Lumenier QAV-S 2 User manual

Brand
Lumenier
Model
QAV-S 2
Type
User manual
parts needed for this assembly
top plate
20mm
standoff
split plate
front
5 inch
arm
fpv camera
mount left
fpv camera
mount right
x-lock fc
isolator
x-lock arm
wedge
gopro
mount
spacer
plate
battery
pad
split plate
rear
M3x6mm
screws
M3x16mm
screws
M3x6mm
screws
X4
X4 X6
X1
X1 X1 X4
X1
X1 X1
X2
X1
X1
X1
M3x8mm
screws
X1
X4
X13
M3x16mm
screws
X2
M3x22mm
screws
M3x8mm
screws
X16
M2x4mm
screws
X4 X1
battery
strap
split plate
front
5 inch
arm
fc
isolator
arm
wedge
split plate
rear
M3x6mm
screw
M3x16mm
screws
M3x22mm
screws
M3x6mm
screws
Start the assembly by using the
split rear plate to mount the
x-lock fc isolator with the
M3x22mm and the M3x6mm
screws.
1.
Secure the arms by tightening
the x-lock arm wedges using
the M3x16mm
screws to lock them in place.
2.
Add the split front plate
to the assembly and use
the M3x6mm in the middle
to secure it.
3.
20mm
standoff
fpv camera
mounts
gopro
mount
spacer
plate
battery
pad
M3x16mm
screws
M3x6mm
screws
M3x6mm
screws
M3x6mm
screws
M3x8mm
screws
battery strap
Use the M3x6mm button head screws
to secure the standoffs and the fpv
camera mounts to the split plates.
Use the M3x16mm through the arms
into the standoffs.
4.
Secure the top plate to the assembly by using the
M3x6mm button head screws in the front and the
M3x6mm countersink head screws in the back.
5.
Add the gopro mount and the
spacer plate together with a
M3x8mm screw, and finish the
build by sticking the battery pad
and the strap.
6.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lumenier QAV-S 2 User manual

Brand
Lumenier
Model
QAV-S 2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents