Video Flex 7700
Network Camera
Video Flex 7700
Network Camera
An image is generated and
transmitted over the network by the
Video Flex Network Camera in this
classroom (A).
RJ45
Jack
Through the network connection the
demonstration from the Video Flex in
A is being projected onto a screen in
this classroom.
Through the network connection
the demonstration from the Video
Flex in A is being projected onto
a screen in this classroom.
Through multiple network connections, the
image from the Video Flex in classroom A is
being broadcast to multiple computers.
Classroom
A
School Network
Ken-A-Vision
®
introduces its newest addition
to the world of ‘network-able’ cameras.
The Video Flex
®
7700 Network Ready
Camera has been designed from the
ground up to redefine teaching and
learning.
It’s a great addition to your laptop storage cart. It plugs straight into the network and can be accessed by any
computer on the same network.
Ken-A-Vision Mfg. Co., Inc. 䉬 5615 Raytown Road 䉬 Kansas City, MO 64133
1-800-334-8407 䉬 www.ken-a-vision.com FLY-7700-2
Configure your 7700 with the appropriate IP
address and network settings, as determined by a
network administrator.
Check the network settings of your 7700 at a glance,
including the MAC address.
Configure multiple accounts to log in to the 7700,
with different permissions levels. Set users to have
either view-only access, or full control of the device.
Upgrade the 7700 quickly and easily in the event of
a released firmware revision.
There is no software to install! It works using any
web browser.
The Video Flex
®
Network Camera comes complete with the
following administrative features:
/
