WaterWay 3J10070-1E User manual

Brand: WaterWay

Model: 3J10070-1E

Type: User manual

The WaterWay 3J10070-1E motor is a powerful and versatile pump, suitable for use with permanently installed pools, hot tubs, and spas. It features a 1-speed, 115V motor and is designed for use with 1.5-inch plumbing. With its durable construction and high-performance design, this pump is built to last and provide reliable operation for years to come.

MOTOR WIRING

1. Before working on any electrical connections be sure that the power is turned oﬀ.

2. All wiring must conform to local, state and/or national codes.

3. All wiring must conform to wiring diagram on the motor nameplate or on the back of the terminal cover.

4. Incoming line voltage must be within 10% of the nameplate voltage.

5. A solid copper bonding conductor no smaller than No. 8 AWG should be connected from the wire connector

on the motor to all metal parts of the spa or hot tub structure, and, to all electrical equipment, metal conduit,

and metal piping within ﬁve feet of the inside walls of a swimming pool, spa or hot tub when the motor is

installed within ﬁve feet of the inside walls of the spa or hot tub.

6. DO NOT ground to a gas supply line.

7. Ground motor prior to connecting to electrical power.

8. Improper grounding can cause serious injury and damage to the motor, voiding the warranty.

230V

1-Speed

Black

(Power)

Green (Ground)

IRON MIGHT PUMP INSTRUCTIONS

ALL ELECTRICAL INSTALLATIONS SHOULD BE PERFORMED BY QUALIFIED ELECTRICIANS

• WARNING: Risk of electrical shock. Connect only to a Ground-Type Receptacle protected by a Ground-Fault Circuit

Interrupter (GFCI). Potential risk of ﬁre, electric shock or injury to person if misused. Do not install within an outer

enclosure or beneath the skirt of the spa unless so marked.

• WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely

supervised at all times.

• CAUTION: This pump is for use with permanently installed pools and may also be used with hot tubs and spas

if so marked. Do not use with storable pools. A permanently installed pool is constructed in or on the ground

or in a building such that it cannot be readily disassembled for storage. A storable pool is constructed so that it

may be readily disassembled for storage and reassembled to its original integrity.

INSTALLATION INSTRUCTIONS

LOCATION: Place pump on level surface. Pump must be installed below water surface. Shut oﬀ valves should be

installed on both the inlet and outlet of the pump for future maintenance. Installation area should be clear of any

direct water and have adequate ﬂoor drainage. Pump should be protected from excessive moisture. Allow access

area large enough to service both pump and plumbing.

The inlet and outlet have Waterway male union threads. Use Waterway tailpiece assemblies for best connection.

These unions allow the pump to be removed for service without disturbing the plumbing.

HAND TIGHTEN UNIONS ONLY! DO NOT USE A WRENCH OR ANY ADHESIVES OR SOLVENTS!

DO NOT use pipe sealant. Use only Teﬂon tape or other sealing compounds approved for use with plastic. Some

pipe sealants not approved for use with plastic will cause stress cracking of plastic parts. New installations often

require plumbing inspections. This inspection is usually conducted using city water pressure. A pressure regulator

should be used when preforming this test and should not exceed 40 PSI during the pressure test. When the ﬁlter

and pump are under pressure, insure that all air is removed from the system. Extreme care must be taken during

the pressure test. FAILURE TO FOLLOW THESE INSTRUCTIONS EXPLICITLY CAN RESULT IN PERSONAL INJURY

AND WARRANTIES WILL BE VOIDED.

IMPORTANT SAFETY INSTRUCTIONS & WARNINGS • SAVE THESE INSTRUCTIONS • PLEASE READ AND FOLLOW ALL INSTRUCTIONS

White

(Common)

115V

1-Speed

Black (Power)

Green (Ground)

Ensure wiring circuit agrees with diagram and leads are securely tight.

810-0231.0618

2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403

www.waterwayplastics.com • [email protected]

Designed,

Engineered &

Manufactured

in the USA.

WARRANTY

For product registration visit: www.waterwayplastics.com.

For Warranty questions or claims please contact point of purchase.

IRON MIGHT WET END

6" TRAP ASSEMBLY

Motor

Screws

Faceplate Volute

O-Ring

Impeller Seal Kit

Volute

Housing

TROUBLESHOOTING

C HE CK VO LTA GE AT T ER MIN AL S

WIT H VOLT ME T ER .

MOTOR

WON'T

S TA RT: IF LO W VO LT S:

IF PR OPE R VO LTAG E:

IF 0 VO LTS :

FUS E / B RE AK ER

T RIPP ED GF I

D EFE C TIVE E XT ER NA L S WIT C H

C ALL E LE C TR IC IAN

INC O RR EC T O R LO OS E

C O NNE C T ION S

T HE RM AL P RO TE CT O R T RIPP ED

WIND ING S WIT C H OR

C APAC IT OR FAIL UR E

MOTOR

HUM S

WON'T

S TA RT:

C HE CK VO LTA GE

AT T ER MIN AL

WIT H VOLT ME T ER .

IF VO LTAG E IS NO T

WIT HIN 1 0% O F

NAM EP LAT E, C AL L

E LE C TR IC IAN.

IF PR OPE R VO LTAG E:

T IGHT PUM P

R EPL AC E F US E / R ES ET B RE AK ER .

R ES ET G FI.

C HE CK S WIT C H S ET TIN GS

AND C O NNE C TIO NS .

ALL OW MO TO R T O C OO L AN D RE STAR T.

INS UR E WIR ING C IR C UIT A GR EE S

WIT H DIA GRA M AND L EAD S ARE T IGHT.

S EE AN AU THO RIZ ED M OT OR

S ER VIC E C E NTE R.

S EIZ ED O R TIGH T MO TO R TAKE APA RT PUM P, T UR N MO TO R

BY HAN D. SE E AN AUT HO RIZ ED

MO T OR S ER VIC E C E NTE R.

WIND ING S WIT C H OR

C APAC IT OR FAIL UR E

S EE AN AU THO RIZ ED

MO T OR S ER VIC E C E NTE R.

MOTOR

NOIS Y :

C HE CK TO S E E T HAT

MO UNT ING IS S E C UR E:

BE NT S HAF T:

D ISAS S E MB LE PUM P AN D

R UN M OT OR S EPAR AT E

T O DE TE RM INE WHE TH ER

MO T OR NO IS E IS AC C E PTAB LE :

LO OS E M OUN TING T IGHT EN MO UNT ING .

BE AR ING N OIS E O R

R OT OR R UB S EE AN AU THO RIZ ED

MO T OR S ER VIC E C E NTE R.

S EE AN AU THO RIZ ED M OT OR

S ER VIC E C E NTE R.

MOTOR

R UNS ,

THE N

S T OP S :

C HE CK F OR M OT OR

O VER LO AD BY C HE CK ING

AM P DR AW AT MO TO R

T ER MINAL WIT H A MME TE R,

AM P DR AW S HO ULD B E WIT HIN 10 %

O F N AM EP LAT E.

IF MO TO R IS N OT

OVE R LO AD E D :

IF MO TO R IS

OVE R LO AD E D :

T RIPP ED B RE AK ER R ES ET B RE AK ER .

INAD EQ UAT E VE NT ILATIO N INC R EAS E VE NT ILAT ION.

INC O RR EC T L INE VO LTAG E C HEC K VO LTAG E, IF INC O RR EC T

C ALL A N EL EC T RIC IAN .

INC O RR EC T W IRING

INS UR E T HAT WIR ING C IR C UIT A ND

WIR ING DIA GR AM AR E THE S AM E.

INC O RR EC T VO LTAG E

INC O RR EC T W IRING

PUM P B IND ING

MO T OR BIN DIN G

C HE CK VO LTA GE, IF IN C OR RE C T,

C ALL A N EL EC T RIC IAN .

INS UR E T HAT WIR ING C IR C UIT A ND

WIR ING DIAGR AM AR E T HE S AM E.

TAKE APA RT PUM P, LO OK

FO R S IGN S OF R UBB ING .

IF MO TO R WIL L NOT T UR N BY ITS EL F

S EE AN AU THO RIZ ED M OT OR S E RVIC E C EN TE R.

PUMP

R UNS ,

FLOW:

C HE CK S HUT O FF

VALVE S : VALVE S C LO S ED O PE N VALVE S .

C HE CK TO S E E T HAT PUM P IS

BE LO W WAT ER L EVE L:

C HE CK S HUT O FF VALVE S :

PUM P AB OVE WAT ER L EVE L R EPL UM B PUMP B EL OW WAT ER L EVEL .

AIR L OC K R EM OVE D RA IN PL UG UN TIL WAT ER F LO WS

FR OM P UM P. R E PL AC E D RAIN

PL UG AN D S TAR T PUM P.

PUMP

R UNS ,

NOT

ENO UGH

FLOW:

VIS IB LE AIR BUB BL ES

IN RE TUR N LIN E:

C HE CK TO S E E

T HAT VALVE S AR E

C OM PL ET ELY OPE N:

C HE CK F ILTE R

PR ES S URE G AU GE:

LE AK IN S UC T ION PL UM BING R EPL UM B PUMP B EL OW WAT ER L EVEL .

PA RT IAL LY C LO SE D VALVE S O PE N VALVE S .

D IRTY IM PE LL ER O R FILT ER C L EAN FILT ER O R IM PE LL ER .

TAKE APA RT PUM P,

LO OK F OR S IG NS OF R UBB ING .

Lid

Basket

O-Ring

1 ½" Union

Gasket

1 ½"

Split Nut

6" Trap Body

1 ½" FTP / 1 ½" Buttress

x 1 ½" Union Flange

Quarter

Slot Plug

810-0231.0618

WaterWay 3J10070-1E User manual

WaterWay 3J10070-1E User manual

WaterWay 3J10070-1E User manual

Related papers

Other documents