2. Daytona
  3. 59239
59239

Daytona 59239 Operating instructions

  • Hello! I've reviewed the instructions for installing the Replacement Handle for your jack. This document contains two methods for handle installation: using the handle release and using the handle release bolt. It also explains step-by-step to ensure the handle is properly attached and that the jack is working correctly. I am ready to answer any questions you may have about this document.
  • How do I install the handle using the Handle Release?
    How do I install the handle using Handle Release Bolt?
    What should I do after installing the handle?
For technical questions, please call 1-888-866-5797.
UPC 193175462862
Instructions
Attach to Jack with
Handle Release
1. To install Handle, pull on Handle
Release and insert the grooved end of
the Handle into the Handle Socket.
2. Let go of the Handle Release.
Gently pull up on the Handle to
make sure that it is secure.
3. Check that Jack operates correctly.
Attach to Jack with
Handle Release Bolt
1. To install Handle, loosen Handle
Release Bolt and insert the grooved end
of the Handle into the Handle Socket.
2. Tighten Handle Release Bolt.
Gently pull up on the Handle to
make sure that it is secure.
3. Check that Jack operates correctly.
Handle Release
Handle
Socket
Handle
Release Bolt Handle
Socket
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
21k
/