Okina USA VA122BNC Owner's manual

  • Hello, I've reviewed the datasheet for the OKI Video Distributor VA122BNC. This document details a video distributor with one input and two outputs, suitable for various video transmission setups. It includes information on installation, troubleshooting, and specifications. I'm ready to assist with any questions about this device that you might have.
  • What is the purpose of the VA122BNC device?
    What devices can be connected to the VA122BNC?
    What should I do if there is no video signal after installation?
    What should I do if the video signal is not normal?
Coaxial Cabling : Video Distributor Series
ITEM NO.: VA122BNC
VA122BNC is video distributors with one or multi video input to multi output. It is suitable
for far distance, different floor in a building or different electrical field.
Features:
Video Distributor
VA122BNC 1 Input to 2 Output
z Red LED: power on/off.
z It can be connected video camera, multiplexer, VCR, DVR…etc.
z Power supply included.
Installation View:
Troubleshooting:
All transmission distances mentioned above are without connecting image processor (e.g. Quad,
Multiplexer, DVR), the transmission range would be reducin100-200meters upon different camera,
cable,DVR…ect.
1. When finish the installation, but no video signal, please checks Power LED and power source.
2. Video signal is not normal; please check “” and “” of cable.
Specifications:
ITEM NO. VA122BNC
Video Input Channel 1
Video Output Channel 2
Audio Input Channel x
Audio Output Channel x
Video Input Level 0.8~1.2Vp-p, 75 Ohms
Video Output Level 1Vp-p (Standard), 75 Ohms
Video Bandwidth 10hz - 10MHz
Transmission Range X
Power Supply DC12V
Power Consumption 100mA
Dimensions W x H x D mm 72x50x32
Weight g 90
Material ABS Black
/