TS9030

TCL TS9030 User manual

Hello! I have analyzed the provided document about software upgrade instructions for the TCL TS9030 soundbar's WIFI module. This document explains the process of downloading the necessary software and using the USB Burning Tool for upgrading. It provides a detailed step-by-step guide, including how to put the sound bar into upgrade mode. I am prepared to answer your questions regarding the device and the upgrade process.
What tools are required for the WIFI module software upgrade?

Where can I download the WIFI module software and USB Burning tool?

What is the key sequence to put the sound bar into upgrade mode?

Infotech N°0002

TS9030 - Software Upgrade Method for WIFI Module

Topic:

This procedure includes software update method for WIFI module.

Tools required:

- Laptop

- TS9030 Ray-Danz Sound bar

- USB 2.0 to USB 2.0 Male Cable

Software upgrade method for WIFI Module:

Download the WIFI Module software from CRM:

 Login to your CRM account

 Go to the line Service  Tools  Software

 Select Category as SBAR and Chassis as AUDIO and SEARCH

Now you can download the WIFI module software from CRM.

Download the USB Burning tool from CRM:

 Login to your CRM account

 Go to the line Service  Tools  Software

 Select Category as SBAR and Chassis as AUDIO and SEARCH

Now you can download the USB Burning tool from CRM

Software update instructions:

1. Download the USB burning tool from CRM

2. Unzip the downloaded burning tool

3. Install the driver application:

 Now go to the driver application : USB_Burning_Tool 

WorldCup_DeviceInstallDriver

 Double click the InstallDriver and new window will appear (If your computer

password protected, here we need to enter the username and password and

click yes to proceed).

 Click Next

 Now driver will be installed automatically and click Finish.

4. Open the application : USB_Burning_Tool

Step-1:

Step-2:

Step-3:

- Import the downloaded WIFI module software package named “RSR-TCL-C4A-1.44-

V2.4-1082-USER-EU.img”

Step-4:

- Now connect your laptop to sound bar using USB 2.0 to USB 2.0 Male cable

Step-5: Put the sound bar in standby

When the sound bar is in standby mode, with the remote control do the key sequence

BASS  MUTE  TREBLE

Step-6: Now sound bar will display “UPG-D”

Step-7: USB_Burning_Tool will display “Connect Success” as follows

Step-8: Click Start to start the upgrading process

Step-9: Sound bar will be powered off after the complete update

Step-10: Disconnect all the connected cables and restart the sound bar.

/

Other documents