Bematech BR-2008T Quick start guide

Brand: Bematech

Model: BR-2008T

Type: Quick start guide

lmportant Notice

This

Quick

start Guide is a short description of the bar

code scanners BR-2008T and

5.2008I, ¡ncluding basic information regarding

installation and operation. For detailed

configuration

information on th¡s

product, please

check the User's Manual available

at our

webs¡te

"Support"

section:

www.bematechus.com

No warranty of any kind is made in regard to this material,

including, but not l¡mited to,

impl¡ed warranties of merchantabili§ or fitness for a

particular purpose.

We are not

liable

for any

errors conta¡ned herein or incidental or consequential

damages ¡n connection

with furn¡shing,

performance

or use of this material.

Laser safety

(model

S-2008T)

The laser

scanner compl¡es

with safety standard IEC 60825-1 for a Class 2 laser

produce.

Charging the

Device

il¡ilililililll]

iluiltilililffiffill]

Start

Scanner SPP Master enable

3. Scan

"Set

wireless

address" to set the address.

iluiltilililffiiltilll]

Set wireless address

(§PP

Master only)

4. Use the ASCII table ¡n

section to input the 12 digit wireless

address.

For

example: ifthe address

"01181345600",scan"U',"d',

scan the address lable if available.

ffi

llJ'.,..,.....4,

KL8+RD

Power On/Off the

Device

Ensure the battery

is fully charged. Please refer to the

section

to charge

the battery.

Press and hold the Power Button for 1 second

until a long beep sound

is heard to turn on the scanner.

power

off the

scanner

press

and hold the Off Button for 1 second

until 2 short beeps are heard.

lnstalling Battery

1.. Unlock and remove the back cover then insert the battery.

Warning:

Do not open with force.

Please unlock before

2. Place the back cover back on the scanner and move the lockto

the lock

position.

Chareine the

Battery

There are two method to chárge scanner via USB cable.

Host

USB

Power

Poweradaptor

Connect

the micro USB connector d¡rectly to the scanner.

2, Connect the other

end

the

USB connector to the

host to begin

charging. You can also connect the USB cable to an outlet using the

power

adapter to charge the battery.

3. The battery begins charging when the scanner

LED indicator starts

flashing. LED turns steady

green

when charging is completed.

§eg-rcsterl4gdC {Scanner

as H ost}

1. Power on of the remote device

and

have its address

ready in hand and

make it discoverable.

2. Program

the scanner

with the "SPP Master enable" barcode.

ilfiilililllilll]

ruuru[[Fl

should be heard upon connection.

Pairing the Device

il1ililililtillil

SPP Slave

Mode

(PC

as Host)

To connect a wireless device to Window based

system for the first time:

Turn on the host computer

and activate ¡ts w¡reless connection.

Select 'Add wireless device".

Or open the dialog BT devices and click

'Add".

Power on the scanner and

program

it w¡th 'SPP Slave mode" label.

rr¡fftiltililffitil]llll

Start

Scanner SPP Slave enable

End

Devices tab, click Add. This will open the Add wireless Device

Wizard.

Select the

"My

device ¡s set up and ready to be found" checkbox, and

then cl¡ck Next.

The scanner should be on the

list

of discoverable

devices. The default

name of the scanner is

"BR/S-200BT".

Select "BR/S-2008T" and click

"Next".

Select "Let

choose

own

passkey"

and enter the

code. The

default

code is "12345678.

Click "Next" to connect the scanner to the

host. A short beep should be

heard upon connect¡on.

HID/Smart

Phone

mode

1. Power on the scanner

ánd

progÉm

it with "BT HID Mode" if necessary.

To connect a smart mobile

phone

(for

example, iPhone, Android), the

Smart

phone

mode must also be enabled.

iNote:

Scanner ¡s

preprogrammed

with BT HID mode as

default.

llltilllilffiflilI]illl

BT HID mode

fi]iltililililflililril

il1lilililililllilll

Smart

phone

mode

End

Enable wireless connection on

your

host and set it to discover other

wireless devices in its surround¡ng.

The scanner

should be on

the list of discoverable devices. The default

name of the scanner is "BR/S-200BT". Select "BR/S-2008T" from the list

and

you

will be

prompted

to enter a

paring pin

code.

To input the

code, use the scanner to scan the ASCII table in

sect¡on. For example: ¡f the

p¡n

code is "0111", scan "0", "!",

"L", "L"

from

ASCII barcode labels.

Scan the Enter barcode to confirm.

Scan

"Confirm

Settine" to store the address.

ilflililililffiililll

Confirm Setting

(for

address and

code

setting

required)

Illil]fliltillil1iltiltilt

Required Pair with slave

(SPP

Master)

Setup and

input

the

code if necessary. Scan

"Required

Pa¡r with

slave

(SPP

Master)" to begin

pairing.

A short beep

ASCII Table

bematech

Handy

Wireless Scanner

ilililIililil¡t ,

ilililtil]lil

lllllllllllllll,

|1ilillil|llr

ililil | ilil |till

Enter

ililililt¡il ,

ilill1il|ilt .

Items

contain

in the

package

may vary depending on

the model of the scanner

Package Contents

Wireless scanner

with battery

Micro USB

slot

LED

lndicator

Power Button

/Scan

Trigger

Off Button

Hand

Strap

Hole

il¡lrih

,-,utd':

Batte ry

Com

partment

Scan Window

Dongle Quick

Guide

ffia

USB Cable

Power Adapter Hand Strap

lilllilililil|

llililililIilI ,

Scanner Outline

Back Cover

Lock

M¡cro

USB

slot Used for communication and c

LED Indicaror

ndicates

lhe scann

stat-s

Press to

power

on or scan barcodes

Press to turn the device off

Hand Strap Hole

Used to attach hand straps

Secures the battery compartrnent

Power Button/Scan Tr

Battery

Compartment

Batteries are stored here

S.qIUlfq

lfrnrts

ared beam

for

barcode

readrng

*i!.te:

Actual

product

appearance may vary from the images on

this

page

Bematech BR-2008T Quick start guide

Bematech BR-2008T Quick start guide

Bematech BR-2008T Quick start guide

Related papers

Other documents