Bematech Aquila S-3200 Quick start guide

Page is loading ...

10

Quickstart Guide of Barcode Reader Aquila S-3200

P/N: 501004800 - Revision 1.0

March 2010 (First Edition)

No part of this publication may be copied, reproduced, adapted or translated without the prior written permission of

Bematech S.A., except when allowed by patent rights.

Information in this publication is purely informative, subjected to change without notice and no liability is assumed with

respect to its use. However, as product improvements become available, Bematech S.A. will make every effort to provide

updated information for the products described in this publication. The latest version of this manual can be obtained

through Bematech website:

bematech.com

Notwithstanding the other exceptions contained in this Manual, the consequences and responsibility are assumed by the

Purchaser of this product or third parties as a result of: (a) intentional use for any improper, unintended or unauthorized

applications of this product, including any particular purpose; (b) unauthorized modifications, repairs, or alterations to this

product; (c) use of the product without complying with Bematech S.A. Corporation’s operating and maintenance

instructions; (d) use of the product as component in systems or other applications in which the failure of this could create a

situation where personal injury or material damages may occur. In the events described above, Bematech S.A. and its

officers, administrators, employees, subsidiaries, affiliates and dealers shall not be held responsible or respond by any

claim, costs, damages, losses, expenses and any other direct or indirect injury, as well as claims which alleges that

Bematech S.A. was negligent regarding the design or manufacture of the product.

Bematech S.A. shall not be liable against any damages or problems arising from the use of any options or any consumable

products other than those designated as original Bematech products or approved products by Bematech S.A.

Any product names or its logotypes mentioned in this publication may be trademarks of its respective owners and shall be

here recognized.

Product warranties are only the ones expressly mentioned in the User’s Manual. Bematech S.A. disclaims any and all

implied warranties for the product, including but not limited to implied warranties of merchantability or fitness for a

particular purpose. In addition, Bematech S.A. shall not be responsible or liable for any special, incidental or

consequential damages or lost profits or savings arising from the use of the product by the Purchaser, the User or third

parties.

11

GENERAL INFORMATION

General handling precautions

Do not dispose of the scanner in fire.

Do not put the scanner directly in the sun or by any heat source.

Do not use or store the scanner in a very humid place.

Do not drop the scanner or allow it to collide violently with other objects.

Do not take the scanner apart without authorization.

Radio Notice

Some equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance

with the instructions in this manual, it may cause interference to radio communications. The equipment has been

tested and found to comply with the limits for a Class A computing device pursuant to EN55022 and 47 CFR, Part

2 and Part 15 of the FCC rules. These specifications are designed to provide reasonable protection against

interference when operated in a commercial environment.

Radio and Television Interference

Operation of this equipment in a residential area can cause interference to radio or television reception. This can

be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna.

Relocate the device with respect to the receiver.

Move the device away from the receiver.

Plug the device into a different outlet so that the device and the receiver are on different branch

circuits.

If necessary, the user may consult the manufacturer, authorized dealer, or experienced radio/television technician

for additional suggestions. The user may find the following booklet prepared by the Federal Communications

Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available

from the U.S. Government Printing Office, Washington, DC 20402 U.S.A., Stock No. 004000003454.

For CE-countries

This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit

should be used in order to maintain CE conformance.

Laser Safety

The Advanced Compact Dual-Laser Omnidirectional Vertical Scanner complies with safety standard IEC 60825

for a Class I laser product. It also complies with CDRH as applicable to a Class IIa laser product. Avoid long term

staring into direct laser light.

Radiant Energy

The Dual-Laser Omnidirectional Vertical Scanner uses two low-power visible laser diodes operating at 650nm in

an opto-mechanical scanner resulting in less than 3.9μW radiated power as observed through a 7mm aperture and

averaged over 10 seconds.

Do not attempt to remove the protective housing of the scanner, as unscanned laser light with a peak output up to

0.8mW would be accessible inside.

Laser Light Viewing

The scan window is the only aperture through which laser light may be observed from this product. A failure of the

scanner motor, while the laser diode continues to emit a laser beam, may cause emission levels to exceed those for

12

safe operation. The scanner has safeguards to prevent this occurrence. If, however, a stationary laser beam is

emitted, the failing scanner should be disconnected from its power source immediately.

Adjustments

Do not attempt any adjustments or alteration of this product. Do not remove the protective housing of the scanner.

There are no user-serviceable parts inside.

Caution

Use of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous laser light exposure.

Optical

The use of optical instruments with this product will increase the eye hazard. Optical instruments include

binoculars, magnifying glasses, and microscopes but do not include normal eye glasses worn by the user.

13

1)

INTRODUCTION

The S-3200 scanner package contains:

1)

Advanced compact dual-laser omnidirectional vertical

scanner

2)

Communication cable (Model depends on customer needs.)

3)

9V power adapter

(Model depends on electrical requirements of your

geographic location)

1.1)

Outline

14

Description Function

Scan Window Read barcodes

Speaker Exit For beep tone indication

LED Indicator Reading status indication

Tone Adjustment Adjusting sound indication tone

Volume Adjustment Adjusting sound indication volume

Back Mounting Holes For permanent fixture (optional)

Cable Release Hole Connecting communication cable

Interface Cable Connection For interface communication cable connection

AUX Connection Connecting an auxiliary scanner (optional)

EAS Connection For EAS application (optional)

15

2)

INSTALLATION

The scanner is to be connected to a host (e.g. POS). The use of external power is determined by your host but it is

usually recommended. The scanner also supports an auxiliary scanner and EAS application.

The scanner must be installed always in a vertical position.

3)

PROGRAMMING

To start the programming steps for your S-3200 Omnidirectional Scanner, please download the latest version of

the User Manual through Bematech website:

bematech.com

Page is loading ...

Bematech Aquila S-3200 Quick start guide

Bematech Aquila S-3200 Quick start guide

in other languages

Related papers

Other documents