est sensiblement

raccourcie si lÕappareil est peu rempli.

D•s que vous constatez un dŽbut de dŽcongŽlation,

consommez les aliments le plus rapidement

possible, ou recongelez-les apr•s les avoir cuits

(aliments crus).

ENTRETIEN ET NETTOYAGE

Nettoyage

Ne procŽdez au nettoyage quÕapr•s avoir

dŽbranchŽ lÕappareil.

II est indispensable de maintenir votre appareil en

parfait Žtat de propretŽ.

Nettoyage intŽrieur

Il est recommandŽ de nettoyer le congŽlateur

chaque fois que vous procŽdez au dŽgivrage

complet.

Videz lÕappareil de ses accessoires.

Lavez les parois et accessoires avec de lÕeau ti•de

et un dŽtergent liquide inodore (produit utilisŽ pour la

vaisselle).

Rincez et sŽchez soigneusement.

Nettoyage extŽrieur

Lavez lÕensemble de la carrosserie ˆ lÕeau tiede

savonneuse. Rincez et sŽchez.

Lavez le joint de porte en caoutchouc sans omettre

de nettoyer Žgalement sous le joint.

De temps en temps, dŽpoussiŽrez le condensateur

(grille situeŽ ˆ lÕarriere de lÕappareil), ˆ lÕaide dÕun

aspirateur ou dÕune brosse.

Rear spacers

In the bag with the documentation, there are two

spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the

screw head, then re-tighten the screws.

Door reversal

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

1. dismantle the lower hinge (1), and the support

foot (2);

2. unscrew the left front foot (3) and reposition on

the opposite side;

3. slide the door out from pin (G),unscrew the pin

and reposition on the opposite side;

4. unscrew the two screws which mask the holes for

fixing the hinge from the left front side;

5. reassemble the door;

6. reassemble the lower hinge (1), and the support

foot (2) on the opposite side;

7. dismantle the handle and reassemble it on the

opposite side.Cover the holes left open with the

plugs contained in the documentation pack.

Warning:

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold (i.e.

in Wõnter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket or accelerate this process by heating up the

part involved with a normal hairdrier.

D594

D715 PIED/M

D162

La fabrication de votre appareil a fait lÔobjet de nombreuses vŽrifications. Cependant, si vous constatez une

anomalie de fonctionnement, consultez le tableau ci-dessous avant dÕappeler le service apr•s vente.

Sympt™mes

LÕappareil vibre

LÕappareil ne fait pas suffisamment de froid

LÕ appareil sÕarr•te de fonctionner

Voyant alarme allumŽ

Solutions

VŽrifiez que:

¥ LÕappareil est correctement calŽ (voir chapitre

Installation).

¥ LÕappareil nÕest pas installŽ contre une cloison

rŽsonnante.

¥ LÕappareil nÕest pas situŽ trop pr•s des meubles.

VŽrifiez que:

¥ La tempŽrature ambiante du local o• est situŽ

lÕappareil nÕest pas trop basse.

¥ Trop de produits frais nÕont pas ŽtŽ introduits en

m•me temps dans le compartiment congŽlateur.

VŽrifiez que:

¥ Le thermostat nÕest pas sur la position arr•t

Ò0Ó.

¥ La prise est effectivement branchŽe.

¥ Les fusibles sont en bon Žtat et nÕont pas disjonctŽ.

VŽrifiez que:

¥ LÕ appareil est correctement installŽ.

¥ La porte est bien fermŽe et quÕelle nÕa pas ŽtŽ

ouverte trop long-temps.

¥ La tempŽrature nÕest pas assez basse dans

lÕappareil.

¥ La couche de givre nÕest pas trop Žpaisse.

Si aucun de ces dŽfauts nÕest observŽ, il convient de consulter tr•s rapidement le service apr•s vente de votre

magasin-vendeur afin dÕŽviter toute altŽration des aliments. Donnez-lui la rŽfŽrence compl•te de votre appareil:

ces renseignements figurent sur la plaque signalŽtique situŽe ˆ lÕintŽrieur de lÕappareil, en bas, sur le c™tŽ

gauche.

EN CAS DÕANOMALIE DE FONCTIONNEMENT

¥ Before calling your local dealer for servicing

assistance, check the following points to see if

you may not resolve the problem yourself:

¥ Make sure that the freezer is plugged into the

wall socket correctly, and that electrical current

arrives to the freezer without interruption.

¥ Control the thermostat setting.

¥ In the event that the freezer makes excessive

noise or vibration, make sure that it is not in direct

contact with the wall or adjacent furniture.

¥ If defective operation continues after these

controls, call your local Service Network and

provide all the data listed on the rating plate:

model, serial number, etc.

CUSTOMER SERVICE AND SPARE PARTS

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Best performance is obtained with

ambient temperature between

+18¡C and +43¡C(class T);

+18¡C and +38¡C (class ST);

+16¡C and +32¡C (class N);

+10¡C and +32¡C (class SN).

The class of your appliance is shown on its

rating plate.

Ensure that air can circulate freely around the back

of the cabinet. To ensure best performance, if the

appliance is positioned below an overhanging wall

unit, the minimum distance between the top of the

cabinet and the wall unit must be at least 100 mm

(A). Ideally, however, the appliance should not be

positioned below overhanging wall units (B).

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet.

Important

It is essential that the appliance be connected to an

efficient earth tap. For this purpose the supply cable

plug incorporates a special earth contact. If the

sockets of your domestic wiring system are not

earthed, have the appliance connected to a separate

earth wire by a qualified electrician in accordance

with existing safety regulations.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with EEC directive

number 87/308 of 2/6/87 relative to radio

interference suppression.

This appliance complies with the following

E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent mod)fications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

100 mm10 mm

10 mm

NP006

Garantie contractuelle

Pendant 1 an ˆ compter de la mise en service, le

constructeur remplacera les pi•ces dŽfectueuses,

sauf dans les cas prŽvus au chapitre ÒRŽservesÓ.

Conditions dÕapplication:

Pour lÕapplication de cette garantie, vous devez vous

adresser au distributeur qui vous a vendu lÕappareil

et lui prŽsenter le Certificat de Garantie. En

complŽment, le Distributeur Vendeur pourra ou non

prendre ˆ sa charge les frais de main dÕoeuvre, ainsi

que les frais de dŽplacement et de transport, selon

les conditions de vente quÕil pratique.

RŽserves:

Nous attirons votre attention sur le fait que cette

garantie ne pourra •tre appliquŽe:

¥ si les dŽtŽriorations proviennent dÕune cause

Žtrang•re ˆ lÕappareil (chocs, variations

anormales de la tension Žlectrique, etc.) ou du

non-respect des conditions dÕinstallation ou

dÕutilisation indiquŽes dans cette Notice

dÕUtilisation, fausse manoeuvre, nŽgligence,

installation dŽfectueuse ou non conforme aux

r•gles et prescriptions imposŽes par les

organismes de distribution de lÕElectricitŽ, de

lÕEau, du Gaz, etc.

¥ si lÕutilisateur a apportŽ une modification sur le

matŽriel ou enlevŽ les marques ou numŽros de

sŽrie.

¥ si une rŽparation a ŽtŽ effectuŽe par une

personne non agrŽŽe par le constructeur ou le

vendeur.

¥ si lÕappareil a ŽtŽ utilisŽ ˆ des fins commerciales

ou industrielles ou pour dÕautres buts que des

buts mŽnagers pour lesquels il a ŽtŽ con•u.

¥ si lÕappareil a ŽtŽ achetŽ ou rŽparŽ hors du

territoire fran•ais.

Garantie lŽgale

Les dispositions de la garantie contractuelle ne sont

pas exclusives du bŽnŽfice, au profit de lÕacheteur,

de la garantie lŽgale pour dŽfauts et vices cachŽs, la

dite garantie sÕappliquant en tout Žtat de cause dans

les conditions des articles 1641 et suivants du Code

Civil.

En cas dÕanomalie de fonctionnement, reportez-

vous ˆ la rubrique ÒEN CAS DÕANOMALIE DE

FONCTIONNEMENTÓ. Si malgrŽ toutes les

vŽrifications, une intervention sÕav•re nŽcessaire, le

vendeur de votre appareil est le premier habilitŽ ˆ

intervenir. A dŽfaut (dŽmŽnagement de votre part,

fermeture du magasin o• vous avez effectuŽ

lÕachat...), veillez consultez lÕAssistance Technique

Consommateurs qui vous communiquera alors

lÕadresse dÕun Service Apr•s-Vente.

En cas dÕintervention sur votre appareil, exigez

du service apr•s-vente Ies pi•ces de rechange

certifiŽes Constructeur

Plaque signalŽtique

En appelant un Service Apr•s Vente, indiquez-lui le

mod•le, le numŽro de produit et le numŽro de sŽrie

de lÕappareil. Ces indications figurent sur la plaque

signalŽtique situŽe sur votre appareil.

CONDITIONS DE GARANTIE

SERVICE APRES-VENTE

MAINTENANCE

Unplug the appliance before carrying out

any maintenance operation.

Internal cleaning

Never use metal objects for clearing your appliance

as it may get damaged.

When performing a complete defrosting, wash the

internal surfaces of the freezer with lukewarm water

and bicarbonate; rinse and then accurately dry.

External cleaning

Wash the outer body with lukewarm water and soap.

Periodically use a clearing polish to keep the outer

body shining. Dust the condenser located behind the

freezer with a soft brush or a vacuum cleaner. An

excessive accumulation of dust might compromise

the freezerÕs efficiency.

Extended periods of non-operation

Whenever the freezer is not to be used for an

extended period of time, disconnect it from the wall

socket and empty and clean the freezer. Remember

to leave the door open for the entire period of time in

which the freezer is not to be used.

Defrosting

Scrape away the frost with the plastic scraper

provided with the freezer when this layer arrives to

approximately 4 mm in height. For this operation,

you do not need to unplug the freezer or remove all

frozen foods. Whenever the layer of frost exceeds 4

mm in thickness, you must proceed to a complete

defrosting. Take advantage of the periods when you

do not trave too much food in storage to do this by

proceeding as follows:

1. Empty the freezer and temporarily store the

frozen food removed in a cool place, wrapped in

several sheets of newspaper.

2. Set the thermostat to the ÇOÈ position or unplug

the freezer from the wall socket.

3. Keep the freezer door open.

4. Use the scraper together with a collecting tray

and insert it in the lower central part of the freezer

as shown in Figure.

5. The collecting tray should be positioned directly

below in order to receive the water which will exit

during defrosting. Afterwards, dry all freezer

surfaces with care.

6. Keep the scraper for future use.

7. Re-connect the plug and set the freezer to the

quickfreezing position. After two hours you may

replace the frozen foods previously removed.

Important

Never use knives or metal objects to scrape away

accumulated frost.

An increase in the surface temperature of the frozen

foods during defrosting will notable diminish the

duration of their conservation.

D068

CARACTERISTIQUES TECHNIQUES

Hauteur mm 1395

Largeur mm 545

Profondeur mm 600

Pouvoir de congŽlation kg/24h 22

Autonomie, en cas de panne, heures 26

Cet appareil est conforme aux Directives

Communautaires suivantes:

-73/23 CEE 19/02/73 (Basse Tension) et

modifications successives;

-89/336 CEE 03/05/89 (CompatibilitŽ

ElectromagnŽtique) et modifications successives.

Emplacement

Placez de prŽfŽrence votre appareil loin dÕune

source de chaleur (chauffage, cuisson ou rayons

solaires trop intenses).

Veillez ˆ ce que lÕair circule librement tout autour de

lÕappareil. Si toutefois vous dŽsirez placer lÕappareil

dans une niche ou directement sous un ŽlŽment, il

est indispensable de laisser un espace de 100 mm

entre le dessus de lÕappareil et lÕŽlŽment supŽrieur.

Calez soigneusement lÕappareil en agissant sur les

pieds rŽglables, de telle sorte quÕil soit lŽg•rement

inclinŽ vers lÕarri•re pour faciliter la fermeture des

portes.

Pour le bon fonctionnement de votre appareil, la

tempŽrature ambiante du local doit •tre comprise

entre +18¡C et +43¡C. Au-delˆ de ces

tempŽratures, ses performances peuvent sÕen

trouver diminuŽes.

Fixation des entretoises arri•re

Pour Žviter que le condenseur ne touche le mur,

vous devez fixer les 2 entretoises jointes ˆ la notice

dÕutilisation.

Pour cela:

IDesserrez les vis et introduisez les entretoises

sous la t•te de vis, puis resserrez.

100 mm10 mm

10 mm

NP006

D594

A LÕATTENTION DE LÕINSTALLATEUR

INSTALLATION

Hints for freezing

¥ All products to be frozen must be fresh and of

excellent quality.

¥ Each freezing package must be adjusted to the

familyÕs consumption quantity in order to be used

just once.

¥ Small-sized freezing packages allow a more rapid

and uniform freezing.

¥ Do not forget that once frozen foods trave thawed

out, they spoil rapidly.

¥ Low-fat content foods are better conserved in the

freezer than those with higher fat content. Salt

(whenever present) reduces the duration of

satisfactory conservation.

¥ Foods to be frozen must be enclosed in air-tight

sacks or containers especially indicated for this

purpose.

¥ Close these sacks or containers tightly to

eliminate all air.

¥ Never piace bottles or cans of carbonated

beverages in the freezer. These might explode.

¥ Never introduce hot foods or liquids.

¥ Never fill the freezing sacks or containers with

covers to the brim.

¥ Do not consume certain products (popsicles, etc.)

immediately after removing them from the

freezer,because their extremely low temperature

might cause burns.

¥ Indicate the freezing date on every sack or

container as a means of controlling conservation

times.

¥ Never open the freezer door or introduce new

foods to be frozen whenever a Quick-freezing

phase is already in progress.

HINTS

Hints for storage of frozen food

¥ Always check the preparation date indicated on

the frozen foods you buy and respect the

expiration time provided by the producer.

¥ Do not open the freezer door too often and leave

it open only for the minimum time necessary.

Unnecessary increases in temperature will

notably reduce the duration of the frozen food

conservation.

¥ Make sure that all frozen food packages are

intact; otherwise the food may trave spoiled.

¥ If such packages present signs of swelling or

humidity marks, this means that the food has not

been conserved correctly, implying that the

product has lost some of its original quality.

¥ When buying frozen foods, carry them in a

thermally insulated shopping bag whenever

possible. In any case, always purchase frozen

foods at the end of your shopping. Wrap the

frozen foods in newspaper and then put them into

the freezer as soon as you arrive home.

¥ Always check the frozen foods you buy carefully

at the moment of purchase, because even

partiallythawed foods must not be re-frozen but

must be consumed within 24 hours of purchase.

RŽversibilitŽ de la porte

La porte de ce congŽlateur est reversible:

son sens dÕouverture peut •tre modifiŽ en

fonction du souhait de lÕutilisateur.

Avant dÕeffectuer les opŽrations ci-dessous,

dŽbranchez lÕappareil.

Pour changer le sens dÕouverture de la

porte, procŽdez de la mani•re suivante:

1) DŽbranchez IÕappareil

2) Enlevez la charni•re infŽrieure (1), et le pied (2).

3) DŽvissez le pied (3) avant gauche et vissez-le sur

lÕautre c™tŽ.

4) DŽgagez la porte du pivot (G), dŽvissez ce

dernier et vissez-le sur le c™tŽ opposŽ.

5) Remontez la porte.

6) Remontez la charni•re infŽrieure (1) et le pied (2)

sur le c™tŽ opposŽ.

7)DŽvissez la poignŽe. Remontez-la de lÕautre c™tŽ

apr•s avoir percŽ les caches avec un poin•on.

Couvrez les trous libres avec les caches contenus

dans le sachet de la documentation.

La rŽversibilitŽ de la porte une fois effectuŽe,

contr™lez que le joint magnŽtique adh•re ˆ la

carrosserie. Si la tempŽrature ˆ lÕintŽrieur de la piece

est trop basse (en hiver, par exemple), il se peut que

le joint nÕadh•re pas parfaitement. Dans ce cas, si

on ne veut pas attendre que le joint reprenne sa

dimension naturelle apr•s un certain temps, on

pourra accŽlŽrer ce processus en chauffant la partie

intŽressŽe ˆ lÕaide dÕun s•che-cheveux.

☞

D162

Important

Notre responsabilitŽ ne saurait •tre engagŽe pour tout incident ou accident provoquŽ par une mise ˆ la

terre inexistante ou dŽfectueuse.

Branchement Žlectrique

Votre appareil est prŽvu pour fonctionner sur un courant 220-230V monophasŽ. Utilisez pour le branchement

Žlectrique un socle de prise de courant de 10/16 amp•res comportant une borne de mise ˆ la terre, laquelle

sera raccordŽe conformŽment ˆ la Norme NF-C 15.100 et aux prescriptions de lÕE.D.F.

D715 PIED/M

Temperature regulation

The temperature is automatically regulated and can

be increased to achieve a higher temperature

(warmer) by rotating the thermostat knob towards

minimum or reduced (colder) by rotating the knob

towards maximum. However, the exact setting

should be chosen keeping in mina that the

temperature inside the refrigerator depends on:

room temperature;

how often the door is opened;

the quantity of food stored;

location of appliance.

A medium setting is generally the most suitable.

To stop operation, simply turn the thermostat knob to

position Ç

È.

Fast freezing

For quick-freezing, turn the N/S knob (A) to the ÇSÈ

symbol. The quick-freezing indicator light (D) will

then light up.

Warning light

Warning light (E) lights up when the temperature

inside the freezer compartment has increased to a

value which might endanger the long-term storage of

food in the compartment. When the appliance is

switched on for the first time or when food is placed

in the compartment for freezing, it is normal for this

light to remain on until the temperature has reached

the level required for correct storage.

Freezing food

Set the freezer to quick-freezing operational status.

Wait at least 3 hours before introducing fresh foods

into the freezer if it has only recently been turned on.

If the freezer has already been working for some

time, turn the respective knob to the ÇSÈ position at

least 24 hours before introducing the food into the

freezer in order to ensure better freezing results.

This period of time may be shortened according to

the quantity of food. When quick-freezing is being

performed, the compressor works continuously,

employing all of its refrigerating power to the

maximum. Keep the knob as it is for another 24

hours after the introduction of the food into the

freezer and then return the knob to the ÇNÈ position.

Bear in mind the freezing capacity of your freezer;

that is, the maximum quantity of food that may be

frozen in 24 hours. This freezing capacity is 22 kg.

Distribute the packages in the two upper baskets.

Arrange the foods to be frozen in the upper

compartments. When the necessary freezing time

has elapsed, distribute the newly-frozen foods into

the drawers to free the compartments for new foods

to be frozen.

Important

When electrical current happens to be cut off, the

freezer door must not be opened. If the power failure

is short (up to 6-8 hours) and the freezer is full, there

is no risk that the food will spoil. If the power failure

lasts longer, the food must be consumed as rapidly

as possible, or otherwise cooked and re-frozen

again.

Note

On the inner door you will find a list of foods followed

by a number. These numbers indicate the maximum

period of time for which the food in question may be

conserved (in months).

Frozen food storage

When the freezer is being turned on for the first time,

or after a prolonged period of disuse, turn the N/S

knob to the Quick-freezing position and then wait at

least two hours before introducing the food to be

conserved. You may then return the knob to the ÇNÈ

position. This two-hour waiting period may be

avoided if the freezer has already been in operation.

Thawing out frozen foods

Frozen foods must be allowed to thaw out before

use either in the refrigerator (meat, poultry, fish, etc.)

or at room temperature (ali other foods) according to

the available time. Frozen products which come in

small-sized or separate packages may be cooked

directly without thawing; obviously, in this case, the

cooking time will fast a little longer.

Ice-cube production

Fill the trays with water to 3/4 of their height, to

permit the expansion of the ice, then put them in the

space below the quick-freezing compartment (see

the diagram). If the water in your area is rich in

minerai salts (limestone, in particular), we advise you

to use noncarbonated mineral water for the

production of ice cubes. The ice-cubes may be

Cold accumulator

A cold accumulator is supplied in the freezer; this

increases the leght of time for which food will keep in

the event of the power failure or breakdown. It must

be placed in the top drawer.

General Safety

¥ This appliance is designed to be operated by

adults. Children should not be allowed to tamper

with the controls or play with the product.

¥ It is dangerous to alter the specifications or

modify this product in any way.

¥ Before any cleaning or maintenance work is

carried out, be sure to switch off and unplug the

appliance.

¥ This appliance is heavy. Care should be taken

when moving it

¥ ce lollies can cause frost burns if consumed

straight from the appliance.

Service/Repair

¥ Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person

¥ This product should be serviced by an authorized

Service Centre, and only genuine spare parts

should be used.

¥ Under no circumstances should you attempt to

repair the appliance yourself. Repairs carried out

by inexperienced persons may cause injury or

more serious malfunctioning. Refer to your local

Service Centre, and always

Use

¥ The domestic refrigerators and freezers are

designed to be used specifically for the storage of

edible foodstuffs only.

¥ Frozen food must not be re-frozen once it has

been thawed out.

¥ ManufacturersÕ storage recommendations should

be strictly adhered to. Refer to relevant

instructions.

¥ The inner lining of the appliance consists of

channels through which the refrigerant passes. If

these should be punctured this would damage

the appliance beyond repair and cause food loss.

DO NOT USE SHARP INSTRUMENTS to scrape

off frost or ice. Frost may be removed by using

the scraper provided. Under no circumstances

should solid ice be forced off the liner. Solid ice

should be allowed to thaw when defrosting the

appliance. See defrost instructions.

¥ Do not place carbonated or fizzy drinks in the

freezer as it creates pressure on the container,

which may cause it to explode, resulting in

damage to the appliance.

Installation

¥ There are working parts in this product which

heat up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

¥ Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must

be replaced by a special cord or assembly

available from the manufacturer or its service

agent.

¥ Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

¥ If the appliance has been transported horizontally,

it is possible that the oil contained in the

compressor flows in the refrigerant circuit. It is

advisable to wait at least two hours before

connecting the appliance to allow the oil to flow

back in the compressor.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from municipal

authorities. The materials used on this appliance

marked by the symbol are recyclable.

It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred to another owner, or should you move house and

leave the appliance, always ensure that the book is supplied with the appliance in order that the new

owner can be acquainted with the functioning of the appliance and the relevant warnings.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock

(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old

appliance. This will prevent it from becoming a death-trap for a child.

These warnings are provided in the interest of safety. You must read them carefully before installing or

using the appliance.

Printed on recycled paper

WARNINGS

Warnings 22

Use 23

Cleaning the interior 23

Control panel 23

Operation 23

Temperature regulation 24

Fast freezing 24

Warning light 24

Freezing fresh food 24

Storage of frozen food 24

Thawing 24

Ice-cube production 24

Cold accumulator 24

Hints 25

Hints for freezing 25

Hints for storage of frozen food 25

Maintenance 26

Periodic cleaning 26

Periods of no operation 26

Defrosting 26

Customer service and spare parts 27

Installation 27

Location 27

Electrical connection 27

Rear spacers 28

Door reversal 28

Cleaning the interior

Before using the appliance for the first time, wash

the interior and all internal accessories with luke-

warm water and some neutral soap so as to remove

the typical smell of a brand-new product, then dry

thoroughly.

Do not use detergents or abrasive

powders, as these will damage the finish.

CONTENTS

USE

This freezer has been marked with the symbol, which means that it is suited to the freezing of fresh

foods, the conservation of frozen foods and the production of ice-cubes.

The control panel

DCB

A. N/S knob

B. Thermostat knob

C. Function indicator light

D. Quick-freezing indicator light

E. Temperature alarm light

Operation

Insert the plug into the wall socket. The pilot light

will light up, indicating that the appliance is in

operation.

To stop the appliance, turn the thermostat knob to

position Ç

È.

Zanussi ZV210R User manual

Brand: Zanussi

Model: ZV210R

Category: Fridge-freezers

Type: User manual

Download PDF

report

in other languages

français: Zanussi ZV210R Manuel utilisateur
español: Zanussi ZV210R Manual de usuario
português: Zanussi ZV210R Manual do usuário

Zanussi ZV210R User manual

Zanussi ZV210R User manual

in other languages

Related papers

Other documents