Compressor Store Atlas Compressor Operating instructions

Hello! I've had a look at the Atlas Compressor Firmware Update Guide and Version History and I'm ready to answer your questions about it. The document covers how to update your Atlas Compressor using the Neuro Desktop Application, and it also details the changes introduced in version 1.11, such as the frequency response extension and the new noise gate operation.
How is the Atlas Compressor updated?

What is needed to update the Atlas Compressor?

What is new in firmware version 1.11?

Atlas Compressor Firmware Update

Guide and Version History

Introduction

Thank you for purchasing the Atlas Compressor. We at Source Audio are constantly working to maintain and improve

our existing products. In order to add new features, engines, or fix functional issues, we will occasionally release

firmware updates. Updates for the Atlas are done exclusively through the Neuro Desktop Application.

Connect the 9V power supply to the Atlas and USB to your Mac or Windows computer. Open the Neuro Desktop

application and the Atlas will appear in the Connections tab. click the (Update Device) button to download the

update. If a newer file isn’t automatically found, select the option to manually locate a file and navigate to the desired

.saxf file on your system. Do not disconnect or power off your pedal while the update is running.

Firmware Version History

Version 1.10 (Initial Public Release)

Version 1.11 – 7/28/2022 release date

• New hardware option added for flatter frequency response out to 20kHz for acoustic, synth, etc. applications.

The new option is called “Frequency response extension to 20kHz”.

• Changed the functionality of the Noise Gate so that the lowest setting of the knob disables the gate completely.

Update Device button