Operating Instructions
Theaircompressorisdesignedtoinateautomotiveandlighttrucktyrestothe
manufactures recommended pressure.
Itcanalsobeusedtoinatesmalllowpressureinatablessuchassportballs&air
cushions.
Preparation for use:
Before plugging in the compressor ensure switch is in the “OFF” position.
If the compressor does not function check the power connection is secure.
Note:Youmayhavetoturnthecarignitionon(toposition‘I’)beforestartingthe
compressor.Thisisnormallytherstpositionwithoutthecaractuallystarting.
Warning
Always check that the car is in neutral and the handbrake is on.•
This compressor is designed for use with a car 12V DC power supply; do not •
connect to any other type of electrical power.
Power connection:
Pull out the air supply cable and the power cord. •
Plugthepowercordintothe12VDCcigarettesocket(Note:Checkthatthe•
compressorswitchisinthe‘OFF’position).
Using the Compressor:
Attachtheairsupplycable(Dia.6,item1)securelytothetyrevalveorotheritem•
tobeinated,useadaptorsifnecessary.
Presstheairswitchtothe“ON”position,thecompressorwillstart.•
Inatethetyre(orotheritem)tothepressurerequiredthenswitchthe•
compressor‘OFF’.
Disconnecttheairsupplyfromthetyrevalveorinatable. •
Note:wheninatingatyrealwaysdoublechecktheairpressuresusingan
accurate pressure gauge i.e. pencil gauge / digital gauge.
Light Functions
Turnthelightswitchtotheashposition,fora3LEDashwarningsignal•
Turnthelightswitchtothelightposition,fora4LEDworklight.•
Technical Specications
Power requirement: 12V dc
Wattage: 120W
Maximumairow: 22L/m
Duty Cycle: 15 minutes ON / 30 Minutes OFF
-2-