Abstract Data MORPHEX User manual

Brand
Abstract Data
Model
MORPHEX
Type
User manual
© 2009 Abstract Data Ltd. http://www.abstractdata.biz/ [email protected] Version 1.1 August 2009
User Guide
Hybrid Analog Synth & Effect Unit
Hybrid Analog Synth & Effect Unit
© 2009 Abstract Data Ltd. http://www.abstractdata.biz/ [email protected] Version 1.1 August 2009
Page 1 of 4
ON: Left: Power On
Right: Power Off
SWAP: Left:
SOURCE IN = Main Audio Signal / CARRIER IN = Modulation Audio Signal
Right: SOURCE IN = Modulation Audio Signal / CARRIER IN = Main Audio Signal
TRIP: Left (if SWAP = Left): SOURCE IN = Main Audio Signal / CARRIER IN = Modulation Audio signal
Left (if SWAP = Right): SOURCE IN = Modulation Audio Signal / CARRIER IN = Main Audio Signal
Right (if SWAP = Left): SOURCE IN = Main Audio Signal and Modulation Audio Signal
Right (if SWAP = Right): CARRIER IN = Main Audio Signal and Modulation Audio Signal
LED: Power On indicator
SOURCE: Sets the amount of SOURCE IN (Main Audio Signal) sent to AUDIO OUT
This control operates in conjunction with the SWAP and TRIP switches
CARRIER: Sets the amount of CARRIER IN (Modulation Audio Signal) sent to AUDIO OUT
This control operates in conjunction with the SWAP and TRIP switches
INTENSITY: Sets the amount of Effected Audio Signal sent to
AUDIO OUT
OVERLOAD: Sets the amount of Main Audio Signal to send to FEEDBACK
MORPH: Sets the amount of Modulation Audio Signal to send to FEEDBACK
FEEDBACK: Sets the amount of Modulation applied to the Main Audio Signal
This control can also be used to force Morphex into self-oscillation
Hybrid Analog Synth & Effect Unit
© 2009 Abstract Data Ltd. http://www.abstractdata.biz/ [email protected] Version 1.1 August 2009
Page 2 of 4
AUDIO OUT: Main Audio Output: 6.5mm (1/4”) Mono Socket
CARRIER IN: Modulation Audio Signal Input
Line-Level Audio Signal
6.5mm (1/4”) Mono Socket
SOURCE IN: Main Audio Signal Input
Line-Level Audio Signal
6.5mm (1/4”) Mono Socket
*POWER IN: 12 Volt DC @ approx. 300mA
2.1mm Socket
Tip = Negative
Using the wrong adapter can cause damage to your instrument.
Please make sure you are using a good quality, balanced adapter with an Earth
plug set to the correct Voltage and Polarity.
Please also conserve energy and resources by powering down and unplugging
Morphex when it is not is use.
*Power adapter not included
SPECIFICATIONS: Dimensions (mm): (W) 132 x (H) 68 x (D) 77
Weight (kg): 0.45
Case Construction: 0.9mm Mild Steel (CR4)
© 2009 Abstract Data Ltd. http://www.abstractdata.biz/ [email protected] Version 1.1 August 2009
Page 3 of 4
Hybrid Analog Synth & Effect Unit
AUDIO INPUT OPTIONS:
SIGNAL PATH:
1) Dual Mono Signals
2) Split Stereo Signal
3) Split Mono Signal
Mono Audio
Mono Audio
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
Mono Audio
Stereo Audio (Left)
Stereo Audio (Right)
SOURCE
IN
CARRIER
IN
SOURCE
CARRIER
OVERLOAD
MORPH
AUDIO
OUT
Mixer
SWAP TRIP FEEDBACK
INTENSITY
Splitter
© 2009 Abstract Data Ltd. http://www.abstractdata.biz/ [email protected] Version 1.1 August 2009
Page 4 of 4
MORPHEX SETTINGS: Print or photocopy this sheet to record the settings of your favourite sounds.
Description:
––––––––––––––––––––––
––––––––––––––––––––––
––––––––––––––––––––––
SOURCE IN:
––––––––––––––––––––––
––––––––––––––––––––––
CARRIER IN:
––––––––––––––––––––––
––––––––––––––––––––––
Description:
––––––––––––––––––––––
––––––––––––––––––––––
––––––––––––––––––––––
SOURCE IN:
––––––––––––––––––––––
––––––––––––––––––––––
CARRIER IN:
––––––––––––––––––––––
––––––––––––––––––––––
Description:
––––––––––––––––––––––
––––––––––––––––––––––
––––––––––––––––––––––
SOURCE IN:
––––––––––––––––––––––
––––––––––––––––––––––
CARRIER IN:
––––––––––––––––––––––
––––––––––––––––––––––
Hybrid Analog Synth & Effect Unit
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Abstract Data MORPHEX User manual

Brand
Abstract Data
Model
MORPHEX
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents